Related
I would like to redirect the user onclick to a certain page "user/logged_in1" if the user is not already on that page and after the redirect a certain button must be clicked. This button opens a modal.
Doesn't work with this function:
function redirect_to_logged_in_and_open_modal() {
if(window.location.href.indexOf("logged_in") > -1) {
return
} else {
location.href="user/logged_in1";
document.getElementsByClassName("zimmerbtn")[0].click();
}
}
It seems it searched already for the button before the redirect happens and therefore the list is empty. How to fix this?
EDIT
This is a little bit more complex. The modal should only open if the user uses the redirect. If I use onload on the body tag, the modal will always open if the page is loaded, I don't need that. I need that modal only to be opened if the redirect happens.
The whole thing is a Python flask application:
{% if current_user.zahlung_iban == None and have_this_user_a_room != None %}
<li><a class="btn mybtn" onclick="redirect_to_logged_in_and_open_modal()" data-toggle="modal" data-target="#premium-special-modal"> Zimmer anbieten </a></li>
{% else %}
<li><a class="btn mybtn" href="{{ url_for('zimmer_einstellen') }}"> Zimmer anbieten </a></li>
{% endif %}
As you see there is a certain trigger for the button to become the redirect button.
EDIT
Okay working with a cookie sounds like a possible solution. But I cant figure out how to delete the cookie after the button was clicked, none of the proposed code works, eventhough it looks simple:
function redirect_to_logged_in_and_open_modal() {
if(window.location.href.indexOf("logged_in") > -1) {
return
} else {
location.href="user/logged_in1";
document.cookie = "redirected_coz_of_click";
}
}
$( document ).ready(function() {
if ($(".logged-in-container")[0]) {
var delete_cookie = function(name) {
document.cookie = name + '=;expires=Thu, 01 Jan 1970 00:00:01 GMT;';
};
if (document.cookie.indexOf('redirected_coz_of_click') > -1 ) {
document.getElementsByClassName("zimmerbtn")[0].click();
delete_cookie('redirected_coz_of_click');
console.log(document.cookie);
} else {
console.log("cookie removed");
}
}
});
1: Append a parameter to the redirect url
user/logged_in1?click=btn_id
2: On landing on that page you can then check if the parameters is there. Found this method
var getUrlParameter = function getUrlParameter(sParam) {
var sPageURL = decodeURIComponent(window.location.search.substring(1)),
sURLVariables = sPageURL.split('&'),
sParameterName,
i;
for (i = 0; i < sURLVariables.length; i++) {
sParameterName = sURLVariables[i].split('=');
if (sParameterName[0] === sParam) {
return sParameterName[1] === undefined ? true : sParameterName[1];
}
}
};
Found the method here: https://stackoverflow.com/a/21903119/3514785
So you could use it like this:
var btnToClickId = getUrlParameter("click");
3: With jquery (or javascript if you want) fire the click event on that btn:
$("#"+btnToClickId).click();
NB: You want to do the check after the page has loaded:
$(window).on("load",function() {
var btnToClickId = getUrlParameter("click")
if(btnToClickId) {
$("#"+btnToClickId).click();
}
});
So in summary
a: Edit your page and remove this line document.getElementsByClassName("zimmerbtn")[0].click(); because it is pointless
b: In the target page in the js copy and past the `getUrlParameter' method.
c: Then inside a on window load event listener do the url check as specified in 3.
ALTERNATIVE TO URL PARAMETER
You could instead use localStorage or some cookie to store the target id right before redirecting. Make sure you remember to clear it in the target page after grabbing it so that it is not always triggered even when you have not redirected from the page that triggers this whole process.
You can not access elements that have not even loaded yet.
By using location.href = '' you are simply directing a user to a page, any javascript after will fail because the page hasn't been loaded yet.
You tell us that you want to redirect a user to a page onclick. This sounds like the essential of an anchor tag:
Click Me
For step 2, just place the javascript on the page you are redirecting to. Bind to the load event of the page and then execute your javascript:
window.onload = function() {
document.getElementsByClassName("zimmerbtn")[0].click();
};
You can use cookie.
Set cookie when user click on the redirect button and when page is loaded, check if the cookie is set and open the modal. When you done with opening the modal clear the cookie. In that way you can easily achieve this.
Instead of triggering click. Call the onclick function in body onload method of user/logged_in1.
<body onload="openModal()">
You are trying to access a content on your initial page, but you have already redirected the user from that page, so this cannot be achieved by the current method.
I believe what you are trying to do is to open up a modal, after redirecting, do the following.
On your redirected page add the following, use jquery to achieve this
$( document ).ready(
// add the functionality to launch modal here
);
I created an onclick() function for this button:
onclick="redirect_to_logged_in_and_open_modal()"
In the function I check if I am not already on the logged_in site. If not I redirect but I add an additional parameter to the URL ?redirected.
In the next step if the logged_in is loaded and the parameter is in the URL the modal will also open, thats it.
Thanks #Zuks for the Idea adding a param to URL.
function redirect_to_logged_in_and_open_modal() {
if(window.location.href.indexOf("logged_in") > -1) {
return
} else {
window.location.assign("https://www.example.com/user/logged_in1?redirected");
}
}
$( document ).ready(function() {
if ($(".logged-in-container")[0]) {
if(window.location.href.indexOf("redirected") > -1) {
document.getElementsByClassName("zimmerbtn")[0].click();
}
}
});
How do you definitively detect whether or not the user has pressed the back button in the browser?
How do you enforce the use of an in-page back button inside a single page web application using a #URL system?
Why on earth don't browser back buttons fire their own events!?
(Note: As per Sharky's feedback, I've included code to detect backspaces)
So, I've seen these questions frequently on SO, and have recently run into the issue of controlling back button functionality myself. After a few days of searching for the best solution for my application (Single-Page with Hash Navigation), I've come up with a simple, cross-browser, library-less system for detecting the back button.
Most people recommend using:
window.onhashchange = function() {
//blah blah blah
}
However, this function will also be called when a user uses on in-page element that changes the location hash. Not the best user experience when your user clicks and the page goes backwards or forwards.
