Run mousedown event every 0.2s, until mouse up - javascript

I am trying to consecutively add +1 to the value of a text input field when the user clicks a button.
Simplified, my JQuery code is something like this:
$('#button').on({
mousedown : function () {
var value = $(this).val();
$(this).val(value + 1);
},
mouseup : function () {
//Some other stuff here
}
});
This works every time the user clicks the button.
What I want is if the user keeps the button pressed, the mousedown event to fire every 0.2s until he stops pressing (and than the mouseup event fires).
I figure this should somehow be done with setTimeout() but I would be glad if someone showed me how. Thanks.

Use setInterval and clearInterval:
var interval;
$('#button').on({
mousedown : function () {
var el = $(this);
el.val(parseInt(el.val(), 10) + 1);
interval = window.setInterval(function(){
el.val(parseInt(el.val(), 10) + 1);
}, 200);
},
mouseup : function () {
window.clearInterval(interval);
}
});
However, it's not possible to run as often as every 0.2 ms, I suppose that you mean every 0.2 seconds...

You can use setInterval to repeat the event after the mousedown code
var int = null;
$("#button").mousedown(function() {
// Start the timer on mousedown
int = setInterval(function() {
$("#button").val($("#button").val() + 1);
}, 2);
}).mouseup(function() {
// Stop the timer after mouse up
clearInterval(int);
int = null;
// Other code
});

You can achieve this like that:
$('#button').on({
mousedown: function () {
$(this).data('clicked', true);
var self = this;
var process = function() {
if ($(self).data('clicked')) {
console.log("process...");
setTimeout(process, 200);
}
};
process();
},
mouseup: function () {
$(this).data('clicked', false);
}
});

Related

I want to show an alert to the user after no activity for a specific time without using setTimeout function in jquery, is there a way to tackle this? [duplicate]

