I want to do something like this:
function('string', function2(){})
where I leave the to user to write what he wants in the string parameter and than execute function2.
The catch is here: string is an event listener. When the user writes click, I want to call onClick(), when the user writes mouse I want to call onMouseOver and so on.
I have in mind doing something with case, but how can I access all event listeners?
You should use addEventListener.
element.addEventListener("string", function() {}, false);
However, in the case of IE <= 8, you will need to use attachEvent as it does not follow the standard:
element.attachEvent("string", function() {});
Finally, as kybernetikos mentions in his comment, you can then use a simple dictionary to map mouse to mouseover.
If you wish to fire events, you should use dispatchEvent.
If you add the event listeners using the old model (i.e. elem.onclick = function(){ /* */ };), you can use
elem['on' + event]();
Keep in mind that this only fires the event listeners, but doesn't create an event (e.g. it won't bubble).
If you won't to create a event, which fires event listeners added using addEventlistener, and bubbles, and does all things a real event does, you must
Create your event using event constructors: Event or CustomEvent
Fire it with dispatchEvent
See MDN page for more information and examples.
you can use .trigger to do this. Check out this example in jsfiddle. type "dblclick" in the input box.
http://jsfiddle.net/jspatel/Suj4H/1/
<input id="writehere"> </input>
$('#writehere').dblclick(function() {
alert ('dblclick');
});
$('#writehere').bind('keypress', function(e) {
if(e.keyCode==13){
$(this).trigger( $(this).val() );
}
});
Related
I have an input type="image". This acts like the cell notes in Microsoft Excel. If someone enters a number into the text box that this input-image is paired with, I setup an event handler for the input-image. Then when the user clicks the image, they get a little popup to add some notes to the data.
My problem is that when a user enters a zero into the text box, I need to disable the input-image's event handler. I have tried the following, but to no avail.
$('#myimage').click(function { return false; });
jQuery ≥ 1.7
With jQuery 1.7 onward the event API has been updated, .bind()/.unbind() are still available for backwards compatibility, but the preferred method is using the on()/off() functions. The below would now be,
$('#myimage').click(function() { return false; }); // Adds another click event
$('#myimage').off('click');
$('#myimage').on('click.mynamespace', function() { /* Do stuff */ });
$('#myimage').off('click.mynamespace');
jQuery < 1.7
In your example code you are simply adding another click event to the image, not overriding the previous one:
$('#myimage').click(function() { return false; }); // Adds another click event
Both click events will then get fired.
As people have said you can use unbind to remove all click events:
$('#myimage').unbind('click');
If you want to add a single event and then remove it (without removing any others that might have been added) then you can use event namespacing:
$('#myimage').bind('click.mynamespace', function() { /* Do stuff */ });
and to remove just your event:
$('#myimage').unbind('click.mynamespace');
This wasn't available when this question was answered, but you can also use the live() method to enable/disable events.
$('#myimage:not(.disabled)').live('click', myclickevent);
$('#mydisablebutton').click( function () { $('#myimage').addClass('disabled'); });
What will happen with this code is that when you click #mydisablebutton, it will add the class disabled to the #myimage element. This will make it so that the selector no longer matches the element and the event will not be fired until the 'disabled' class is removed making the .live() selector valid again.
This has other benefits by adding styling based on that class as well.
This can be done by using the unbind function.
$('#myimage').unbind('click');
You can add multiple event handlers to the same object and event in jquery. This means adding a new one doesn't replace the old ones.
There are several strategies for changing event handlers, such as event namespaces. There are some pages about this in the online docs.
Look at this question (that's how I learned of unbind). There is some useful description of these strategies in the answers.
How to read bound hover callback functions in jquery
If you want to respond to an event just one time, the following syntax should be really helpful:
$('.myLink').bind('click', function() {
//do some things
$(this).unbind('click', arguments.callee); //unbind *just this handler*
});
Using arguments.callee, we can ensure that the one specific anonymous-function handler is removed, and thus, have a single time handler for a given event. Hope this helps others.
maybe the unbind method will work for you
$("#myimage").unbind("click");
I had to set the event to null using the prop and the attr. I couldn't do it with one or the other. I also could not get .unbind to work. I am working on a TD element.
.prop("onclick", null).attr("onclick", null)
If event is attached this way, and the target is to be unattached:
$('#container').on('click','span',function(eo){
alert(1);
$(this).off(); //seams easy, but does not work
$('#container').off('click','span'); //clears click event for every span
$(this).on("click",function(){return false;}); //this works.