To give you a general outline of my system, I'm filling up an array with previous hashes as my user moves through the interface. It looks something like this:
function updateHistory(curr) {
window.location.lasthash.push(window.location.hash);
window.location.hash = curr;
}
Pretty straight forward. I do this to ensure cross-browser support, as well as support for older browsers. Simply pass the new hash to the function, and it'll store it for you and then change the hash (which is then put into the browser's history).
I also utilise an in-page back button that moves the user between pages using the lasthash array. It looks like this:
function goBack() {
window.location.hash = window.location.lasthash[window.location.lasthash.length-1];
//blah blah blah
window.location.lasthash.pop();
}
So this will move the user back to the last hash, and remove that last hash from the array (I have no forward button right now).
So. How do I detect whether or not a user has used my in-page back button, or the browser button?
At first I looked at window.onbeforeunload, but to no avail - that is only called if the user is going to change pages. This does not happen in a single-page-application using hash navigation.
So, after some more digging, I saw recommendations for trying to set a flag variable. The issue with this in my case, is that I would try to set it, but as everything is asynchronous, it wouldn't always be set in time for the if statement in the hash change. .onMouseDown wasn't always called in click, and adding it to an onclick wouldn't ever trigger it fast enough.
This is when I started to look at the difference between document, and window. My final solution was to set the flag using document.onmouseover, and disable it using document.onmouseleave.
What happens is that while the user's mouse is inside the document area (read: the rendered page, but excluding the browser frame), my boolean is set to true. As soon as the mouse leaves the document area, the boolean flips to false.
This way, I can change my window.onhashchange to:
window.onhashchange = function() {
if (window.innerDocClick) {
window.innerDocClick = false;
} else {
if (window.location.hash != '#undefined') {
goBack();
} else {
history.pushState("", document.title, window.location.pathname);
location.reload();
}
}
}
You'll note the check for #undefined. This is because if there is no history available in my array, it returns undefined. I use this to ask the user if they want to leave using a window.onbeforeunload event.
So, in short, and for people that aren't necessarily using an in-page back button or an array to store the history:
document.onmouseover = function() {
//User's mouse is inside the page.
window.innerDocClick = true;
}
document.onmouseleave = function() {
//User's mouse has left the page.
window.innerDocClick = false;
}
window.onhashchange = function() {
if (window.innerDocClick) {
//Your own in-page mechanism triggered the hash change
} else {
//Browser back button was clicked
}
}
And there you have it. a simple, three-part way to detect back button usage vs in-page elements with regards to hash navigation.
EDIT:
To ensure that the user doesn't use backspace to trigger the back event, you can also include the following (Thanks to #thetoolman on this Question):
$(function(){
/*
* this swallows backspace keys on any non-input element.
* stops backspace -> back
*/
var rx = /INPUT|SELECT|TEXTAREA/i;
$(document).bind("keydown keypress", function(e){
if( e.which == 8 ){ // 8 == backspace
if(!rx.test(e.target.tagName) || e.target.disabled || e.target.readOnly ){
e.preventDefault();
}
}
});
});
You can try popstate event handler, e.g:
window.addEventListener('popstate', function(event) {
// The popstate event is fired each time when the current history entry changes.
var r = confirm("You pressed a Back button! Are you sure?!");
if (r == true) {
// Call Back button programmatically as per user confirmation.
history.back();
// Uncomment below line to redirect to the previous page instead.
// window.location = document.referrer // Note: IE11 is not supporting this.
} else {
// Stay on the current page.
history.pushState(null, null, window.location.pathname);
}
history.pushState(null, null, window.location.pathname);
}, false);
Note: For the best results, you should load this code only on specific pages where you want to implement the logic to avoid any other unexpected issues.
The popstate event is fired each time when the current history entry changes (user navigates to a new state). That happens when user clicks on browser's Back/Forward buttons or when history.back(), history.forward(), history.go() methods are programatically called.
The event.state is property of the event is equal to the history state object.
For jQuery syntax, wrap it around (to add even listener after document is ready):
(function($) {
// Above code here.
})(jQuery);
See also: window.onpopstate on page load
See also the examples on Single-Page Apps and HTML5 pushState page:
<script>
// jQuery
$(window).on('popstate', function (e) {
var state = e.originalEvent.state;
if (state !== null) {
//load content with ajax
}
});
// Vanilla javascript
window.addEventListener('popstate', function (e) {
var state = e.state;
if (state !== null) {
//load content with ajax
}
});
</script>
This should be compatible with Chrome 5+, Firefox 4+, IE 10+, Safari 6+, Opera 11.5+ and similar.
if (window.performance && window.performance.navigation.type == window.performance.navigation.TYPE_BACK_FORWARD) {
alert('hello world');
}
This is the only one solution that worked for me (it's not a onepage website).
It's working with Chrome, Firefox and Safari.
I had been struggling with this requirement for quite a while and took some of the solutions above to implement it. However, I stumbled upon an observation and it seems to work across Chrome, Firefox and Safari browsers + Android and iPhone
On page load:
window.history.pushState({page: 1}, "", "");
window.onpopstate = function(event) {
// "event" object seems to contain value only when the back button is clicked
// and if the pop state event fires due to clicks on a button
// or a link it comes up as "undefined"
if(event){
// Code to handle back button or prevent from navigation
}
else{
// Continue user action through link or button
}
}
Let me know if this helps. If am missing something, I will be happy to understand.
In javascript, navigation type 2 means browser's back or forward button clicked and the browser is actually taking content from cache.
if(performance.navigation.type == 2)
{
//Do your code here
}
Correct answer is already there to answer the question. I want to mention new JavaScript API PerformanceNavigationTiming, it's replacing deprecated performance.navigation.
