We Keep Coding

Javascript 2d array select around from single point

Say I have a 15x15 2d array
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, A, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
See the character A? at y:9 and x:4 (index starts with 0).
What I want to do here is to update the array where I select or update the 0s around the A to, say, asterisk (*).
For an example, lets say I want 0s around the A as far as 3 indexes to be updated as *
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, *, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, *, *, *, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, *, *, *, *, *, 0, 0, 0, 0, 0, 0, 0, 0],
[0, *, *, *, A, *, *, *, 0, 0, 0, 0, 0, 0, 0],
[0, 0, *, *, *, *, *, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, *, *, *, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, *, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
What is the most efficient way to achieve this?
EDIT
What I've tried:
var s_length = 4, coordinate_y_x = [9, 4]
for (let i1 = 0; i1 < s_length; i1++) {
for (let i = 0; i < s_length; i++) {
if (map[coordinate_y_x[0] - i][coordinate_y_x[1]] != undefined) map[coordinate_y_x[0] - i][coordinate_y_x[1]] = 1
if (map[coordinate_y_x[0]][coordinate_y_x[1] - i]!= undefined) map[coordinate_y_x[0]][coordinate_y_x[1] - i] = 1
}
for (let i = s_length; i > 0; i--) {
console.log("loop2");
if (map[coordinate_y_x[0] + i][coordinate_y_x[1]]!= undefined) map[coordinate_y_x[0] + i][coordinate_y_x[1]] = 1
if (map[coordinate_y_x[0]][coordinate_y_x[1] + i]!= undefined) map[coordinate_y_x[0]][coordinate_y_x[1] + i] = 1
}
}
I managed to change what's left, right, top, and bottom from this code with given point and length, but I can't seem to figure out how to do the rest (between directions)
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 1, 1, 1, A, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]

One way is with a somewhat spiral matrix walk, but instead of a "square" walk, yours will be diagonal / "diamond" shape. Additionally, we don't really care about the "connectiveness" of the path, so I'll jump around a bit. That is, when a walk has finished a ring, it isn't important that the next ring start on a neighboring cell of the previous ring's last step.
In your example data, I've marked the cells that the algorithm would visit in order (1st, 2nd, 3rd, etc.)
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 15, 7, 17, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 14, 6, 2, 8, 18, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 13, 5, 1, A, 3, 9, 19, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 24, 12, 4, 10, 20, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 23, 11, 21, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 22, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
Note, I've chosen to always start from the left side of the origin, but that is arbitrary. You could start from the top, right, or bottom side.
So our three loops (in order) will be
The length we want to "expand" by can be thought of as a separate "ring." So loop each ring.
Next, loop each "side" of that ring.
Finally, loop each "step" along that side.
To keep things symmetric, each side will only occupy a single "corner" cell. So for example when looping the 3rd ring, each side would only be 3 steps each. Here I have each side labeled as a, b, c, and d.
* * * b * * *
* * a * b * *
* a * * * b *
a * * X * * c
* d * * * c *
* * d * c * *
* * * d * * *
Otherwise the only tricky part is figuring out how to change directions as you loop each side.
A very simple way to do this is store "deltas," how much we expect each x and y value (where we currently are) to change for each step. We know we'll be moving 1 step each time, so it is just a matter of moving right / down (positive +) or left / up (negative -).
I decided to store these values in an array, but you can probably do some modulo math to switch between them. Looping over a constant is just a little easier to understand. So moving up and to the right would have an x_delta value of 1 and y_delta value of -1, etc.
Finally, you need a "in bounds" check as you are completing your walk. The algo will still try and "visit" these cells, but won't try to write to the array if it doesn't exist. This is one area of the algo you can probably improve.
Put it all together, and you have this:
const data = Array(15)
.fill()
.map(v => Array(15).fill(0));
// Assumes the graph won't contain `undefined` values. Otherwise, do a `length` check on the arrays
function inBounds(data, [y, x]) {
return data?.[y]?.[x] !== undefined;
}
const deltas = [
[ 1, -1], // Up right
[ 1, 1], // Down right
[-1, 1], // Down left
[-1, -1], // Up left
];
function fillFrom({origin: [oy, ox], data, length, value}) {
// Walk in diamond "rings" around our origin
for (let size = 1; size <= length; size++) {
// Start from the left side of our ring
let x = ox - size;
let y = oy;
// Move along 4 sides of the diamond
for (let [xd, yd] of deltas) {
// Move each step along the side
for (let step = 0; step < size; step++) {
if (inBounds(data, [y, x])) {
data[y][x] = value;
}
x += xd;
y += yd;
}
}
}
return data;
}
// Updates data "in place." Would need to deep clone if you wanted to keep things immutable
fillFrom({origin: [9, 4], data, length: 3, value: 1});
data[9][4] = 'A';
console.log(data.map(r => r.join('')).join('\n'));

Unable to print updated array value inside for loop

I need to print an array one by one. I tried to many ways but
I can't print updated array value inside for loop.
Anyone have any idea to get that data inside the for loop.
If my question is not clear, comment me and I can update.
var startMap;
function startmap() {
startMap = [
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ]
];
$(document).ready(function() {
startMap[10][10] = 1;
console.log(startMap)
});
}
function init() {
startmap();
console.log(startMap)
for (var i = 0; i < 20; i++) {
for (var j = 0; j < 20; j++) {
console.log(startMap[i][j])
}
}
}
<script src="https://cdnjs.cloudflare.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>
<body onload="init()">
</body>

Your question is a little vague, but is this roughly what you are trying to achieve?
const startMap = your array here;
startMap.forEach(function(asset){
console.log(JSON.stringify(startMap));
});