});
You may be adding the onclick handler as inline markup:
<input id="addreport" type="button" value="Add New Report" onclick="openAdd()" />
If so, the jquery .off() or .unbind() won't work. You need to add the original event handler in jquery as well:
$("#addreport").on("click", "", function (e) {
openAdd();
});
Then the jquery has a reference to the event handler and can remove it:
$("#addreport").off("click")
VoidKing mentions this a little more obliquely in a comment above.
If you use $(document).on() to add a listener to a dynamically created element then you may have to use the following to remove it:
// add the listener
$(document).on('click','.element',function(){
// stuff
});
// remove the listener
$(document).off("click", ".element");
To remove ALL event-handlers, this is what worked for me:
To remove all event handlers mean to have the plain HTML structure without all the event handlers attached to the element and its child nodes. To do this, jQuery's clone() helped.
var original, clone;
// element with id my-div and its child nodes have some event-handlers
original = $('#my-div');
clone = original.clone();
//
original.replaceWith(clone);
With this, we'll have the clone in place of the original with no event-handlers on it.
Good Luck...
Updated for 2014
Using the latest version of jQuery, you're now able to unbind all events on a namespace by simply doing $( "#foo" ).off( ".myNamespace" );
Best way to remove inline onclick event is $(element).prop('onclick', null);
Thanks for the information. very helpful i used it for locking page interaction while in edit mode by another user. I used it in conjunction with ajaxComplete. Not necesarily the same behavior but somewhat similar.
function userPageLock(){
$("body").bind("ajaxComplete.lockpage", function(){
$("body").unbind("ajaxComplete.lockpage");
executePageLock();
});
};
function executePageLock(){
//do something
}
In case .on() method was previously used with particular selector, like in the following example:
$('body').on('click', '.dynamicTarget', function () {
// Code goes here
});
Both unbind() and .off() methods are not going to work.
However, .undelegate() method could be used to completely remove handler from the event for all elements which match the current selector:
$("body").undelegate(".dynamicTarget", "click")
I know this comes in late, but why not use plain JS to remove the event?
var myElement = document.getElementById("your_ID");
myElement.onclick = null;
or, if you use a named function as an event handler:
function eh(event){...}
var myElement = document.getElementById("your_ID");
myElement.addEventListener("click",eh); // add event handler
myElement.removeEventListener("click",eh); //remove it
This also works fine .Simple and easy.see http://jsfiddle.net/uZc8w/570/
$('#myimage').removeAttr("click");
if you set the onclick via html you need to removeAttr ($(this).removeAttr('onclick'))
if you set it via jquery (as the after the first click in my examples above) then you need to unbind($(this).unbind('click'))
All the approaches described did not work for me because I was adding the click event with on() to the document where the element was created at run-time:
$(document).on("click", ".button", function() {
doSomething();
});
My workaround:
As I could not unbind the ".button" class I just assigned another class to the button that had the same CSS styles. By doing so the live/on-event-handler ignored the click finally:
// prevent another click on the button by assigning another class
$(".button").attr("class","buttonOff");
Hope that helps.
Hope my below code explains all.
HTML:
(function($){
$("#btn_add").on("click",function(){
$("#btn_click").on("click",added_handler);
alert("Added new handler to button 1");
});
$("#btn_remove").on("click",function(){
$("#btn_click").off("click",added_handler);
alert("Removed new handler to button 1");
});
function fixed_handler(){
alert("Fixed handler");
}
function added_handler(){
alert("new handler");
}
$("#btn_click").on("click",fixed_handler);
$("#btn_fixed").on("click",fixed_handler);
})(jQuery);
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<button id="btn_click">Button 1</button>
<button id="btn_add">Add Handler</button>
<button id="btn_remove">Remove Handler</button>
<button id="btn_fixed">Fixed Handler</button>
I had an interesting case relevant to this come up at work today where there was a scroll event handler for $(window).
// TO ELIMINATE THE RE-SELECTION AND
// RE-CREATION OF THE SAME OBJECT REDUNDANTLY IN THE FOLLOWING SNIPPETS
let $window = $(window);
$window.on('scroll', function() { .... });
But, to revoke that event handler, we can't just use
$window.off('scroll');
because there are likely other scroll event handlers on this very common target, and I'm not interested in hosing that other functionality (known or unknown) by turning off all of the scroll handlers.