Following code will log in console "back_forward" if user landed on your page using back or forward button. Take a look at compatibility table before using it in your project.
var perfEntries = performance.getEntriesByType("navigation");
for (var i = 0; i < perfEntries.length; i++) {
console.log(perfEntries[i].type);
}
This will definitely work (For detecting back button click)
$(window).on('popstate', function(event) {
alert("pop");
});
My variant:
const inFromBack = performance && performance.getEntriesByType( 'navigation' ).map( nav => nav.type ).includes( 'back_forward' )
Browser: https://jsfiddle.net/Limitlessisa/axt1Lqoz/
For mobile control: https://jsfiddle.net/Limitlessisa/axt1Lqoz/show/
$(document).ready(function() {
$('body').on('click touch', '#share', function(e) {
$('.share').fadeIn();
});
});
// geri butonunu yakalama
window.onhashchange = function(e) {
var oldURL = e.oldURL.split('#')[1];
var newURL = e.newURL.split('#')[1];
if (oldURL == 'share') {
$('.share').fadeOut();
e.preventDefault();
return false;
}
//console.log('old:'+oldURL+' new:'+newURL);
}
.share{position:fixed; display:none; top:0; left:0; width:100%; height:100%; background:rgba(0,0,0,.8); color:white; padding:20px;
<!DOCTYPE html>
<html>
<head>
<title>Back Button Example</title>
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
</head>
<body style="text-align:center; padding:0;">
Share
<div class="share" style="">
<h1>Test Page</h1>
<p> Back button press please for control.</p>
</div>
</body>
</html>
See this:
history.pushState(null, null, location.href);
window.onpopstate = function () {
history.go(1);
};
it works fine...
I was able to use some of the answers in this thread and others to get it working in IE and Chrome/Edge. history.pushState for me wasn't supported in IE11.
if (history.pushState) {
//Chrome and modern browsers
history.pushState(null, document.title, location.href);
window.addEventListener('popstate', function (event) {
history.pushState(null, document.title, location.href);
});
}
else {
//IE
history.forward();
}
A full-fledged component can be implemented only if you redefine the API (change the methods of object ' history ')
I will share the class just written.
Tested on Chrome and Mozilla
Support only HTML5 and ECMAScript5-6
class HistoryNavigation {
static init()
{
if(HistoryNavigation.is_init===true){
return;
}
HistoryNavigation.is_init=true;
let history_stack=[];
let n=0;
let current_state={timestamp:Date.now()+n};
n++;
let init_HNState;
if(history.state!==null){
current_state=history.state.HNState;
history_stack=history.state.HNState.history_stack;
init_HNState=history.state.HNState;
} else {
init_HNState={timestamp:current_state.timestamp,history_stack};
}
let listenerPushState=function(params){
params=Object.assign({state:null},params);
params.state=params.state!==null?Object.assign({},params.state):{};
let h_state={ timestamp:Date.now()+n};
n++;
let key = history_stack.indexOf(current_state.timestamp);
key=key+1;
history_stack.splice(key);
history_stack.push(h_state.timestamp);
h_state.history_stack=history_stack;
params.state.HNState=h_state;
current_state=h_state;
return params;
};
let listenerReplaceState=function(params){
params=Object.assign({state:null},params);
params.state=params.state!==null?Object.assign({},params.state):null;
let h_state=Object.assign({},current_state);
h_state.history_stack=history_stack;
params.state.HNState=h_state;
return params;
};
let desc=Object.getOwnPropertyDescriptors(History.prototype);
delete desc.constructor;
Object.defineProperties(History.prototype,{
replaceState:Object.assign({},desc.replaceState,{
value:function(state,title,url){
let params={state,title,url};
HistoryNavigation.dispatchEvent('history.state.replace',params);
params=Object.assign({state,title,url},params);
params=listenerReplaceState(params);
desc.replaceState.value.call(this,params.state,params.title,params.url);
}
}),
pushState:Object.assign({},desc.pushState,{
value:function(state,title,url){
let params={state,title,url};
HistoryNavigation.dispatchEvent('history.state.push',params);
params=Object.assign({state,title,url},params);
params=listenerPushState(params);
return desc.pushState.value.call(this, params.state, params.title, params.url);
}
})
});
HistoryNavigation.addEventListener('popstate',function(event){
let HNState;
if(event.state==null){
HNState=init_HNState;
} else {
HNState=event.state.HNState;
}
let key_prev=history_stack.indexOf(current_state.timestamp);
let key_state=history_stack.indexOf(HNState.timestamp);
let delta=key_state-key_prev;
let params={delta,event,state:Object.assign({},event.state)};
delete params.state.HNState;
HNState.history_stack=history_stack;
if(event.state!==null){
event.state.HNState=HNState;
}
current_state=HNState;
HistoryNavigation.dispatchEvent('history.go',params);
});
}
static addEventListener(...arg)
{
window.addEventListener(...arg);
}
static removeEventListener(...arg)
{
window.removeEventListener(...arg);
}
static dispatchEvent(event,params)
{
if(!(event instanceof Event)){
event=new Event(event,{cancelable:true});
}
event.params=params;
window.dispatchEvent(event);
};
}
HistoryNavigation.init();
// exemple
HistoryNavigation.addEventListener('popstate',function(event){
console.log('Will not start because they blocked the work');
});
HistoryNavigation.addEventListener('history.go',function(event){
event.params.event.stopImmediatePropagation();// blocked popstate listeners
console.log(event.params);
// back or forward - see event.params.delta
});
HistoryNavigation.addEventListener('history.state.push',function(event){
console.log(event);
});
HistoryNavigation.addEventListener('history.state.replace',function(event){
console.log(event);
});
history.pushState({h:'hello'},'','');
history.pushState({h:'hello2'},'','');
history.pushState({h:'hello3'},'','');
history.back();
```
Here's my take at it. The assumption is, when the URL changes but there has no click within the document detected, it's a browser back (yes, or forward). A users click is reset after 2 seconds to make this work on pages that load content via Ajax:
(function(window, $) {
var anyClick, consoleLog, debug, delay;
delay = function(sec, func) {
return setTimeout(func, sec * 1000);
};
debug = true;
anyClick = false;
consoleLog = function(type, message) {
if (debug) {
return console[type](message);
}
};
$(window.document).click(function() {
anyClick = true;
consoleLog("info", "clicked");
return delay(2, function() {
consoleLog("info", "reset click state");
return anyClick = false;
});
});
return window.addEventListener("popstate", function(e) {
if (anyClick !== true) {
consoleLog("info", "Back clicked");
return window.dataLayer.push({
event: 'analyticsEvent',
eventCategory: 'test',
eventAction: 'test'
});
}
});
})(window, jQuery);
The document.mouseover does not work for IE and FireFox.