Your update is inside an event handler that runs after your code $(document).ready(function(){
Here's what your code does:
declare startMap
declare startmap (hint, don't use same name with different case)
declare init()
run init() (onload)
call startmap(), which
inits startMap
sets up a doc.ready to set the value (but does not run this code yet as your other code is already running)
returns from startmap()
back in init() dumps the startMap
finishes init()
system runs doc.ready
updates your value
If you look at the console.logs, you get:
> Array (20)
(400) 0
> Array (20)
expanding the 2nd Array(20) and you can see [10,10] value is 1.
If you add more console.logs (or step-through), eg as the last line of init() add console.log("end init") you get:
> Array (20)
(400) 0
end init
> Array (20)
confirming that the 2nd console.log(startMap) (inside the doc.ready) runs after init() has completed.
You don't need the doc.ready, so just remove that.
var startMap;
function startmap() {
startMap = [
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ]
];
//$(document).ready(function(){
startMap[10][10] = 1;
console.log(startMap)
console.log("end startmap")
//});
}
function init() {
startmap();
console.log(startMap)
for (var i = 0; i < 20; i++) {
for (var j = 0; j < 20; j++) {
console.log(startMap[i][j])
}
}
console.log("end init")
}
<script src="https://cdnjs.cloudflare.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>
<body onload="init()">
</body>

How to draw shapes to a canvas witha 2d array

I am making a game where I need to render onto a canvas from a 2d array I have this
var map = [
[1,0,1,0,1,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0],
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1],
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0],
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0],
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0],
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0]
]
function drawmap(){
for(y = 0;y < map.length;y++){
for(x = 0;x < map[0].length;x++){
switch(map[y][x]){
case 0:
ctx.fillStyle = "black";
break;
case 1:
ctx.fillStyle = "white";
break;
}
ctx.fillRect(x,y,x + tilesize * 16,y + tilesize * 8)
}
}
}
But it comes out small and warped, I think theirs something wrong with my math but I can figure it out.
Here's a picture
The HTML file when its ran

Ye, your math is incorrect...
it should be:
ctx.fillRect(x * tilesize, y * tilesize, tilesize, tilesize)
that assumes you have square tiles
Here is a sample in action
<canvas id="c" width=250 height=140></canvas>
<script>
const canvas = document.getElementById('c');
const ctx = canvas.getContext('2d');
var tilesize = 10
var map = [
[1, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1],
[0, 0, 0, 2, 0, 0, 0, 0, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 3, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0]
]
function drawmap() {
for (y = 0; y < map.length; y++) {
for (x = 0; x < map[0].length; x++) {
ctx.fillStyle = ["red", "blue", "cyan", "yellow"][map[y][x]]
ctx.fillRect(x * tilesize, y * tilesize, tilesize, tilesize)
}
}
}
drawmap()
</script>
I'm also using a color array to set the fill style:
ctx.fillStyle = ["red", "blue", "cyan", "yellow"][map[y][x]]

How can I update seats array for a particular movie time using mongoose in node.js

The Json that I am using. I want to get hold of seats array for movie name Avengers and movie time is 7:30 pm.
{
"_id": {
"$oid": "5adc21bd19398524589381a9"
},
"screens": [
{
"_id": {
"$oid": "5adc21bd19398524589381ad"
},
"movieName": "Avengers",
"movieTimings": [
{
"seats": [
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
],
"_id": {
"$oid": "5adc21bd19398524589381af"
},
"movieTime": "7:30 pm"
},
{
"seats": [
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
],
"_id": {
"$oid": "5adc21bd19398524589381ae"
},
"movieTime": "8:30 pm"
}
],

The following will give you the seats array for all screens having movieTime as "7:30 pm":
I have assumed that the main object is called movie.
movie.screens.map(function(scr){ //goes through the movie.screens array
return scr.movieTimings.filter(function(timing){
return timing.movieTime == "7:30 pm"; //for each screen object, returns only those that have their movieTime as 7:30 pm
})
.map(function(item){
return item.seats; // returns the seats array from the filtered screens
})
})
Hope this helps!

Indexing documents to elasticsearch using nodejs

I am trying to index documents to elasticsearch using nodejs. I use the http library from node.js. When I execute my test I get:
> node test2.js
data=(bodyText=bodytext)
STATUS: 400
HEADERS: {"content-type":"application/json; charset=UTF-8","content-length":"906"}
response: {"error":"ElasticSearchParseException[Failed to derive xcontent from (offset=0, length=17): [98, 111, 100, 121, 84, 101, 120, 116, 61, 98, 111, 100, 121, 116, 101, 120, 116, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]]","status":400}
However, a call to curl works as expected:
curl -XPOST 'http://localhost:9200/google/mail' -d '{
"bodytext": "bodytext"
}'
{ok":true,"_index":"google","_type":"mail","_id":"DMJXn80xTmqdny9l6BwV7w","_version":1}
The code
//elasticsearch.js
http = require('http');
stringify = require('querystring').stringify;
exports.indexDocument = function(document) {
var data = stringify(document);
//data = document;
var options = {
host: 'localhost',
port: '9200',
path: 'google/mail',
method: 'POST'
};
var request = http.request(options, function(res) {
console.log('STATUS: ' + res.statusCode);
console.log('HEADERS: ' + JSON.stringify(res.headers));
res.setEncoding('utf8');
res.on('data', function (response) {
console.log('response: ' + response);
});
});
console.log('data=('+data+')');
request.write(data);
request.end();
}
//test2.js
completeMsg = {
bodyText: "bodytext"
};
require('./elasticsearch').indexDocument(completeMsg);

In the curl example, you are sending a JSON string, but in your node example you are sending a querystring-encoded string. I expect that replacing:
var data = stringify(document)
...with...
var data = JSON.stringify(document)
will do what you want.