I'm using jQuery's click function to check the formatting of highlighted text, however the function isn't always called.
If you highlight part of a line it will work as expected, however if you highlight the entire line it simple doesn't call at all.
Here is a JSFiddle for you to try it out: http://jsfiddle.net/ZMYRH/
Is there any chance I'm using this function incorrectly? Or is there a workaround to what I want to achieve?
The issue is because a click event is only fired if the mousedown and mouseup event occur on the same element.
In your case the mouseup event would be more appropriate as it will allow the user to drag a selection across elements.
Updated fiddle
Related
I’m running into this issue where a single action by the user is supposed to trigger two events but it only triggers the first one.
The scenario:
A user enters some text into a special field that modifies the layout on focusout , after entering the text, without leaving the field, they click a button.
What’s happening?
I have a focusout event on a text box and click event on a button. What I see is the focusout event gets fired but the click event never does.
I’ve encapsulated this in a jsfiddle:
http://jsfiddle.net/fCz6X/13/
$('#theText').focusout(function (){
$("#focusevent").text("Focusevent");
console.log("focus");
});
$('#theButton').click(function (){
$("#clickevent").text("Clickevent");
console.log("click");
});
So if you click in the text field then click the button I’d expect both events to fire, but we only see the focus out event.
I put in a temporary fix for this by having the mousedown event fire the button instead of a click event (this fires before the focusout event) but that is causing some other behaviors and issues that I don’t want to see. Due to those I think optimal solution is finding a way to get the focusout and click events to both fire. Does anyone have thoughts on how to fix this problem?
Edit: After seeing initial responses I dug a little deeper, the issue here is that the focusout event is changing the page layout which very slightly pushes the location of the button down. The click event triggers after the focusout is done but since the button is no longer in the exact same location, nothing happens.
Here is an updated fiddle that shows my problem
http://jsfiddle.net/fCz6X/11/
It's because you're calling alert - the focusout event fires, but before the browser recognizes you've clicked the button, the alert box blocks it.
Change your event handler to console.log or something else that's non-obtrusive and you'll be ok.
It is the Alert that is blocking.
Some browser security prevents firing too many window.alert at the time.
When trying with other triggers, it looks. You may try console.log()
$('#theText').on("focusout",function (){
$("#theText").val($("#theText").val()+"flb");
});
$('#theButton').on("click",function (){
$("#theText").val($("#theText").val()+"but");
});
I believe this is because the focusout event fires first, executing the handler, and the alert then prevents the browser from recognizing the click.
Try again with console.log instead of alert - it's less invasive.
As Joe said, the blocking alert call is what is breaking the event. Using a non-blocking call you will see both events.
If you really need to perform an alert like this, though, you can defer calling 'alert' until later using setTimeout()
$('#theText').focusout(function (){
setTimeout(function() { // alert after all events have resolved
alert("focus left text box");
}, 0);
});
Edit: In your updated fiddle the reason the click event never fires is because no click event occurs. If you move the button out from under the mouse on mousedown, there is no followup mouseup which is what initiates the 'click' event.
You may need to reconsider other aspects of your design. Your solution of using 'mousedown' is the best you can achieve because it's the only event that actually occurs.
It appears that the Blur event stops the click event handler from working? I have a combo box where the options only appear when the text field has focus. Choosing an option link should cause an event to occur.
I have a fiddle example here: http://jsfiddle.net/uXq5p/6/
To reproduce:
Select the text box
Links appear
Click a link
The blur even occurs and the links disappear
Nothing else happens.
Expected behavior:
On step 5, after blur occurs, the click even should also then fire. How do I make that happen?
UPDATE:
After playing with this for a while, it seems that someone has gone to great lengths to prevent an already-occurred click event from being handled if a blur event makes the clicked element Un-clickable.
For example:
$('#ShippingGroupListWrapper').css('left','-20px');
works just fine, but
$('#ShippingGroupListWrapper').css('left','-2000px');
prevents the click event.
This appears to be a bug in Firefox, since making an element un-clickable should prevent future clicks, but not cancel ones that have already occurred when it could be clicked.
