I have some divs that need to be hidden (class named .hideable), and some divs that need to be shown (class named .toggleable. I have it working so far, which is great, but I`m having difficulties with the following; The hidden divs (.hideable) need to come back after the toggleable divs are hidden again.
here is what I have:
jQuery(document).ready(function($) {
var topContainer = $(".toggleable");
var topButton = $(".orsp a");
topButton.click(function() {
topContainer.slideToggle('slow');
$(".hideable").hide();
});
});
all help is welcome!
thanks,
J.
Use jQuery.toggle()
$(".hideable").toggle();
instead of jQuery.hide()
I think you wnat try like this
HTML
<div style='display:none' class='hideable' >Hidden Div</div>
<div class='toggleable'>Toggleable div</div>
<input class='topButton' type='button' value='toggle'>
JS
$('.topButton').click(function() {
$('.toggleable').slideToggle('slow', function() { $(".hideable").slideToggle(); });
});
Fiddle Here
If you don't want to use toggle to hide the .hideable div you can hide it using CSS and whenever you toggle .toggleable div you can check with Jquery whether it is hidden and if it is you can change it back to be shown. However Jakub's answer is the simplest solution.
jQuery(document).ready(function($) {
var topContainer = $(".toggleable");
var topButton = $(".orsp a");
topButton.toggle(function() {
topContainer.slideToggle('slow');
$(".hideable").hide();
},function () {
topContainer.slideToggle('slow');
$(".toggleable").hide();
});
});
Simplest choose toggle or toggle class
Fiddle
<http://jsfiddle.net/gcsHg/>?
Related
I've seen a few articles about this dotted around but I cant seem to get their solutions to work for me.
What I have are two buttons which control the show() and hide() states of different div's. On page load both of the div's are set to .hide() as the user doesn't need to see them until clicked.
So, I have two buttons a and b which currently work perfectly however you can show() both div's at the same time which I don't want to happen. The current code resembles
$('#a-div).hide();
$('#b-div).hide();
$('#a').click(function(){
$('#a-div).toggle(500);
});
$('#b').click(function(){
$('#b-div).toggle(500);
});
So how can I re-write this so that if #a-div is visible (already tried the .is(':visible') method) and #b is clicked nothing happens until #a-div is hidden again and vis versa?
Try this
$('#a-div').hide();
$('#b-div').hide();
$('#a').click(function(){
$('#a-div').toggle(500);
if($('#b-div').is(":visible"))
$('#b-div').hide();
});
$('#b').click(function(){
$('#b-div').toggle(500);
if($('#a-div').is(":visible"))
$('#a-div').hide();
});
probably you need to apply concept like this
$('#a-div).hide();
$('#b-div).hide();
$('#a').click(function(){
if ($('#b').isVisible)[you can check via css property as well]
{
$('#b-div).toggle(500); [or set css property visiblity:hidden]
$('#a-div).toggle(500);
}
else {$('#a-div).toggle(500);}
});
$('#b').click(function(){
if ($('#a').isVisible)[you can check via css property as well]
{
$('#a-div).toggle(500); [or set css property visiblity:hidden]
$('#b-div).toggle(500);
}
else {$('#b-div).toggle(500);}
});
What I ended up doing is this
$('#a-div').hide();
$('#b-div').hide();
$('#a').click(function(){
$('#a-div').toggle();
$('#b-div').hide();
});
$('#b').click(function(){
$('#b-div').toggle();
$('#a-div').hide();
});
For anyone who is interested. Prior to this I was making this much more complex than it needed to be.
Another solution is to create a universal function and pass the parameters of the shown and hidden objects. This way you can use the same method for future elements:
function toggleDivs($show, $hide) {
$show.toggle();
$hide.hide();
}
$("#b").on("click", function() { toggleDivs($("#b-div"), $("#a-div")); });
$("#a").on("click", function() { toggleDivs($("#a-div"), $("#b-div")); });
The only item missing is to initially hide the div objects, but I would add a css class to the objects to hide them.
