I am trying to get a larger amount of data. Sample data is below
1850/01 -0.845 -0.922 -0.748 -1.038 -0.652 -1.379 -0.311 -1.053 -0.636 -1.418 -0.272
1850/02 -0.043 -0.113 0.047 -0.244 0.159 -0.613 0.528 -0.260 0.177 -0.653 0.569
1850/03 -0.698 -0.794 -0.633 -0.891 -0.506 -1.123 -0.274 -0.910 -0.495 -1.174 -0.229
……….
2016/12 0.795 0.746 0.828 0.756 0.834 0.586 1.005 0.731 0.848 0.575 1.010
2017/01 1.025 0.977 1.067 0.983 1.068 0.786 1.265 0.963 1.084 0.778 1.271
2017/02 1.151 1.098 1.198 1.112 1.191 0.957 1.346 1.089 1.208 0.946 1.352
which starts from 1850 until 2017 and every month. I am processing this dataset to use it in Highcharts like this
$.each(lines, function(index, row) {
var cells = row.split(','),
series = {
type: 'line',
data:[]
};
$.each(cells, function(itemNo, item) {
if (itemNo == 0) {
series.name = item;
} else {
series.data.push(parseFloat(item));
}
});
data.push(series);
});
And I use it in following way
chart = $('#container').highcharts({
chart: {
polar: true
},
series: data
});
This does work however, it is really really slow. How can I improve/enhance its performance so that I the highcharts gets loaded quickly without freezing the browser?
UPDATE
Here is my xAxis
xAxis: {
tickInterval: 1,
min: 0,
max: 12,
categories: ['Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun', 'Jul', 'Aug', 'Sep', 'Oct', 'Nov', 'Dec'],
},
UPDATE 2
yAxis: {
min: -1,
max: 2.2,
endOnTick: false,
title: {
text: 'Temperature (°C)'
},
plotLines: [{
value: 2,
width: 1,
label: {
text: '2°C',
align: 'right',
y: 2
},
color: 'red'
}, {
value: 1.5,
width: 1,
label: {
text: '1.5°C',
align: 'right',
y: 30
},
color: 'red'
}],
},
I think this problem will require a combination of the solutions proposed by others. These include:
Condensing the data: If I understand correctly, then you have 167 years of data and 12 months per year. Each of these will be a series, for a total of >2000 series. I'm not sure this will create an interpretable graph, but it's also likely I misunderstand the nature of your data and how you plan to plot it.
Using the boost.js module of Highcharts: Highcharts normally renders its graphs as SVGs. My understanding of the boost.js module is that it causes some parts of the charts to be rendered on HTML5 canvas elements. The HTML5 canvas is much faster than SVG for large numbers of data points. See an empirical comparison here: SVG vs canvas: how to choose
Setting chart options to minimize resource requirements: I believe that the slowdown you're experiencing is unlikely to be due to the processing of your data. Rather, I think it's almost certainly due primarily to the rendering time required by Highcharts, and browser resources required to monitor events on all of the chart elements. By default, for instance, Highcharts plots allow you to "hover" your mouse over data points to highlight them, and they display tooltips with information about the data point. If you have a plot with thousands of data points, then this requires your browser to handle thousands of mouse events over the chart objects. Turning off this chart features should improve performance. In the demo below, I've turned off tooltips and data point highlighting using the mouse. I've also turned off the legend, to improve visibility of the chart.
You can process and update the data in chunks: In the long run, this will actually take more time than if you were to render the chunk all in one go, because Highcharts has to redraw the chart each time you add a new series. However, it might lead to a better user experience, since the page will appear more responsive. The demo below utilizes this type of approach. It allows you to set the number of lines of data to process per chunk (linesPerChunk) and the time delay between one chunk finishes processing and when you want to begin processing the next chunk (timeBetweenChunks). Ideally, timeBetweenChunks would be set to the time it takes Highcharts to render and display the last chunk, so that the computer alternates between processing data and rendering data, with no unproductive gaps in between. Ideally one could set this adaptively so that it's optimal across computers/users/browsers/etc., but I'm not sure how to do this; any ideas would be welcome. So for the moment it's just set to a constant 100 ms. With 2000 lines of data, 100 lines per chunk of data, and 100 ms between chunks, the whole thing should take ~2 s to load. The key function is plotMoreData(). After processing a chunk and adding the new series to the chart, it calls itself with a delay of timeBetweenChunks using window.setTimeout(plotMoreData, timeBetweenChunks). It then redraws the chart. When plotMoreData gets called the next time, it processes the next chunk, and so on. It stops when it's processed and displayed all the data and also updates the status message.
