I want to stream real-time data from a server into a JavaScript webpage. For example, if the server receives meteorological data measurements every second, I want to visualize them as a moving graph on the webpage.
Naturally, Ajax can be used for this. However, this is not what the HTTP protocol was built for. It would help to have a faster, more lightweight protocol. Ideally, a persistent TCP connection. Are there any such possibilites in modern browsers, without using additional plugins and applets? Or can this be only done with Flash, Java, etc...?
I would check out Socket.IO. It tries to make use of WebSockets, but can fall back on standard AJAX.
Modern browsers support the Websocket implementation, however as David says, in case your browser does not support it, it will fall back to Flash sockets, Ajax, iframe long polling etc. It's a high level wrapper and easy to implement. Server side you will use nodejs and socket.io, check the documentation of socket.io
Related
I want to connect a bunch of weather sensors to a Raspberry PI. Writing the daemon that reads the sensors and writes the data to a database will be the easy part since I'm a systems programmer. I also want a simple cross platform UI for this device so I'd like to set my Raspberry Pi up as a WIFI hotspot that people can connect to and then just entering a URL like 'weather.local' into a browser which would take them to a web page where the weather sensor data is continually updated. I.e. I want the sensor daemon to 'push' updates to the web page.
The problem is that I'm no web developer. The solutions I can think of off the top of my head are:
Flash, which is out because I want this to work on mobile browsers.
Using Java script and hanging HTTP requests to a web service.
HTML5 socket.io which is presumably the same as WebSocket.
If I go with option (2) even if it's a kind of polling, I'll have to incorporate some form of HTTP server into my sensor daemon and I have a fair idea of how to code that. My question, however, regards the HTML5 socket IO. Can I use this to connect directly to a TCP/IP binary socket or do I need a server side WebSocket library? Also how widely is HTML5 socket.io/WebSocket implemented on mobile browsers?
WebSocket always begins with an upgrade handshake over HTTP, so you do need to have basic HTTP capability. It's simple enough that you can hand-code it.
WebSockets is basically supported by all modern browsers. It is not used that widely because it's a pain to set up on traditional HTTP servers and messes up with many proxies, but that's not a problem for you. As long as the client is a recent version of anything, it'll work.
A note about option 2: browsers have a native implementation of it — that means you don't need so much JavaScript on the client. You just create the EventSource object and listen to its events.
Of course I am aware of Ajax, but the problem with Ajax is that the browser should poll the server frequently to find whether there is new data. This increases server load.
Is there any better method (even using Ajax) other than polling the server frequently?
Yes, what you're looking for is COMET http://en.wikipedia.org/wiki/Comet_(programming). Other good Google terms to search for are AJAX-push and reverse-ajax.
Yes, it's called Reverse Ajax or Comet. Comet is basically an umbrella term for different ways of opening long-lived HTTP requests in order to push data in real-time to a web browser. I'd recommend StreamHub Push Server, they have some cool demos and it's much easier to get started with than any of the other servers. Check out the Getting Started with Comet and StreamHub Tutorial for a quick intro. You can use the Community Edition which is available to download for free but is limited to 20 concurrent users. The commercial version is well worth it for the support alone plus you get SSL and Desktop .NET & Java client adapters. Help is available via the Google Group, there's a good bunch of tutorials on the net and there's a GWT Comet adapter too.
Nowadays you should use WebSockets.
This is 2011 standard that allows to initiate connections with HTTP and then upgrade them to two-directional client-server message-based communication.
You can easily initiate the connection from javascript:
var ws = new WebSocket("ws://your.domain.com/somePathIfYouNeed?args=any");
ws.onmessage = function (evt)
{
var message = evt.data;
//decode message (with JSON or something) and do the needed
};
The sever-side handling depend on your tenchnology stack.
Look into Comet (a spoof on the fact that Ajax is a cleaning agent and so is Comet) which is basically "reverse Ajax." Be aware that this requires a long-lived server connection for each user to receive notifications so be aware of the performance implications when writing your app.
http://en.wikipedia.org/wiki/Comet_(programming)
Comet is definitely what you want. Depending on your language/framework requirements, there are different server libraries available. For example, WebSync is an IIS-integrated comet server for ASP.NET/C#/IIS developers, and there are a bunch of other standalone servers as well if you need tighter integration with other languages.
I would strongly suggest to invest some time on Comet, but I dont know an actual implementation or library you could use.
For an sort of "callcenter control panel" of a web app that involved updating agent and call-queue status for a live Callcenter we developed an in-house solution that works, but is far away from a library you could use.
What we did was to implement a small service on the server that talks to the phone-system, waits for new events and maintains a photograph of the situation. This service provides a small webserver.