However I have tried this :
$(document).ready(function () {
setInterval(function () {
var $sample = $("body");
if ($sample.is(":hover")) {
window.innerDocClick = true;
} else {
window.innerDocClick = false;
}
});
});
window.onhashchange = function () {
if (window.innerDocClick) {
//Your own in-page mechanism triggered the hash change
} else {
//Browser back or forward button was pressed
}
};
This works for Chrome and IE and not FireFox. Still working to get FireFox right. Any easy way on detecting Browser back/forward button click are welcome, not particularly in JQuery but also AngularJS or plain Javascript.
I solved it by keeping track of the original event that triggered the hashchange (be it a swipe, a click or a wheel), so that the event wouldn't be mistaken for a simple landing-on-page, and using an additional flag in each of my event bindings. The browser won't set the flag again to false when hitting the back button:
var evt = null,
canGoBackToThePast = true;
$('#next-slide').on('click touch', function(e) {
evt = e;
canGobackToThePast = false;
// your logic (remember to set the 'canGoBackToThePast' flag back to 'true' at the end of it)
}
<input style="display:none" id="__pageLoaded" value=""/>
$(document).ready(function () {
if ($("#__pageLoaded").val() != 1) {
$("#__pageLoaded").val(1);
} else {
shared.isBackLoad = true;
$("#__pageLoaded").val(1);
// Call any function that handles your back event
}
});
The above code worked for me. On mobile browsers, when the user clicked on the back button, we wanted to restore the page state as per his previous visit.
Solution for Kotlin/JS (React):
import org.w3c.dom.events.Event
import kotlin.browser.document
import kotlin.browser.window
...
override fun componentDidMount() {
window.history.pushState(null, document.title, window.location.href)
window.addEventListener("popstate", actionHandler)
}
...
val actionHandler: (Event?) -> Unit = {
window.history.pushState(
null,
document.title,
window.location.href
)
// add your actions here
}
Was looking for a solution for this issue and put together a simple skeleton test html based on a few answers here and the MDN Web Doc pages for History.pushState() and WindowEventHandlers.onpopstate.
The following HTML and JavaScript is easy enough to copy and paste and test.
Works with back and forward browser buttons, shortcut keys, adds a change to the URL (which is important in some cases).
Simply enough to add to existing code key points and should be expandable too.
<html>
<body>
<div id="p1">Option 1</div>
<div id="p2">Option 2</div>
<div id="p3">Option 3</div>
<div id="p4">Option 4</div>
<div id="c"></div>
<script>
var chg={
set:function(str){
var d=document.getElementById("c");
d.textContent=str;
},
go:function(e){
var s={"p":this.id};
chg.set(s.p);
hstry.add(s);
}
};
var hstry={
add:function(s){
var u=new URL(window.location);
u.searchParams.set("x",s.p);
window.history.pushState(s,"",u);
},
adjust:function(state){
if(state.p){
chg.set(state.p);
}
}
};
window.onpopstate=function(e){
console.log("popstate, e.state:["+ JSON.stringify(e.state) +"]");
hstry.adjust(e.state);
}
window.onload=function(){
var i,d,a=["p1","p2","p3","p4"];
for(i=0;i<a.length;i++){
d=document.getElementById(a[i]);
d.addEventListener("click",chg.go,false);
}
}
</script>
</body>
</html>
browser will emit popstate event if you navigate through your app with calling
window.history.pushState({},'','/to')
If you manually enter the addresses into the address bar and click on the back button, popstate event will NOT be fired.
If you navigate in your app with this simplified function
const navigate = (to) => {
window.history.pushState({}, ",", to);
};
then this will work
const handlePopstate = () => {
console.log("popped");
};
window.addEventListener("popstate", handlePopstate);
I tried the above options but none of them is working for me. Here is the solution
if(window.event)
{
if(window.event.clientX < 40 && window.event.clientY < 0)
{
alert("Browser back button is clicked...");
}
else
{
alert("Browser refresh button is clicked...");
}
}
Refer this link http://www.codeproject.com/Articles/696526/Solution-to-Browser-Back-Button-Click-Event-Handli for more details
I am doing an online quiz application in PHP. I want to restrict the user from going back in an exam.
I have tried the following script, but it stops my timer.
What should I do?
The timer is stored in file cdtimer.js.
<script type="text/javascript">
window.history.forward();
function noBack()
{
window.history.forward();
}
</script>
<body onLoad="noBack();" onpageshow="if (event.persisted) noBack();" onUnload="">
I have the exam timer which takes a duration for the exam from a MySQL value. The timer starts accordingly, but it stops when I put the code in for disabling the back button. What is my problem?
There are numerous reasons why disabling the back button will not really work. Your best bet is to warn the user:
window.onbeforeunload = function() { return "Your work will be lost."; };
This page does list a number of ways you could try to disable the back button, but none are guaranteed:
http://www.irt.org/script/311.htm
It is generally a bad idea overriding the default behavior of the web browser. A client-side script does not have the sufficient privilege to do this for security reasons.
There are a few similar questions asked as well,
How can I prevent the backspace key from navigating back?
How can I prevent the browser's default history back action for the backspace button with JavaScript?
You can-not actually disable the browser back button. However, you can do magic using your logic to prevent the user from navigating back which will create an impression like it is disabled. Here is how - check out the following snippet.