EDIT:
It seems the Highcharts boost module does not work with polar charts, and this is a known issue. A fix is described here: Polar Scatter Using Boost Module. I was able to get this fix to work by modifying boost.src.js (built from the Highcharts Github repository as follows:
At ~line 1380, I replaced:
if (!settings.useGPUTranslations) {
inst.skipTranslation = true;
x = xAxis.toPixels(x, true);
y = yAxis.toPixels(y, true);
}
with:
if (!settings.useGPUTranslations) {
inst.skipTranslation = true;
// Default (non-Polar) calculation
if( !series.chart.polar ) {
x = xAxis.toPixels(x, true);
y = yAxis.toPixels(y, true);
}
// Handle Polar chart coordinate conversion
else {
var polarPoint = {
plotX: xAxis.translate( x, 0, 0, 0, 1, series.options.pointPlacement, series.type === 'flags' ),
plotY: yAxis.translate( y, 0, 1, 0, 1 )
};
series.toXY( polarPoint );
x = Math.round( polarPoint.plotX );
y = Math.round( polarPoint.plotY );
}
}
This seemed to work. See the demo here: JSFiddle Polar Highcharts Boost Demo
Given the data you are displaying is not updating once a month, I feel like generating the chart for every view is a big waste of resources for your clients.
Indeed, it would be pretty easy for you to generate the chart without changing anything that you are doing now, but then extracting the resulting SVG and serving it simply to your visitors.
For that you simply have to use the getSVG method of HighCharts, that will return the SVG in a stringified form.
I don't really know if you want to have some sort of process to auto update the chart, but you could use a cron job for this purpose. Keep in mind that you would have to do something anyway even with your initial approach to update the data.
Regarding your script, first thing to notice is that you are using $.each, which is pretty bad in term of performance comparing to the vanilla equivalents. As demonstrated by this jsPerf, I get 3,649 Op/s with $.each whereas for loops could get you up to 202,755 Op/s which is insanely faster! Since you also doing a double loop, the difference would be ^2.
But again, since the data is not updated often, this part of the script could be removed entirely and converted into a JSON corresponding to the output of the function, that HighCharts could load directly, skipping the entire processing and transformation of your CSV.
If using HighCharts is not a requirement, you could use react-vis, which is a collection of React components focused around Data Visualization. It's build as an api on top of SVG, .
I've made a demo that you can checkout on CodePen with the same data as you to plot the monthly temperatures since 1850.
const {
HorizontalGridLines,
XAxis,
XYPlot,
YAxis,
LineMarkSeries,
} = reactVis
const color = d3.scaleLinear()
.domain([1850, 2017])
.range(['yellow', 'red'])
const Chart = () => (
<XYPlot width={window.innerWidth - 100} height={window.innerHeight - 100}>
<XAxis title='Month' />
<YAxis title='Temperature' />
<HorizontalGridLines />
{Object.keys(data).map(key => (
<LineMarkSeries color={color(key)} data={data[key]} key={key} />
))}
</XYPlot>
)
ReactDOM.render(<Chart />, document.querySelector('#root'))
I also use the scaleLinear method of d3 to see the change over the years since I thought it would be an interesting information to show, but it can be changed depending of your needs.
It's using SVGs, but we are also working on integration with webgl by the intermediary of deck.gl which would allow for even more optimizations gains, still not ready yet and I'm not sure you would really need that much, but worth noting.
Disclaimer: I currently work for Uber, which made deck.gl and react-vis.
new Array(length)
Specify the array's length rather than creating an empty array. Writing to an existing offset in an array is substantially faster than creating a new offset each time you write an item.
var data = new Array(lines.length); // Specify array length
$.each(lines, function(index, row) {
var cells = row.split(','),
series = {
type: 'line',
data: new Array(cells.length) // Specify array length
};
$.each(cells, function(itemNo, item) {
if (itemNo == 0) {
series.name = item;
} else {
series.data.push(parseFloat(item));
}
});
data.push(series);
});
I'd use underscore.js.
var result = _.map(lines, function (row) {
return { type: 'line', series: _.map(row.data, function (item, index) {
if (index >= 1)
return parseFloat(item);
}), name: row.data[0]}
});
(I'm writing this from my phone on a plane, so my apologies if there is are any typos or things I'm missing. Just trying to help!)