My solution was to first abstract the handler functionality into a named function, and use that in the event listener setup.
function handleScrollingForXYZ() { ...... }
$window.on('scroll', handleScrollingForXYZ);
And then, conditionally, when we need to revoke that, I did this:
$window.off('scroll', $window, handleScrollingForXYZ);
The janky part is the 2nd parameter, which is redundantly selecting the original selector. But, the jquery documentation for .off() only provides one method signature for specifying the handler to remove, which requires this middle parameter to be
A selector which should match the one originally passed to .on() when attaching event handlers.
I haven't ventured to test it out with a null or '' as the 2nd parameter, but perhaps the redundant $window isn't necessary.
I wanna learn how to define a custom event, but not exactly as it is said over the net! let me illustrate:
In the jQuery Website in the part Introducing Custom Events it teaches you how to create a custom event in your code:
e.g.
$(document).on('myEvent',function(){
alert('Hello World');
});
then on an event, you'll call:
$(document).trigger('myEvent');
Well, no problem until here. to go further I have to give you another example:
The Question:
let's say we've defined:
$.fn.myEvent=function(callback){
$(document).bind('contextmenu',this,callback);
};
so we can use it as:
$(document).myEvent(function(){
alert('Hello World');
});
my question here is, how can we define "myEvent" so that we can use it as:
$(document).on('myEvent',function(){
alert('Hello World');
});
with the functionality of the $(document).myEvent(); so that we can pass a callback function to it without needing to actually trigger the event?
More Explanation:
for example, when we call $(document).on('click'); we don't actually need to trigger the click event elsewhere like $(document).trigger('click') in order to get it to work, so whenever click happens the function fires. I wanna have an event listener for "myEvent" so that when the conditions are matched, the function fires.
In another word (as mentioned below in the comments), I wanna know if there's a way to let jQuery treat "myEvent" as if it is one of the default events (click, mousemove, submit, etc).
Any answer or idea is highly appreciated.
I wanna have an event listener for "myEvent" so that when the conditions are matched, the function fires.
How would the engine know what "conditions" you mean? No, "custom events" are called custom because they are not natively trigged (through some lower-level action), but by custom code.
You may trigger a custom event whenever you see the condition matched that you're looking for.
About the definition of $.fn.myEvent, you might want to have a look at how the shortcuts for native events are created (where name would be "myEvent").
You're lumping together two different points:
how events work on general, and
how a browser environment dispatches events related to user action.
For the first point, I'll quote from another answer of mine:
In JavaScript, a custom event is simply a message, broadcast to all event listeners, that says, "Attention everyone: event X just happened!" Any listener that cares about that event can then run some function.
That's how events work in JavaScript. You set up listeners, and later something triggers the event. The trigger acts as a message to the listeners, telling them to run.
I've just said something triggers an event: we'll call that thing the initiator of the event. With custom events, the initiator is always other JavaScript code that you write (or that comes from a library, etc.). However, with native events the initiator is the browser itself. There is no way for JavaScript to control how the browser chooses to dispatch events.
The best you can do is listen for native browser events and then have those listeners dispatch custom events themselves.
For people who are wondering (like I did in the last 2 years) you can create a custom event (using pure javascript) as explained below:
var myEvent = new Event('myEvent');
and then you can use it like this:
document.querySelector('button').addEventListener(myEvent, function () {});
Simple Usage Example DEMO
Let's say we have a variable called bgColor and we want to change background color of 5 buttons, color of a paragraph and border color of an input anytime the bgColor value changes AND we don't want to use an interval to check on the value change and we also don't want to repeat the same code over and over again anytime the variable changes.