(function (global) {
if(typeof (global) === "undefined") {
throw new Error("window is undefined");
}
var _hash = "!";
var noBackPlease = function () {
global.location.href += "#";
// Making sure we have the fruit available for juice (^__^)
global.setTimeout(function () {
global.location.href += "!";
}, 50);
};
global.onhashchange = function () {
if (global.location.hash !== _hash) {
global.location.hash = _hash;
}
};
global.onload = function () {
noBackPlease();
// Disables backspace on page except on input fields and textarea..
document.body.onkeydown = function (e) {
var elm = e.target.nodeName.toLowerCase();
if (e.which === 8 && (elm !== 'input' && elm !== 'textarea')) {
e.preventDefault();
}
// Stopping the event bubbling up the DOM tree...
e.stopPropagation();
};
}
})(window);
This is in pure JavaScript, so it would work in most of the browsers. It would also disable the backspace key, but that key will work normally inside input fields and textarea.
Recommended Setup:
Place this snippet in a separate script and include it on a page where you want this behavior. In the current setup it will execute the onload event of the DOM which is the ideal entry point for this code.
Working DEMO!
It was tested and verified in the following browsers,
Chrome.
Firefox.
Internet Explorer (8-11) and Edge.
Safari.
I came across this, needing a solution which worked correctly and "nicely" on a variety of browsers, including Mobile Safari (iOS 9 at time of posting). None of the solutions were quite right. I offer the following (tested on Internet Explorer 11, Firefox, Chrome, and Safari):
history.pushState(null, document.title, location.href);
window.addEventListener('popstate', function (event)
{
history.pushState(null, document.title, location.href);
});
Note the following:
history.forward() (my old solution) does not work on Mobile Safari --- it seems to do nothing (i.e., the user can still go back). history.pushState() does work on all of them.
the third argument to history.pushState() is a url. Solutions which pass a string like 'no-back-button' or 'pagename' seem to work OK, until you then try a Refresh/Reload on the page, at which point a "Page not found" error is generated when the browser tries to locate a page with that as its URL. (The browser is also likely to include that string in the address bar when on the page, which is ugly.) location.href should be used for the URL.
the second argument to history.pushState() is a title. Looking around the web most places say it is "not used", and all the solutions here pass null for that. However, in Mobile Safari at least, that puts the page's URL into the history dropdown the user can access. But when it adds an entry for a page visit normally, it puts in its title, which is preferable. So passing document.title for that results in the same behaviour.
<script>
window.location.hash = "no-back-button";
// Again because Google Chrome doesn't insert
// the first hash into the history
window.location.hash = "Again-No-back-button";
window.onhashchange = function(){
window.location.hash = "no-back-button";
}
</script>
For restricting the browser back event:
window.history.pushState(null, "", window.location.href);
window.onpopstate = function () {
window.history.pushState(null, "", window.location.href);
};
This code will disable the back button for modern browsers which support the HTML5 History API. Under normal circumstances, pushing the back button goes back one step, to the previous page. If you use history.pushState(), you start adding extra sub-steps to the current page. The way it works is, if you were to use history.pushState() three times, then start pushing the back button, the first three times it would navigate back in these sub-steps, and then the fourth time it would go back to the previous page.
If you combine this behaviour with an event listener on the popstate event, you can essentially set up an infinite loop of sub-states. So, you load the page, push a sub-state, then hit the back button, which pops a sub-state and also pushes another one, so if you push the back button again it will never run out of sub-states to push. If you feel that it's necessary to disable the back button, this will get you there.
history.pushState(null, null, 'no-back-button');
window.addEventListener('popstate', function(event) {
history.pushState(null, null, 'no-back-button');
});
How to block coming backwards functionality:
history.pushState(null, null, location.href);
window.onpopstate = function () {
history.go(1);
};
None of the most-upvoted answers worked for me in Chrome 79. It looks like Chrome changed its behavior with respect to the Back button after version 75. See here:
https://support.google.com/chrome/thread/8721521?hl=en
However, in that Google thread, the answer provided by Azrulmukmin Azmi at the very end did work. This is his solution.
<script>
history.pushState(null, document.title, location.href);
history.back();
history.forward();
window.onpopstate = function () {
history.go(1);
};
</script>
The problem with Chrome is that it doesn't trigger onpopstate event
unless you make browser action ( i.e. call history.back). That's why
I've added those to script.
I don't entirely understand what he wrote, but apparently an additional history.back() / history.forward() is now required for blocking Back in Chrome 75+.
React
For modal component in React project, the open or close of the modal, controlling browser back is a necessary action.
The stopBrowserBack: the stop of the browser back button functionality, also get a callback function. This callback function is what you want to do:
const stopBrowserBack = callback => {
window.history.pushState(null, "", window.location.href);
window.onpopstate = () => {
window.history.pushState(null, "", window.location.href);
callback();
};
};
The startBrowserBack: the revival of the browser back button functionality:
const startBrowserBack = () => {
window.onpopstate = undefined;
window.history.back();
};
The usage in your project:
handleOpenModal = () =>
this.setState(
{ modalOpen: true },
() => stopBrowserBack(this.handleCloseModal)
);
handleCloseModal = () =>
this.setState(
{ modalOpen: false },
startBrowserBack
);
This is the way I could it accomplish it.
Weirdly, changing window.location didn't work out fine in Google Chrome and Safari.
It happens that location.hash doesn't create an entry in the history for Chrome and Safari. So you will have to use the pushstate.
This is working for me in all browsers.
history.pushState({ page: 1 }, "title 1", "#nbb");
window.onhashchange = function (event) {
window.location.hash = "nbb";
};
history.pushState(null, null, document.URL);
window.addEventListener('popstate', function () {
history.pushState(null, null, document.URL);
});
This JavaScript code does not allow any user to go back (works in Chrome, Firefox, Internet Explorer, and Edge).