You don't show what is your choice for the xAxis, but if massaging the data in the server side is not an option what I would suggest is:
First do a call to load the data.
Show at spinning wheel where the chart is going to be displayed
Start parsing the dataset but don't load it all at once but in batches and redraw the chart as you parse the rest of the file.
This should avoid the freezing and give the visual indication that the data is being loaded.
Edit: Response to comment
I don't think is any longer an issue loading the data but on how to display the data in a meaningful way. Even if it loads in 2 seconds the result would be thousands of lines overlapping and totally unreadable.
You should default few hand picked values (ex Current month and same month and 1, 5, 10 years ago) and then allow the user to change the selection select up to a reasonable number of years/month (ex Compare July for 1980, 2010 and 2017) then plot those values updating the chart with (chart.series[0].update(....).
There were no columns in the dataset so I assumed it was a column per month but I see now that they seem to be one per row and 11 columns represent some other data.
I don't think for a polar chart doing averages or doing rollups of the data is the best way to go but allowing to compare specific years and month with the exact data, whatever those values are :)
Situation:
I think the best and more appropriate solution would be to process and serve chunks of data, it would synchronize the display of points on your Chart and avoid loading the whole data once on document load, even if your data isn't as large as you described it in your post title.
But after reading your question, your comments and other posts, I can see that you are getting all data from one file, and you aren't processing data on server side so server side chunks is not an option for you.
Alternative:
Well if you can't process your data on server side why don't you process it on client side, HighCharts has two options for you:
Data grouping:
You can follow Highstock Demos › 52,000 points with data grouping.
Lazy Async loading:
You can follow Highstock Demos › 1.7 million points with async loading.
The both Demos show how to fetch data by ranges and limit the chart to display only relevant range data points, which will improve time loading performances.
my team came across the similar problem but in our case we had 3 nested loops and when it was processing the data it was blocking the main thread which caused bad user experience. so i tackled this problem by deferring the processing data. which did the desired job of not blocking the main thread and did the processing much faster.
you can also use boost module developed by highchart (https://www.highcharts.com/blog/news/175-highcharts-performance-boost/)
I have a (Highcharts) graph with a percentage over time. The input for my series looks something like:
series: [{
name: "Percentage",
data: [
[1472515200000, 49],
[1472601600000, 48.83],
[1472688000000, 49.6],
[1472774400000, 48.77]
]
}]
However on the actual chart (areaspline) I get different values:
30 Aug, 48.91
31 Aug, 49.36
1 Sep, 49.6
2 Sep, 48.87
Not entirely sure why this is the case, I'm assuming it's because the graph has a datetime type and it's figuring out the average over time. Is there a way I can make the values exact as they are input? Couldn't find anything in docs
Thanks for any ideas/help/advice.
Upon further research, it seems like it's not so much a Highcharts problem but a React one. I seem to be getting different values on each render. Will look into this further and update for the curious.
Problem seemed to be related to React re-rendering and therefore recalculating my percentage values - not a Highcharts issue. Thanks for everyone who commented, bit of a wild goose chase.
Jamie, to make the input values be taken literally, you need to either leave the type value of your x-axis unset or change it to type: 'literal'.
Here's a basic fiddle I created with your data to show how it can be interpreted exactly as input (vs. converted to dates): http://jsfiddle.net/brightmatrix/vtLswcex/1/
$(function () {
Highcharts.setOptions({
lang: {
thousandsSep: ',' // adds comma for axis labels
}
});
Highcharts.chart('container', {
xAxis: {
labels: {
formatter: function() {
return Highcharts.numberFormat(this.value,0);
}
}
},
series: [{
name: "Percentage",
data: [
[1472515200000, 49],
[1472601600000, 48.83],
[1472688000000, 49.6],
[1472774400000, 48.77]
]
}]
});
});
Note that I've added formatting for the x-axis labels, as well as a thousands separator in the Highcharts.setOptions() function, so that your labels will be more easily readable as trillions.
Does this help answer your question? If you are instead looking for a better way to format time-specific data, the comment by #morganfree is well worth looking into.
I've been trying to add some custom yAxis labels to highcharts but I've not been able to so far. I've tried using formatter from a predefined array of strings and I've tried addAxis method but that doesn't get me the results I'm looking for.