First we need to define our variables:
var bgColor='red',
eventName = 'bgColorChanged';
Then we need to listen for the event:
function Listen(elems,eventName,callback){
var event=new Event(eventName); //create the custom event
for(var i=0, elemsLength=elems.length; i < elemsLength; i++){ //iterate over the selected elements
elems[i].addEventListener(event,callback); //add event listener for our custom event
elems[i][eventName]=event; //store the event
//store the element
if(window.affectedElems){
window.affectedElems.push(elems[i])
}
else{
window.affectedElems=[];
window.affectedElems.push(elems[i])
}
//----------------------------
}
}
Now we can listen for our custom event like this:
Listen(document.querySelectorAll('button'),eventName,function(){
this.style.backgroundColor=bgColor;
});
Then we need a function to Dispatch/Fire our Event:
function dispatchEvent(eventName) {
var event=document.createEvent("HTMLEvents"), //defining the type of the event
elems=window.affectedElems; //getting the stored elements
//iterating over each element and dispatching the stored event
for(var i=0, elemsLength=elems.length; i < elemsLength; i++){
event.initEvent(elems[i][eventName], true, true);
event.eventName = eventName;
elems[i].dispatchEvent(event);
}
//-----------------------------------
}
Now we can fire our event like this:
dispatchEvent(eventName);
Now that everything's ready we just need to change the value of bgColor and just fire the event and let our system do the work.
bgColor='blue';
dispatchEvent(eventName);
I am trying to use Javascript to emulate the CSS :target pseudo-class so as to capture all events that result in an element on page being targeted. I've identified 3 trigger events:
window.location.hash already targets an element of the same ID on initialisation
An anchor targeting the element is clicked
The hashchange event is fired independently of the above (for example via the window.history API)
Scenario 2 is important as a distinct case since I would want to invoke the click event's preventDefault. The simplified code for this scenario follows:
$('body').on('click', 'a[href*=#]', function filterTarget(clickEvent){
$(this.hash).trigger('target', [clickEvent]);
});
The problem comes when trying to implement scenario 3:
$(window).on('hashchange', function filterTarget(hashChangeEvent){
$(this.hash).trigger('target', [hashChangeEvent]);
});
If a target handler doesn't cancel the native behaviour for scenario 2, it will be triggered again when the native behaviour causes the resulting hashchange event. How can I filter out these edge cases?
POST-SOLUTION EDIT:
roasted's answer held the key — handle a namespaced hashchange event, then unbind and rebind the handler based on logic handled inside the click handler and its preventDefault. I wrote up the full plugin here.
If i understand it, you don't want the hashchange event to be fired if an anchor tag is clicked. You could then set your logic using namespaced events:
DEMO
$('body').on('click', 'a[href*=#]', function (clickEvent) {
filterTarget(clickEvent,this);
$(window).off('hashchange.filter').on('hashchange.tmp', function () {
$(this).off('hashchange.tmp').on('hashchange.filter', filterTarget);
});
});
$(window).on('hashchange.filter', filterTarget);
function filterTarget(event,elem) {
$(elem?elem.hash:window.location.hash).trigger('target', [event]);
//you could filter depending event.type
alert(event.type + '::'+ (elem?elem.hash:window.location.hash));
}
if the click is setting the hash with the fragment anyway, just throw away duplicates in the hash change event:
onhashchange=function(e){
if(e.newURL == e.oldURL ){return; }
//do your normal hashchange event stuff below:
};
ref: https://developer.mozilla.org/en-US/docs/Web/API/window.onhashchange
this fixes cascade issues no matter what invoked the change.
Seems like you could use mousedown instead of click, if you're going to be calling preventDefault on it. Then presumably the hashchange would not be triggered.
What all events can be triggered programmatically using jQuery? Also is there any important differences to be remembered when one is doing event triggering using jQuery Vs a natural way of it being triggered?
Every event can be programmatically fired, just use the callback-less version of it.
Example:
$('#button').click(function() { alert('event hanlder'); });
$('#button').click(); // generate the event
About your second question, there should be no difference between the native and jQuery event handlers.
One thing that is neat though is that jQuery binds this to the element that received the event, inside the callback (this doesn't happen in native event handlers):
$('#button').click(function() { alert(this); }); // here 'this' == document.getElementById('button');
Warning: the element referenced by this is not "jQuery augmented". If you want to traverse or modify it with jQuery goodness you'll have to do something like var $this = $(this);
You should know the differences between trigger and triggerHandler in jQuery.
trigger
trigger attempts to replicate the natural event as best as it can. The event handler for the event being triggered get's executed, but the default browser actions will not always be replicated exactly. For example $('a#link).trigger('click'); will execute the javascript function bound to the links click event handler, but will not redirect the browser to the href of the anchor, like a normal click would. EX: http://jsfiddle.net/AxFkD/
All the short forms of the trigger call behave exactly like trigger IE. click(), mouseup(), keydown(), etc
triggerHandler
triggerHandler prevents bubbling up ( EX. http://jsfiddle.net/LmqsS/ ), it avoids default browser behaviour and just executes the events callback, and it returns the return value of the event handler instead of a jQUery object for chaining.