This article on jordanhollinger.com is the best option I feel. Similar to Razor's answer but a bit clearer. Code below; full credits to Jordan Hollinger:
Page before:
<a href="/page-of-no-return.htm#no-back>You can't go back from the next page</a>
Page of no return's JavaScript:
// It works without the History API, but will clutter up the history
var history_api = typeof history.pushState !== 'undefined'
// The previous page asks that it not be returned to
if ( location.hash == '#no-back' ) {
// Push "#no-back" onto the history, making it the most recent "page"
if ( history_api ) history.pushState(null, '', '#stay')
else location.hash = '#stay'
// When the back button is pressed, it will harmlessly change the url
// hash from "#stay" to "#no-back", which triggers this function
window.onhashchange = function() {
// User tried to go back; warn user, rinse and repeat
if ( location.hash == '#no-back' ) {
alert("You shall not pass!")
if ( history_api ) history.pushState(null, '', '#stay')
else location.hash = '#stay'
}
}
}
<html>
<head>
<title>Disable Back Button in Browser - Online Demo</title>
<style type="text/css">
body, input {
font-family: Calibri, Arial;
}
</style>
<script type="text/javascript">
window.history.forward();
function noBack() {
window.history.forward();
}
</script>
</head>
<body onload="noBack();" onpageshow="if (event.persisted) noBack();" onunload="">
<H2>Demo</H2>
<p>This page contains the code to avoid Back button.</p>
<p>Click here to Goto NoBack Page</p>
</body>
</html>
This code was tested with the latest Chrome and Firefox browsers.
<script type="text/javascript">
history.pushState(null, null, location.href);
history.back();
history.forward();
window.onpopstate = function () { history.go(1); };
</script>
Try it with ease:
history.pushState(null, null, document.title);
window.addEventListener('popstate', function () {
history.pushState(null, null, document.title);
});
You can just put a small script and then check. It won't allow you to visit previous page.
This is done in JavaScript.
<script type="text/javascript">
function preventbackbutton() { window.history.forward(); }
setTimeout("preventbackbutton()", 0);
window.onunload = function () { null };
</script>
The window.onunload function fires when you try to visit back or previous page through browser.
Very simple and clean function to break the back arrow without interfering with the page afterward.
Benefits:
Loads instantaneously and restores original hash, so the user isn't distracted by URL visibly changing.
The user can still exit by pressing back 10 times (that's a good thing), but not accidentally
No user interference like other solutions using onbeforeunload
It only runs once and doesn't interfere with further hash manipulations in case you use that to track state
Restores original hash, so almost invisible.
Uses setInterval, so it doesn't break slow browsers and always works.
Pure JavaScript, does not require HTML5 history, works everywhere.
Unobtrusive, simple, and plays well with other code.
Does not use unbeforeunload which interrupts user with modal dialog.
It just works without fuss.
Note: some of the other solutions use onbeforeunload. Please do not use onbeforeunload for this purpose, which pops up a dialog whenever users try to close the window, hit backarrow, etc. Modals like onbeforeunload are usually only appropriate in rare circumstances, such as when they've actually made changes on screen and haven't saved them, not for this purpose.
How It Works
Executes on page load
Saves your original hash (if one is in the URL).
Sequentially appends #/noop/{1..10} to the hash
Restores the original hash
That's it. No further messing around, no background event monitoring, nothing else.
Use It In One Second
To deploy, just add this anywhere on your page or in your JavaScript code:
<script>
/* Break back button */
window.onload = function(){
var i = 0;
var previous_hash = window.location.hash;
var x = setInterval(function(){
i++;
window.location.hash = "/noop/" + i;
if (i==10){
clearInterval(x);
window.location.hash = previous_hash;
}
}, 10);
}
</script>
In a modern browser this seems to work:
// https://developer.mozilla.org/en-US/docs/Web/API/History_API
let popHandler = () => {
if (confirm('Go back?')) {
window.history.back()
} else {
window.history.forward()
setTimeout(() => {
window.addEventListener('popstate', popHandler, {once: true})
}, 50) // delay needed since the above is an async operation for some reason
}
}
window.addEventListener('popstate', popHandler, {once: true})
window.history.pushState(null,null,null)
I had this problem with React (class component).
And I solved it easily:
componentDidMount() {
window.addEventListener("popstate", e => {
this.props.history.goForward();
}
}
I've used HashRouter from react-router-dom.
You simply cannot and should not do this. However, this might be helpful:
<script type = "text/javascript" >
history.pushState(null, null, 'pagename');
window.addEventListener('popstate', function(event) {
history.pushState(null, null, 'pagename');
});
</script>
This works in my Google Chrome and Firefox.
This seems to have worked for us in disabling the back button on the browser, as well as the backspace button taking you back.
history.pushState(null, null, $(location).attr('href'));
window.addEventListener('popstate', function () {
history.pushState(null, null, $(location).attr('href'));
});
Just run code snippet right away and try going back
history.pushState(null, null, window.location.href);
history.back();
window.onpopstate = () => history.forward();
<script src="~/main.js" type="text/javascript"></script>
<script type="text/javascript">
window.history.forward();
function noBack() {
window.history.forward();
}
</script>
Try this to prevent the backspace button in Internet Explorer which by default acts as "Back":
<script language="JavaScript">
$(document).ready(function() {
$(document).unbind('keydown').bind('keydown', function (event) {
var doPrevent = false;
if (event.keyCode === 8 ) {
var d = event.srcElement || event.target;
if ((d.tagName.toUpperCase() === 'INPUT' &&
(
d.type.toUpperCase() === 'TEXT' ||
d.type.toUpperCase() === 'PASSWORD' ||
d.type.toUpperCase() === 'FILE' ||
d.type.toUpperCase() === 'EMAIL' ||
d.type.toUpperCase() === 'SEARCH' ||
d.type.toUpperCase() === 'DATE' )
) ||
d.tagName.toUpperCase() === 'TEXTAREA') {
doPrevent = d.readOnly || d.disabled;
}
else {
doPrevent = true;
}
}
if (doPrevent) {
event.preventDefault();
}
try {
document.addEventListener('keydown', function (e) {
if ((e.keyCode === 13)) {
//alert('Enter keydown');
e.stopPropagation();
e.preventDefault();
}
}, true);
}
catch (err) {
}
});
});
</script>
It's basically assigning the window's "onbeforeunload" event along with the ongoing document 'mouseenter' / 'mouseleave' events so the alert only triggers when clicks are outside the document scope (which then could be either the back or forward button of the browser)
$(document).on('mouseenter', function(e) {
window.onbeforeunload = null;
}
);
$(document).on('mouseleave', function(e) {
window.onbeforeunload = function() { return "You work will be lost."; };
}
);
Just set location.hash="Something". On pressing the back button, the hash will get removed from the URL, but the page won't go back.