Other things that prevent the click event from processing:
$('#ShippingGroupListWrapper').css('z-index','-20');
$('#ShippingGroupListWrapper').css('display','none');
$('#ShippingGroupListWrapper').css('visibility','hidden');
$('#ShippingGroupListWrapper').css('opacity','.5');
I've found a few other questions on this site that are having similar problems. There seem to be two solutions floating around:
Use a delay. This is bad because it creates a race condition between the hiding and the click event handler. Its also sloppy.
Use the mousedown event. But this isn't a great solution either since click is the correct event for a link. The behavior of mousedown is counter-intuitive from a UX perspective, particularly since you can't cancel the click by moving the mouse off the element before releasing the button.
I can think of a few more.
3.Use mouseover and mouseout on the link to enable/disable the blur event for the field. This doesn't work with keyboard tabing since the mouse is not involved.
4.The best solution would be something like:
$('#ShippingGroup').blur(function()
{
if($(document.activeElement) == $('.ShippingGroupLinkList'))
return; // The element that now has focus is a link, do nothing
$('#ShippingGroupListWrapper').css('display','none'); // hide it.
}
Unfortunately, $(document.activeElement) seems to always return the body element, not the one that was clicked. But maybe if there was a reliable way to know either 1. which element now has focus or two, which element caused the blur (not which element is blurring) from within the blur handler. Also, is there any other event (besides mousedown) that fires before blur?
click event triggers after the blur so the link gets hidden. Instead of click use mousedown it will work.
$('.ShippingGroupLinkList').live("mousedown", function(e) {
alert('You wont see me if your cursor was in the text box');
});
Other alternative is to have some delay before you hide the links on blur event. Its upto you which approach to go for.
Demo
You could try the mousedown event instead of click.
$('.ShippingGroupLinkList').live("mousedown", function(e) {
alert('You wont see me if your cursor was in the text box');
});
This is clearly not the best solution as a mousedown event is not achieved the same way for the user than a click event. Unfortunately, the blur event will cancel out mouseup events as well.
Performing an action that should happen on a click on a mousedown is bad UX. Instead, what's a click effectively made up of? A mousedown and a mouseup.
Therefore, stop the propagation of the mousedown event in the mousedown handler, and perform the action in the mouseup handler.
An example in ReactJS:
<a onMouseDown={e => e.preventDefault()}
onMouseUp={() => alert("CLICK")}>
Click me!
</a>
4.The best solution would be something like:
$('#ShippingGroup').blur(function()
{
if($(document.activeElement) == $('.ShippingGroupLinkList'))
return; // The element that now has focus is a link, do nothing
$('#ShippingGroupListWrapper').css('display','none'); // hide it.
}
Unfortunately, $(document.activeElement) seems to always return the
body element, not the one that was clicked. But maybe if there was a
reliable way to know either 1. which element now has focus or two,
which element caused the blur (not which element is blurring) from
within the blur handler.
What you may be looking for is e.relatedTarget. So when clicking the link, e.relatedTarget should get populated with the link element, so in your blur handler, you can choose not to hide the container if the element clicked is within the container (or compare it directly with the link):
$('#ShippingGroup').blur(function(e)
{
if(!e.relatedTarget || !e.currentTarget.contains(e.relatedTarget)) {
// Alt: (!e.relatedTarget || $(e.relatedTarget) == $('.ShippingGroupLinkList'))
$('#ShippingGroupListWrapper').css('display','none'); // hide it.
}
}
(relatedTarget may not be supported in older browsers for blur events, but it appears to work in latest Chrome, Firefox, and Safari)
If this.menuTarget.classList.add("hidden") is the blur behavior that hides the clickable menu, then I succeeded by waiting 100ms before invoking it.
setTimeout(() => {
this.menuTarget.classList.add()
}, 100)
This allowed the click event to be processed upon the menuTarget DOM before it was hidden.
I know this is a later reply, but I had this same issue, and a lot of these solutions didn't really work in my scenario. mousedown is not functional with forms, it can cause the enter key functionality to change on the submit button. Instead, you can set a variable _mouseclick true in the mousedown, check it in the blur, and preventDefault() if it's true. Then, in the mouseup set the variable false. I did not see issues with this, unless someone can think of any.
I have faced a similar issue while using jQuery blur, click handlers where I had an input name field and a Save button. Used blur event to populate name into a title placeholder. But when we click save immediately after typing the name, only the blur event gets fired and the save btn click event is disregarded.