Our web-clients connects over HTTP to this webserver and ask for the last photo (coded in XML), displays it and then goes again, asking for the new photo. The webserver at this point can:
Return the new photo, if there is one
Block the client for some seconds (30 in our setup) waiting for some event to ocurr and change the photograph. If no event was generated at that point, it returns the same photo, only to allow the connection to stay alive and not timeout the client.
This way, when clients polls, it get a response in 0 to 30 seconds max. If a new event was already generated it gets it immediately), otherwise it blocks until new event is generated.
It's basically polling, but it somewhat smart polling to not overheat the webserver. If Comet is not your answer, I'm sure this could be implemented using the same idea but using more extensively AJAX or coding in JSON for better results. This was designed pre-AJAX era, so there are lots of room for improvement.
If someone can provide a actual lightweight implementation of this, great!
An interesting alternative to Comet is to use sockets in Flash.
Yet another, standard, way is SSE (Server-Sent Events, also known as EventSource, after the JavaScript object).
Comet was actually coined by Alex Russell from Dojo Toolkit ( http://www.dojotoolkit.org ). Here is a link to more infomration http://cometdproject.dojotoolkit.org/
There are other methods. Not sure if they are "better" in your situation. You could have a Java applet that connects to the server on page load and waits for stuff to be sent by the server. It would be a quite a bit slower on start-up, but would allow the browser to receive data from the server on an infrequent basis, without polling.
You can use a Flash/Flex application on the client with BlazeDS or LiveCycle on the server side. Data can be pushed to the client using an RTMP connection. Be aware that RTMP uses a non standard port. But you can easily fall back to polling if the port is blocked.
It's possible to achive what you're aiming at through the use of persistent http connections.
Check out the Comet article over at wikipedia, that's a good place to start.
You're not providing much info but if you're looking at building some kind of event-driven site (a'la digg spy) or something along the lines of that you'll probably be looking at implementing a hidden IFRAME that connects to a url where the connection never closes and then you'll push script-tags from the server to the client in order to perform the updates.
Might be worth checking out Meteor Server which is a web server designed for COMET. Nice demo and it also is used by twitterfall.
Once a connection is opened to the server it can be kept open and the server can Push content a long while ago I did with using multipart/x-mixed-replace but this didn't work in IE.
I think you can do clever stuff with polling that makes it work more like push by not sending content unchanged headers but leaving the connection open but I've never done this.
You could try out our Comet Component - though it's extremely experimental...!
please check this library https://github.com/SignalR/SignalR to know how to push data to clients dynamically as it becomes available
You can also look into Java Pushlets if you are using jsp pages.
Might want to look at ReverseHTTP also.
How does a site programmed using TCP (that is, someone on the site is connected to the server and exchanging information via TCP) scales compared to just serving information via AJAX? Say the information exchanged is the same.
Trying to clarify: I'm asking specifially about scale: I've read that keeping thousands of TCP connections is resources (which?) demanding, as compared to just serving information statically. I want to know if this correct.
WebSockets is a technology that allows the server to push notifications to the client. AJAX on the other hand is a pull technology meaning that the client is sending requests to the server.
So for example if you had an application which needed to receive notifications from the server at regular intervals and update its UI, WebSocket is more adapted and much better. With AJAX you will have to hammer your server with requests at regular intervals to see whether some state changed on the server. With WebSockets, it's the server that will notify the client for some event happening on the server. And this will happen in a single request.
So I guess it would really depend on the type of application you are developing but WebSockets and AJAX are two completely different technologies solving different kind of problems. Which one to choose would depend on your scenario.
Websockets are not a one-for-one with AJAX; they offer substantially different features. Websockets offers the ability to 'push' data to the client. AJAX works by 'pushing' data and returning a response.
The purpose of WebSockets is to provide a low-latency, bi-directional, full-duplex and long-running connection between a browser and server. WebSockets opens up possibilities with browser applications that were previously unavailable using HTTP or AJAX.
However, there is certainly an overlap in purpose between WebSockets and AJAX. For example, when the browser wants to be notified of server events (i.e. push) either AJAX or WebSockets are both viable options. If your application needs low-latency push events then this would be a factor in favor of WebSockets which would definitely scale better in this scenario. On the other hand, if you need to work with existing frameworks and deployed technologies (OAuth, RESTful API's, proxies, etc.) then AJAX is preferable.
If you don't need the specific benefits that WebSockets provides, then it's probably a better idea to stick with existing techniques like AJAX because this allows you to re-use and integrate with an existing ecosystem of tools, technologies, security mechanisms, knowledge bases that have been developed over the last 7 years.
But overall, Websockets will outperform AJAX by a significant factor.
I don't think there's any difference when it comes to scalability between WebSockets and standards TCP connnections. WebSocket is an upgrade from a static one way pipe into a duplex one. The physical resources are the exact same.