This method is good for preventing going back accidentally, but for security purposes you should design your backend for preventing reanswering.
Some of the solutions here will not prevent a back event from occurring - they let a back event happen (and data held about the page in the browsers memory is lost) and then they play a forward event to try and hide the fact that a back event just happened. Which is unsuccessful if the page held transient state.
I wrote this solution for React (when react router is not being used), which is based on vrfvr's answer.
It will truly stop the back button from doing anything unless the user confirms a popup:
const onHashChange = useCallback(() => {
const confirm = window.confirm(
'Warning - going back will cause you to loose unsaved data. Really go back?',
);
window.removeEventListener('hashchange', onHashChange);
if (confirm) {
setTimeout(() => {
window.history.go(-1);
}, 1);
} else {
window.location.hash = 'no-back';
setTimeout(() => {
window.addEventListener('hashchange', onHashChange);
}, 1);
}
}, []);
useEffect(() => {
window.location.hash = 'no-back';
setTimeout(() => {
window.addEventListener('hashchange', onHashChange);
}, 1);
return () => {
window.removeEventListener('hashchange', onHashChange);
};
}, []);
I create one HTML page (index.html). I also create a one (mechanism.js) inside a script folder / directory. Then, I lay all my content inside of (index.html) using form, table, span, and div tags as needed. Now, here's the trick that will make back / forward do nothing!
First, the fact that you have only one page! Second, the use of JavaScript with span / div tags to hide and display content on the same page when needed via regular links!
Inside 'index.html':
<td width="89px" align="right" valign="top" style="letter-spacing:1px;">
<small>
<b>
IN
</b>
</small>
[ <span id="inCountSPN">0</span> ]
</td>
Inside 'mechanism.js':
function DisplayInTrafficTable()
{
var itmsCNT = 0;
var dsplyIn = "";
for (i=0; i<inTraffic.length; i++)
{
dsplyIn += "<tr><td width='11'></td><td align='right'>" + (++itmsCNT) + "</td><td width='11'></td><td><b>" + inTraffic[i] + "</b></td><td width='11'></td><td>" + entryTimeArray[i] + "</td><td width='11'></td><td>" + entryDateArray[i] + "</td><td width='11'></td></tr>";
}
document.getElementById('inOutSPN').innerHTML =
"" +
"<table border='0' style='background:#fff;'><tr><th colspan='21' style='background:#feb;padding:11px;'><h3 style='margin-bottom:-1px;'>INCOMING TRAFFIC REPORT</h3>" +
DateStamp() +
" - <small><a href='#' style='letter-spacing:1px;' onclick='OpenPrintableIn();'>PRINT</a></small></th></tr><tr style='background:#eee;'><td></td><td><b>###</b></td><td></td><td><b>ID #</b></td><td></td><td width='79'><b>TYPE</b></td><td></td><td><b>FIRST</b></td><td></td><td><b>LAST</b></td><td></td><td><b>PLATE #</b></td><td></td><td><b>COMPANY</b></td><td></td><td><b>TIME</b></td><td></td><td><b>DATE</b></td><td></td><td><b>IN / OUT</b></td><td></td></tr>" +
dsplyIn.toUpperCase() +
"</table>" +
"";
return document.getElementById('inOutSPN').innerHTML;
}
It looks hairy, but note the function names and calls, embedded HTML, and the span tag id calls. This was to show how you can inject different HTML into same span tag on same page! How can Back/Forward affect this design? It cannot, because you are hiding objects and replacing others all on the same page!
How can we hide and display? Here goes:
Inside functions in ' mechanism.js ' as needed, use:
document.getElementById('textOverPic').style.display = "none"; //hide
document.getElementById('textOverPic').style.display = ""; //display
Inside ' index.html ' call functions through links:
<img src="images/someimage.jpg" alt="" />
<span class="textOverPic" id="textOverPic"></span>
and
Introduction
In my case this was a shopping order. So I disabled the button. When the user clicked back, the button was disabled still. When they clicked back one more time, and then clicked a page button to go forward. I knew their order was submitted and skipped to another page.
In the case when the page actually refreshed which would make the button (theoretically), available; I was then able to react in the page load that the order was already submitted and redirected then too.
This code is full javascript.
Put this on your home page or whatever you need when someon goes back it brings them to the page they were previously on.
<script type="text/javascript">
function preventBack() {
window.history.forward();
}
setTimeout("preventBack()", 0);
window.onunload = function () { null };
</script>
Very new to Javascript, so working on my first project. Attempting to run a script that gathers listing numbers, opens them in a URL and clicks an element on the loaded page. I can't get .click() to run on the resulting loaded page.
I've tried to set the logIn function to only run once the resulting page has loaded, but it doesn't seem to be doing the trick. AM I missing something basic?
var listingNum = prompt("Listing numbers").split(" ");
logIn = function(){
if(document.readyState === "complete"){
document.getElementById('SignInAsMemberLinkHeader').click();
}
};
for(i = 0; i < listingNum.length; i++){
window.open("http://www.website.com" + listingNum[i],"_self");
setInterval(logIn(), 4000);
};
Okay, the following test harness worked for me. I had to change your _self reference to _blank, so that each page loads separately and doesn't overwrite the operation of the parent page. You then just handle the load event of each window that is instantiated using window.open(). This was the part you were missing. You weren't handling the load events of the loaded windows.
You may wish to check that the SignInAsMemberLinkHeader element exists prior to calling click() on it, but I'll leave that up to you to implement.
NB this will not work if cross site scripting restrictions apply.