HTML
<button id="a">Show A</button>
<button id="b">Show B</button>
<div id="a-div" class="hideDiv">A</div>
<div id="b-div" class="hideDiv">B</div>
CSS
.hideDiv { display:none; }
var $aDiv = $('#a-div');
var $bDiv = $('#b-div');
var $aBtn = $('#a');
var $bBtn = $('#b');
$aDiv.hide();
$bDiv.hide();
$aBtn.click(function(){
$aDiv.toggle(500, function(){
if($aDiv.is(":visible"))
$bBtn.prop("disabled",true);
else
$bBtn.prop("disabled",false);
});
});
$bBtn.click(function(){
$bDiv.toggle(500, function(){
if($bDiv.is(":visible"))
$aBtn.prop("disabled",true);
else
$aBtn.prop("disabled",false);
});
});
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<div id="a-div">div a</div>
<div id="b-div">div b</div>
<button id="a">btn a</button>
<button id="b">btn b</button>
I have my menu like this:
https://jsfiddle.net/23r4q610/
And my code to change the selected menu button like below:
$('#bluebutton').click(function () {
$('.testul li').removeClass('selectedred selectedpurple selectedgreen selectedorange');
$('#bluebutton').addClass('selectedblue');
});
$('#redbutton').click(function () {
$('.testul li').removeClass('selectedblue selectedpurple selectedgreen selectedorange');
$('#redbutton').addClass('selectedred');
});
$('#purplebutton').click(function () {
$('.testul li').removeClass('selectedblue selectedred selectedgreen selectedorange');
$('#purplebutton').addClass('selectedpurple');
});
$('#greenbutton').click(function () {
$('.testul li').removeClass('selectedblue selectedred selectedpurple selectedorange');
$('#greenbutton').addClass('selectedgreen');
});
$('#orangebutton').click(function () {
$('.testul li').removeClass('selectedblue selectedred selectedpurple selectedgreen ');
$('#orangebutton').addClass('selectedorange');
});
Ofcourse this is bad code since it could be written much shorter. Should I go about this using just numbers so I can do some foreach, or is there a better way to do this?
This can be condensed by adding a generic click event on all buttons by using [id*="button"]. Then grab the relevant color from the nested anchor.
$('[id*="button"]').click(function(){
$('.testul li').removeClass();
$(this).addClass('selected'+$('a',this).attr('class'));
});
or
$('li').click.../*this would be the same as above*/
fiddle
In this particular case, there doesn't appear to be a good reason to add and remove classes. Just change the background color instead of adding and removing a class to do so.
$(this).css("background-color", "red");
I would avoid hard-coding the color names into the HTML IDs. Rather use a CSS class name like "selected" and describe in your CSS what that should look like. Example:
<li id="home-button" class="color-button">Home
CSS:
#home-button.selected,
#home-button:hover {
background: -webkit-linear-gradient(#78b1ff, #4881dc);
}
JS:
$('.color-button').click(function () {
$(this).toggleClass("selected").siblings(".color-button").removeClass("selected");
}
This way color information (presentation) is separated from semantic information (like "home") and JS code is daramtically shorter.
Note: this is just an advice, I have not tested it but should give you a good point to start.
You can reduce the code to only 1 click binding. Where when an element is clicked, class from all the li's is removed and then on the current clicked li, selected class is added.
$(".testul > li").click(function(){
$('.testul li').removeClass('selectedred selectedpurple selectedgreen selectedorange selectedblue');
var color = $(this).attr("id").replace("button","");
$('#'+color+'button').addClass('selected'+color);
});
Here is the updated fiddle - https://jsfiddle.net/23r4q610/2/
I am not a jquery specialist but I have managed to make this script working on my website:
<script>
$(document).ready(function() {
$('#open_#div_hidden_1').click(function() {
if ($('#div_hidden_1').is(':hidden')) {
$('#div_hidden_1').show(500);
$('#div_hidden_1').hide(500);
} else {
$('#div_hidden_1').hide(500);
}
});
});
</script>
Basicly it displays and collapses a div (distinguished by id), I have many divs on my wbesite that are displayed this way(its an inline code, for each div separate code) What I would like to do with it is to close all other divs (e.g. from the same class) when I open another one. Could please someone help me to modify this code so that it will collapse all other divs form the same class?
If you have multiple DIVs and class like below,
<div class="divClass">A</div>
<div class="divClass">B</div>
<div class="divClass">C</div>
then, you need to use like,
$(".divClass").click(function(){
$(".divClass").hide(500); //hiding all the element with divClass
$(this).show(500); // showing up the clicked element.
});
This might be able to you
Reference
Just a part of code
$(".header").click(function () {
$(".header").not(this).text('Expand').next().slideUp();
$header = $(this);
//getting the next element
$content = $header.next();
//open up the content needed - toggle the slide- if visible, slide up, if not slidedown.