Basically I have some numbers (lets say 4 and 4000) and I want to have these as my yLabels. However, I do NOT want the giant space between them. They need to be one right after the other and in ascending order. I cannot figure out how to do this leaving them as integers and I cannot figure out how to dynamically add them to highcharts as strings. I'm not even sure if this is possible
Any help would be greatly appreciated.
Here is the Y-axis label formatter documentation from Highcharts you're probably looking for. I wrote this fiddle to simulate the custom y-axis functionality you were wanting, although I'm not sure how you want to map those values to the x-axis data. This should give you a good starting point.
Code for reference:
$('#container').highcharts({
yAxis: {
categories: ['4', '4000', 'Foobar'],
labels: {
formatter: function () {
return this.value;
}
}
},
series: [{
data: [0, 1, 2]
}]
});
This stackoverflow question may also help although I noticed some dead links.
Using the Highstock (Highcharts) library,
I'm wondering, how do I combine A) adding flags as in here (or see fig.1) with B) dynamically updating data, using the addPoint function (ex: series.addPoint([x, y], true, true) see here). There doesn't seem to be a facility for it in the addPoint function.
series : [{
name : 'USD to EUR',
data : data,
id : 'dataseries'
},
{
type : 'flags',
data : [{
x : Date.UTC(2011, 3, 25),
title : 'H',
text : 'Euro Contained by Channel Resistance'
}],
onSeries : 'dataseries',
shape : 'circlepin',
width : 16
}]
fig.1
I have taken a look at this SO question. But is seems to add a flag on an existing dataset. Can I add a data point, and an associated flag at the same time?
Any help's appreciated.
Thanks
=== EDIT ===>
#Sebastian-Bochan
Thanks for responding, and for the working example. However, for some reason, addPoint is not working for my setup.
So take a look at this jsfiddle. What I do is i) setup an initial graph with a call to (chart-fill …), then ii) call (chart-increment …) which adds 1 point, then immediately tries to add 1 flag on that point. The part that isn't working is (-> ($ selector) (.highcharts) (.-series) (nth 9) (.addPoint { :x 1234567 :title "fubar"} true false)). This isn't adding the flag as I'd expect.
I have 11 Series overlaid on top of 5 graphs. This includes one series of type "flag". I thought, maybe with so many Series, there was a problem referencing one of them. But if I look into my series, I can see that the flag is indeed the 9th one.
I'm also using Clojurescript code. But I don't think that's an issue, as the graph otherwise renders properly. Any ideas?
Please take look at example: http://jsfiddle.net/pGpU7/2/
chart.series[0].addPoint([Date.UTC(2012, 1, 5),2],false);
chart.series[1].addPoint({
x: Date.UTC(2012, 1, 3),
title: 'On series'
},true);
I have several lines and I know that clicking on the "dot" in the legend will hide/show it.
However, I need to start with some of the lines being disabled and not displayed, and the user will have to click on the dot in the legend to show it on the graph.
(eg. I graph the number of questions on stackoverflow per language, but with C, PHP and javascript disabled by default). the graph only shows python, ruby... but on the legend, you have all the languages, including C, PHP and js with these 3 being disabled.
I haven't found a method/attribute for each data serie to set the default show/hide status. Am I missing something?
After reading this answer I still had to do some more reading in order for me to understand how to set a stream disabled from my JSON data-stream for the graphs.
The example below is what solved it for me disabled: true
{
key: "something",
disabled: true,
values: [...]
}
You can change which streams are enabled/disabled by using the chart.state() object. For example:
// Assuming your chart is called 'chart'
var state = chart.state();
for(var i=0; i < state.disabled.length; i++) {
state.disabled[i] = ...LOGIC RETURNING TRUE OR FALSE...;
}
chart.dispatch.changeState(state);
chart.update();
For each of your data series that you want disabled, just do:
series.disabled=true
nvd3 does not do everything, but if you are willing to peruse the code it is actually quite flexible. I discovered this by finding this line in the source of several of the chart models:
state.disabled = data.map(function(d) { return !!d.disabled });
You could start out with a hidden chart and try something like this:
// Array of series you want to hide
var hidden = [0, 2];
// Dispatch click event to each element
var e = document.createEvent('UIEvents');
e.initUIEvent('click', true, true);
d3.select('.nv-legend')
.selectAll('.nv-series')
.filter(function(d, i){return hidden.indexOf(i) !== -1;})
.node()
.dispatchEvent(e);
Once this finishes, unhide your chart and the series will be disabled.