The main advantage of WebSockets is that they run over port 80, so it avoids most firewall problems, but you have to first connect over standard HTTP.
Here's a good page that clearly shows the benefits of the WebSocket API compared to Ajax long polling (especially on a large scale): http://www.websocket.org/quantum.html
It basically comes down to the fact that once the initial HTTP handshake is established, data can go back and forth much more quickly because the header overhead is greatly reduced (this is what most people refer to as bidirectional communication).
As an off note, if you only need to be able to push data from the server on a regular basis, but you don't need to make many client-initiated requests, then using HTML5 server-sent events with occasional Ajax requests from the client might be just what you need and much easier to implement then the WebSocket API.
I am looking at facebook news feed/ticker right now and I am wondering what technology/architecture it uses to pull in data asynchronously when any of my connections make an update. One possibility that I can think of is a javascript setInterval on a function that aggressively polls the server for new data.
I wonder how efficient that is.
Another possible technology that I can think of is something like Comet/NodeJS architecture that pings the client when there is an update on the server. I am not too familiar with this technology.
If I wanted to create something similar to this. What should I be looking into? Is the first approach the preferred way to do this? What technologies are available out there that will allow me to do this?
There are several technologies to achieve this:
polling: the app makes a request every x milliseconds to check for updates
long polling: the app makes a request to the server, but the server only responds when it has new data available (usually if no new data is available in X seconds, an empty response is sent or the connection is killed)
forever frame: a hidden iframe is opened in the page and the request is made for a doc that relies on HTTP 1.1 chunked encoding
XHR streaming: allows successive messages to be sent from the server without requiring a new HTTP request after each response
WebSockets: this is the best option, it keeps the connection alive at all time
Flash WebSockets: if WS are not natively supported by the browser, then you can include a Flash script to enhance that functionality
Usually people use Flash WebSockets or long-polling when WebSockets (the most efficient transport) is not available in the browser.
A perfect example on how to combine many transport techniques and abstract them away is Socket.IO.
Additional resources:
http://en.wikipedia.org/wiki/Push_technology
http://en.wikipedia.org/wiki/Comet_(programming))
http://www.leggetter.co.uk/2011/08/25/what-came-before-websockets.html
Server polling with JavaScript
Is there a difference between long-polling and using Comet
http://techoctave.com/c7/posts/60-simple-long-polling-example-with-javascript-and-jquery
Video discussing different techniques: http://vimeo.com/27771528
The book Even Faster Websites has a full chapter (ch. 8) dedicated to 'Scaling with Comet'.
I could be wrong, but I think that Facebook relies on a "long polling" technique that keeps an http connection open to a server for a fixed amount of time. The data sent from the server triggers an event client side that is acted upon at that time. I would imagine that they use this technique to support the older browsers that do not have websocket support built in.
I, personally, have been working on an application with similar requirements and have opted to use a combination of node.js and socket.io. The socket.io module uses a variety of polling solutions and automatically chooses the best one based on what is available on the client.
Maybe you may have a look to Goliath (non-blocking IO server written in Ruby) : http://postrank-labs.github.com/goliath/
Are there websocket libraries (like ajax for jquery) I can use on the browsers with fallback to ajax long polling?
I found that Socket.IO implements a weird, arbitrary layer over the WebSocket protocol. I'd rather just pass raw data back and forth, so for my project, I went with web-socket-js.
web-socket-js works similarly to Socket.IO in that it reverts to using Flash sockets if WebSocket support is unavailable. Thus, it works in all the major browsers that support Flash (I tested this myself).
Just make sure you open port 843 in your firewall or you'll get a Flash security policy error. You'll probably need a script to listen on port 843 as well...I used em-websocket for the socket server, and in its readme I believe is a link to a Perl script that provides this.
Library with WebSockets support and fallback long polling solution would probably depend also on server side technology and not only browser client. Try to look at socket.io for example.
I have been using SignalR for the last several months, and it is awesome. It does what Socket.IO does, but maybe even better. It degrades as follows: Web Sockets, Server Sent Events, Forever Frame, AJAX long polling. Only works with .NET though.
https://github.com/SignalR/SignalR/wiki/Faq
Yes, you'll need server support for that as well. Kaazing WebSocket Gateway supports a very fast emulation/Polyfill. If you have a plugin like Flash it may use that (opportunistic optimization), but if you don't it emulates WebSocket with encrypted streaming, which is a lot more efficient than long polling. It comes with SSE and Cross Document Messaging support and emulation as well, as well as many higher level protocol abstractions (JMS/Stomp, XMPP, etc.)
Union Server has WebSocket support with fallback to comet-style AJAX communication. Union is a platform for creating connected applications, such as online multiplayer games.
http://www.unionplatform.com