The hack I used was to tap into the event object we get from blur event and check for event.relatedTarget.
PFB the code that worked for me:
$("#inputName").blur(function (event) {
title = event.target.value;
//since blur stops an immediate click event from firing - Firing click event here
if (event.relatedTarget ? event.relatedTarget.id == "btnSave" : false) {
saveBtn();
}
});
$("#btnSave").click(SaveBtn)
As already discussed in this thread - this is due to blur event blocking click event when fired simultaneously. So I have a click event registered for Save Btn calling a function which is also called when blur event's related Target is the Save button to compensate for the click event not firing.
Note: Didnt notice this issue while using native onclick and onblur handlers - tested in html.
i have 5 elements in a page.
i have selected them using class names $('.class')
i am trying to perform a function for those selected elements irrespective of event (click or hover or watever).
eg:
$('.class').hover(function(){definition1});
$('.class').click(function(){definition1});
i dont want to have 2 seperate event as above 2, instead i want the function to be executed irrespective of whether its hover or click event.
$('.class').bind('click mouseenter', function() {
// Go nuts.
});
(if using jQuery >= 1.7, swap bind() with on().)
Keep in mind that hover()'s second argument is for mouseleave event, which you haven't written anything for here.
If you want to cover most events, pass in 'blur focus focusin focusout load resize scroll unload click dblclick mousedown mouseup mousemove mouseover mouseout mouseenter mouseleave change select submit keydown keypress keyup error' as the first argument.
You could also try to detect them with code by iterating over properties that start with on, but it sounds too flaky to me.
To bind multiple events to one element in jQuery 1.7 and later you can do the following by separating event names by spaces:
jQuery('.class').on('click hover mousenter mouseleave', function(event){
// do what you need to do
});
which you can see in jsfiddle.
But: be careful, because you can easily fire the event too much times (more than necessary and more than enough). By binding so many events some may be called unnecessarily (as in the example above the code will be fired twice when the mouse cursor will leave the element it hovered over).
If you do not want to exec a function without any event put it in
$(function(){
function test(){definition1}
});
then in html
<body onload="test();">
I have a code like this
$('#singleColumn' + time).show(SHOW_COMPONENT_SPEED)
.live('mouseenter', function() { $('#propertiesButtonSingle' + time).fadeIn(FADEIN_SPEED); })
.live('mouseleave', function() { $('#propertiesButtonSingle' + time).fadeOut(FADEOUT_SPEED); });
which I'm using to show/hide a button when mouseenter/mouseleave events are fired on a box.
The problem is that my page is dynamic, i.e. I keep adding new HTML to the page using JQuery .html() function. What happes is that the mouse events are fired only for the last box I added (I add them by drag and dropping): pratically it works fine for the first box, if I add a second one the events are fired correctly for it but when I move the mouse over the first box nothing happens. If I add a third box the second one stops working too, etc...
The code I posted is for one kind of box, but for the other types it is pratically the same apart from the selector names.
take a look at .delegate() - http://api.jquery.com/delegate
you could bind events to an object higher up the DOM tree and listen ...
Assume I get a table element with ID="emTab", how do I call JS to click it?
Thanks.
document.getElementById("emTab").onclick = function() {
// your code goes here
};
See element.onclick
To trigger click event
document.getElementById("emTab").click();
See element.click
The click method is intended to be
used with INPUT elements of type
button, checkbox, radio, reset or
submit. Gecko does not implement the
click method on other elements that
might be expected to respond to
mouse–clicks such as links (A
elements), nor will it necessarily
fire the click event of other
elements.
Non–Gecko DOMs may behave differently.
When a click is used with elements
that support it (e.g. one of the INPUT
types listed above), it also fires the
element's click event which will
bubble up to elements higher up the
document tree (or event chain) and
fire their click events too. However,
bubbling of a click event will not
cause an A element to initiate
navigation as if a real mouse-click
had been received.
Cross browser way
If you can use jQuery then it would be
$("#emTab").trigger("click");
Firing events cross-browser - http://jehiah.cz/archive/firing-javascript-events-properly
its simple using JQuery
$('#emTab').click(functionToCall);
while in JS
document.getElementById('emTab').onclick = function() {};
for details on DOM events:
http://www.howtocreate.co.uk/tutorials/javascript/domevents