Hope this helps :)
<!DOCTYPE HTML>
<html>
<head>
<title>External Page Opener Test</title>
<meta charset="UTF-8">
<style>
body {
background-color:cornflowerblue;
color:white;
font-family:Tahoma,Arial,sans-serif;
}
</style>
<script>
window.addEventListener('load', init, false);
function init(event) {
var listings = prompt("Listing numbers:");
if (listings) {
var listingNum = listings.split(" ");
for (i = 0; i < listingNum.length; i++) {
// I used my local desktop and 3 test HTML files,
//each with a button click and handler on them.
var url = "file:///C:/Users/******/Desktop/" + listingNum[i];
var handle = window.open(url, "_blank");
handle.addEventListener('load', extPageLoaded, false);
}
} else {
console.log('No listings were entered.');
}
}
function extPageLoaded(event) {
const TIME_TO_WAIT_IN_MILLISECONDS = 4000;
setTimeout(
function() {
event.target.getElementById('SignInAsMemberLinkHeader').click();
},
TIME_TO_WAIT_IN_MILLISECONDS
);
}
</script>
</head>
<body>
</body>
</html>
Rewriting the question -
I am trying to make a page on which if user leave the page (either to other link/website or closing window/tab) I want to show the onbeforeunload handeler saying we have a great offer for you? and if user choose to leave the page it should do the normal propogation but if he choose to stay on the page I need him to redirect it to offer page redirection is important, no compromise. For testing lets redirect to google.com
I made a program as follows -
var stayonthis = true;
var a;
function load() {
window.onbeforeunload = function(e) {
if(stayonthis){
a = setTimeout('window.location.href="http://google.com";',100);
stayonthis = false;
return "Do you really want to leave now?";
}
else {
clearTimeout(a);
}
};
window.onunload = function(e) {
clearTimeout(a);
};
}
window.onload = load;
but the problem is that if he click on the link to yahoo.com and choose to leave the page he is not going to yahoo but to google instead :(
Help Me !! Thanks in Advance
here is the fiddle code
here how you can test because onbeforeunload does not work on iframe well
This solution works in all cases, using back browser button, setting new url in address bar or use links.
What i have found is that triggering onbeforeunload handler doesn't show the dialog attached to onbeforeunload handler.
In this case (when triggering is needed), use a confirm box to show the user message. This workaround is tested in chrome/firefox and IE (7 to 10)
http://jsfiddle.net/W3vUB/4/show
http://jsfiddle.net/W3vUB/4/
EDIT: set DEMO on codepen, apparently jsFiddle doesn't like this snippet(?!)
BTW, using bing.com due to google not allowing no more content being displayed inside iframe.
http://codepen.io/anon/pen/dYKKbZ
var a, b = false,
c = "http://bing.com";
function triggerEvent(el, type) {
if ((el[type] || false) && typeof el[type] == 'function') {
el[type](el);
}
}
$(function () {
$('a:not([href^=#])').on('click', function (e) {
e.preventDefault();
if (confirm("Do you really want to leave now?")) c = this.href;
triggerEvent(window, 'onbeforeunload');
});
});
window.onbeforeunload = function (e) {
if (b) return;
a = setTimeout(function () {
b = true;
window.location.href = c;
c = "http://bing.com";
console.log(c);
}, 500);
return "Do you really want to leave now?";
}
window.onunload = function () {
clearTimeout(a);
}
It's better to Check it local.
Check out the comments and try this: LIVE DEMO
var linkClick=false;
document.onclick = function(e)
{
linkClick = true;
var elemntTagName = e.target.tagName;
if(elemntTagName=='A')
{
e.target.getAttribute("href");
if(!confirm('Are your sure you want to leave?'))
{
window.location.href = "http://google.com";
console.log("http://google.com");
}
else
{
window.location.href = e.target.getAttribute("href");
console.log(e.target.getAttribute("href"));
}
return false;
}
}
function OnBeforeUnLoad ()
{
return "Are you sure?";
linkClick=false;
window.location.href = "http://google.com";
console.log("http://google.com");
}
And change your html code to this:
<body onbeforeunload="if(linkClick == false) {return OnBeforeUnLoad()}">
try it
</body>
After playing a while with this problem I did the following. It seems to work but it's not very reliable. The biggest issue is that the timed out function needs to bridge a large enough timespan for the browser to make a connection to the url in the link's href attribute.
jsfiddle to demonstrate. I used bing.com instead of google.com because of X-Frame-Options: SAMEORIGIN
var F = function(){}; // empty function
var offerUrl = 'http://bing.com';
var url;
var handler = function(e) {
timeout = setTimeout(function () {
console.log('location.assign');
location.assign(offerUrl);
/*
* This value makes or breaks it.
* You need enough time so the browser can make the connection to
* the clicked links href else it will still redirect to the offer url.
*/
}, 1400);
// important!
window.onbeforeunload = F;
console.info('handler');
return 'Do you wan\'t to leave now?';
};
window.onbeforeunload = handler;
Try the following, (adds a global function that checks the state all the time though).
var redirected=false;
$(window).bind('beforeunload', function(e){
if(redirected)
return;
var orgLoc=window.location.href;
$(window).bind('focus.unloadev',function(e){
if(redirected==true)
return;
$(window).unbind('focus.unloadev');
window.setTimeout(function(){
if(window.location.href!=orgLoc)
return;
console.log('redirect...');
window.location.replace('http://google.com');
},6000);
redirected=true;
});
console.log('before2');
return "okdoky2";
});
$(window).unload(function(e){console.log('unloading...');redirected=true;});
<script>
function endSession() {
// Browser or Broswer tab is closed
// Write code here
alert('Browser or Broswer tab closed');
}
</script>
<body onpagehide="endSession();">
I think you're confused about the progress of events, on before unload the page is still interacting, the return method is like a shortcut for return "confirm()", the return of the confirm however cannot be handled at all, so you can not really investigate the response of the user and decide upon it which way to go, the response is going to be immediately carried out as "yes" leave page, or "no" don't leave page...
Notice that you have already changed the source of the url to Google before you prompt user, this action, cannot be undone... unless maybe, you can setimeout to something like 5 seconds (but then if the user isn't quick enough it won't pick up his answer)
Edit: I've just made it a 5000 time lapse and it always goes to Yahoo! Never picks up the google change at all.