$content.slideToggle(500, function () {
//execute this after slideToggle is done
//change text of header based on visibility of content div
$header.text(function () {
//change text based on condition
return $content.is(":visible") ? "Collapse" : "Expand";
});
});
});
This code is working successfully on the project that I am working on. The problem with this is that the elements that this code affects are positioned absolutely. When .field-name-field-pin-point it clicked the element .group dealer is hidden, but the .field-name-field-pin-point moves off of the page. Ideally, I would like the visibility to be set at none upon page load, but it would probably be easier to do that part in CSS. Here is what I am currently using:
jQuery(document).ready(function () {
jQuery('.node-202 .field-name-field-pin-point').click(function() {
jQuery(this).siblings('.group-dealer').toggle();
});
});
There will be more nodes that will be positioned differently so the full class name I provided is necessary. The markup (generally speaking) is as follows:
<div class="node-202">
<div class="group-dealer">...</div>
<div class="field-name-field-pin-point">...</div>
</div>
I am basically creating points on a map that when clicked, bring up a small window with more information about that location.
Here is a reference to my last post if you are looking for more information: Toggle Class Visibility by Clicking on another Class
I suggest your best approach is to add a css rule and just toggle a class on the elements
CSS
.group-dealer.hidden{ visibility:hidden}
JS
jQuery('.node-202 .field-name-field-pin-point').click(function() {
jQuery(this).siblings('.group-dealer').addClass('hidden');/* use toggleClass if more appropriate*/
})
Just toggle the visibility then
jQuery(document).ready(function () {
jQuery('.node-202 .field-name-field-pin-point').click(function() {
jQuery(this).siblings('.group-dealer').css('visibility', function(_,vis) {
return vis == 'hidden' ? 'visible' : 'hidden';
});
});
});
Try:
$('.node-202 .field-name-field-pin-point').click(function () {
if ($(this).siblings().css('visibility') == 'visible') {
$(this).siblings().css('visibility', 'hidden');
} else {
$(this).siblings().css('visibility', 'visible');
}
});
DEMO here.
Suppose I have some divs which I want to allow users to switch between. I would write functions like this:
show_A = function () {$('.a').show(); $('.b').hide(); $('.c').hide();}
show_B = function () {$('.a').hide(); $('.b').show(); $('.c').hide();}
show_C = function () {$('.a').hide(); $('.b').hide(); $('.c').show();}
Then attach these functions to links or whatever. What's the best practice for abstracting out this sort of behavior? The total amount of code grows at N^2 with the number of divs, which is no good.
Give all those divs that you want to hide a common class name and then show one of those. like:
html:
<div class="a toggle">a div</div>
<div class="b toggle">b div</div>
<div class="c toggle">c div</div>
Now the js:
show_A = function () {$('.toggle').hide(); $('.a').show();}
show_B = function () {$('.toggle').hide(); $('.b').show();}
show_C = function () {$('.toggle').hide(); $('.c').show();}
The way I've handled this is before was just to hide them all then show the one (or ones) that you want visible.
Something like...
var showSingleDiv = function(klass) {
$('.container > div').hide();
$(klass).show();
};
Granted you don't want to hide every div so you'll need to setup whatever .container is with your own markup.
For each click, you could hide all the divs and then show only the one you need.
You could use a class to tag the divs involved...
<div id="a" class="collapse">...</div>
<div id="b" class="collapse">...</div>
<div id="c" class="collapse">...</div>
And use:
$(".collapse").hide();
You can do something like, by adding a common class to all those elements:
<div class="toggle">a</div>
<div class="toggle">b</div>
<div class="toggle">c</div>
$('.toggle').click(function(){
$('.toggle:visible').hide(); //Hide all visible 'toggle' div's
$(this).show(); //Show the clicked div
});
You can use the :not() selector.
show_A = function () {$('.a').show(); $('div:not(.a)').hide();}
Maybe I'm not understanding the question, but it seems like what he's wanting is something along these lines:
$('div').each().click( function(){
var cls = $(this).attr('class');
if( $("div[class*='"+cls+"']").is(':visible')){ $("div[class*='"+cls+"']").hide();}//
else{ $("div[class*='"+cls+"']").show(); }
}
);
//Disclaimer - I did not check to see if the concatenated selector works, but adapted it from a reputable blog.