You should also be aware that trigger affects all elements matched by a selector, but triggerHandler only affects the first one EX: http://jsfiddle.net/jvnyS/
You can trigger any event programmatically. But most of the events cannot be simulated as the natural event using programmatic triggers.
//to trigger a click event on a button
$("buttonSelector").trigger("click");
First, for obvious reasons, you cannot trigger the ready event.
That said, events raised by trigger() behave the same way as if they were triggered by the user. In particular, the event handlers are called in the same order.
The only difference I know of is that triggered events did not bubble up the DOM tree in older versions of jQuery (that behavior was fixed in version 1.3).
I have a site that uses AJAX to navigate. I have two pages that I use a click and drag feature using:
$(".myDragArea").mousedown(function(){
do stuff...
mouseDrag = true; // mouseDrag is global.
});
$("body").mousemove(function(){
if (mouseDrag) {
do stuff...
}
});
$("body").mouseup(function(){
if (mouseDrag) {
do stuff...
mouseDrag = false;
}
});
I just type that out, so excuse any incidental syntax errors. Two parts of the site use almost identical code, with the only difference being what is inside the $("body").mouseup() function. However, if I access the first part, then navigate to the second part, the code that runs on mouseup doesn't change. I have stepped through the code with Firebug, and no errors or thrown when $("body").mouseup() is run when the second part loads.
So, why doesn't the event handler change when I run $("body").mouseup() the second time?
Using $("body").mouseup( ... ) will add an event handler for the body that is triggered at mouseup.
If you want to add another event handler that would conflict with current event handler(s) then you must first remove the current conflicting event handler(s).
You have 4 options to do this with .unbind(). I'll list them from the least precise to the most precise options:
Nuclear option - Remove all event handlers from the body
$("body").unbind();
This is pretty crude. Let's try to improve.
The elephant gun - Remove all mouseup event handlers from the body
$("body").unbind('mouseup');
This is a little better, but we can still be more precise.
The surgeon's scalpel - Remove one specific event handler from the body
$("body").unbind('mouseup', myMouseUpV1);
Of course for this version you must set a variable to your event handler. In your case this would look something like:
myMouseUpV1 = function(){
if (mouseDrag) {
do stuff...
mouseDrag = false;
}
}
$("body").mouseup(myMouseUpV1);
$("body").unbind('mouseup', myMouseUpV1);
$("body").mouseup(myMouseUpV2); // where you've defined V2 somewhere
Scalpel with anesthesia (ok, the analogy's wearing thin) - You can create namespaces for the event handlers you bind and unbind. You can use this technique to bind and unbind either anonymous functions or references to functions. For namespaces, you have to use the .bind() method directly instead of one of the shortcuts ( like .mouseover() ).
To create a namespace:
$("body").bind('mouseup.mySpace', function() { ... });
or
$("body").bind('mouseup.mySpace', myHandler);
Then to unbind either of the previous examples, you would use:
$("body").unbind('mouseup.mySpace');
You can unbind multiple namespaced handlers at once by chaining them:
$("body").unbind('mouseup.mySpace1.mySpace2.yourSpace');
Finally, you can unbind all event handlers in a namespace irrespective of the event type!
$("body").unbind('.mySpace')
You cannot do this with a simple reference to a handler. $("body").unbind(myHandler) will not work, since with a simple reference to a handler you must specify the event type ( $("body").unbind('mouseup', myHandler) )!
PS: You can also unbind an event from within itself using .unbind(event). This could be useful if you want to trigger an event handler only a limited number of times.
var timesClicked = 0;
$('input').bind('click', function(event) {
alert('Moar Cheezburgerz!');
timesClicked++;
if (timesClicked >= 2) {
$('input').unbind(event);
$('input').val("NO MOAR!");
}
});
Calling $("body").mouseup(function) will add an event handler.
You need to remove the existing handler by writing $("body").unbind('mouseup');.
jQUery doesn't "replace" event handlers when you wire up handlers.
If you're using Ajax to navigate, and not refreshing the overall DOM (i.e. not creating an entirely new body element on each request), then executing a new line like:
$("body").mouseup(function(){
is just going to add an additional handler. Your first handler will still exist.
You'll need to specifically remove any handlers by calling
$("body").unbind("mouseUp");