Is it possible to detect "idle" time in JavaScript?
My primary use case probably would be to pre-fetch or preload content.
I define idle time as a period of user inactivity or without any CPU usage
Here is a simple script using jQuery that handles mousemove and keypress events.
If the time expires, the page reloads.
<script type="text/javascript">
var idleTime = 0;
$(document).ready(function () {
// Increment the idle time counter every minute.
var idleInterval = setInterval(timerIncrement, 60000); // 1 minute
// Zero the idle timer on mouse movement.
$(this).mousemove(function (e) {
idleTime = 0;
});
$(this).keypress(function (e) {
idleTime = 0;
});
});
function timerIncrement() {
idleTime = idleTime + 1;
if (idleTime > 19) { // 20 minutes
window.location.reload();
}
}
</script>
With vanilla JavaScript:
var inactivityTime = function () {
var time;
window.onload = resetTimer;
// DOM Events
document.onmousemove = resetTimer;
document.onkeydown = resetTimer;
function logout() {
alert("You are now logged out.")
//location.href = 'logout.html'
}
function resetTimer() {
clearTimeout(time);
time = setTimeout(logout, 3000)
// 1000 milliseconds = 1 second
}
};
And initialise the function where you need it (for example: onPageLoad).
window.onload = function() {
inactivityTime();
}
You can add more DOM events if you need to. Most used are:
document.onload = resetTimer;
document.onmousemove = resetTimer;
document.onmousedown = resetTimer; // touchscreen presses
document.ontouchstart = resetTimer;
document.onclick = resetTimer; // touchpad clicks
document.onkeydown = resetTimer; // onkeypress is deprectaed
document.addEventListener('scroll', resetTimer, true); // improved; see comments
Or register desired events using an array
window.addEventListener('load', resetTimer, true);
var events = ['mousedown', 'mousemove', 'keypress', 'scroll', 'touchstart'];
events.forEach(function(name) {
document.addEventListener(name, resetTimer, true);
});
DOM Events list: http://www.w3schools.com/jsref/dom_obj_event.asp
Remember to use window, or document according your needs. Here you can see the differences between them: What is the difference between window, screen, and document in JavaScript?
Code Updated with #frank-conijn and #daxchen improve: window.onscroll will not fire if scrolling is inside a scrollable element, because scroll events don't bubble. In window.addEventListener('scroll', resetTimer, true), the third argument tells the listener to catch the event during the capture phase instead of the bubble phase.
Improving on Equiman's (original) answer:
function idleLogout() {
var t;
window.onload = resetTimer;
window.onmousemove = resetTimer;
window.onmousedown = resetTimer; // catches touchscreen presses as well
window.ontouchstart = resetTimer; // catches touchscreen swipes as well
window.ontouchmove = resetTimer; // required by some devices
window.onclick = resetTimer; // catches touchpad clicks as well
window.onkeydown = resetTimer;
window.addEventListener('scroll', resetTimer, true); // improved; see comments
function yourFunction() {
// your function for too long inactivity goes here
// e.g. window.location.href = 'logout.php';
}
function resetTimer() {
clearTimeout(t);
t = setTimeout(yourFunction, 10000); // time is in milliseconds
}
}
idleLogout();
Apart from the improvements regarding activity detection, and the change from document to window, this script actually calls the function, rather than letting it sit idle by.
It doesn't catch zero CPU usage directly, but that is impossible, because executing a function causes CPU usage. And user inactivity eventually leads to zero CPU usage, so indirectly it does catch zero CPU usage.
I have created a small library that does this:
https://github.com/shawnmclean/Idle.js
Description:
Tiny JavaScript library to report activity of user in the browser
(away, idle, not looking at webpage, in a different tab, etc). that is independent of any
other JavaScript libraries such as jQuery.
Visual Studio users can get it from NuGet by:
Install-Package Idle.js
Here is a rough jQuery implementation of tvanfosson's idea:
$(document).ready(function(){
idleTime = 0;
//Increment the idle time counter every second.
var idleInterval = setInterval(timerIncrement, 1000);
function timerIncrement()
{
idleTime++;
if (idleTime > 2)
{
doPreload();
}
}
//Zero the idle timer on mouse movement.
$(this).mousemove(function(e){
idleTime = 0;
});
function doPreload()
{
//Preload images, etc.
}
})
Similar to Peter J's solution (with a jQuery custom event)...
// Use the jquery-idle-detect.js script below
$(window).on('idle:start', function() {
// Start your prefetch, etc. here...
});
$(window).on('idle:stop', function() {
// Stop your prefetch, etc. here...
});
File jquery-idle-detect.js
(function($, $w) {
// Expose configuration option
// Idle is triggered when no events for 2 seconds
$.idleTimeout = 2000;
// Currently in idle state
var idle = false;
// Handle to idle timer for detection
var idleTimer = null;
// Start the idle timer and bind events on load (not DOM-ready)
$w.on('load', function() {
startIdleTimer();
$w.on('focus resize mousemove keyup', startIdleTimer)
.on('blur', idleStart) // Force idle when in a different tab/window
;
]);
function startIdleTimer() {
clearTimeout(idleTimer); // Clear prior timer
if (idle) $w.trigger('idle:stop'); // If idle, send stop event
idle = false; // Not idle
var timeout = ~~$.idleTimeout; // Option to integer
if (timeout <= 100)
timeout = 100; // Minimum 100 ms
if (timeout > 300000)
timeout = 300000; // Maximum 5 minutes
idleTimer = setTimeout(idleStart, timeout); // New timer
}
function idleStart() {
if (!idle)
$w.trigger('idle:start');
idle = true;
}
}(window.jQuery, window.jQuery(window)))
You can do it more elegantly with Underscore.js and jQuery:
$('body').on("click mousemove keyup", _.debounce(function(){
// do preload here
}, 1200000)) // 20 minutes debounce
My answer was inspired by vijay's answer, but is a shorter, more general solution that I thought I'd share for anyone it might help.
(function () {
var minutes = true; // change to false if you'd rather use seconds
var interval = minutes ? 60000 : 1000;
var IDLE_TIMEOUT = 3; // 3 minutes in this example
var idleCounter = 0;
document.onmousemove = document.onkeypress = function () {
idleCounter = 0;
};
window.setInterval(function () {
if (++idleCounter >= IDLE_TIMEOUT) {
window.location.reload(); // or whatever you want to do
}
}, interval);
}());
As it currently stands, this code will execute immediately and reload your current page after 3 minutes of no mouse movement or key presses.
This utilizes plain vanilla JavaScript and an immediately-invoked function expression to handle idle timeouts in a clean and self-contained manner.
All the previous answers have an always-active mousemove handler. If the handler is jQuery, the additional processing jQuery performs can add up. Especially if the user is using a gaming mouse, as many as 500 events per second can occur.
This solution avoids handling every mousemove event. This result in a small timing error, but which you can adjust to your need.
function setIdleTimeout(millis, onIdle, onUnidle) {
var timeout = 0;
startTimer();
function startTimer() {
timeout = setTimeout(onExpires, millis);
document.addEventListener("mousemove", onActivity);
document.addEventListener("keydown", onActivity);
document.addEventListener("touchstart", onActivity);
}
function onExpires() {
timeout = 0;
onIdle();
}
function onActivity() {
if (timeout) clearTimeout(timeout);
else onUnidle();
//since the mouse is moving, we turn off our event hooks for 1 second
document.removeEventListener("mousemove", onActivity);
document.removeEventListener("keydown", onActivity);
document.removeEventListener("touchstart", onActivity);
setTimeout(startTimer, 1000);
}
}
http://jsfiddle.net/9exz43v2/
I had the same issue and I found a quite good solution.
I used jquery.idle and I only needed to do:
$(document).idle({
onIdle: function(){
alert('You did nothing for 5 seconds');
},
idle: 5000
})
See JsFiddle demo.
(Just for information: see this for back-end event tracking Leads browserload)
If you are targeting a supported browser (Chrome or Firefox as of December 2018) you can experiment with the requestIdleCallback and include the requestIdleCallback shim for unsupported browsers.
You could probably hack something together by detecting mouse movement on the body of the form and updating a global variable with the last movement time. You'd then need to have an interval timer running that periodically checks the last movement time and does something if it has been sufficiently long since the last mouse movement was detected.
I wrote a small ES6 class to detect activity and otherwise fire events on idle timeout. It covers keyboard, mouse and touch, can be activated and deactivated and has a very lean API:
const timer = new IdleTimer(() => alert('idle for 1 minute'), 1000 * 60 * 1);
timer.activate();
It does not depend on jQuery, though you might need to run it through Babel to support older browsers.
https://gist.github.com/4547ef5718fd2d31e5cdcafef0208096
(Partially inspired by the good core logic of Equiman's answer.)
sessionExpiration.js
sessionExpiration.js is lightweight yet effective and customizable. Once implemented, use in just one row:
sessionExpiration(idleMinutes, warningMinutes, logoutUrl);
Affects all tabs of the browser, not just one.
Written in pure JavaScript, with no dependencies. Fully client side.
(If so wanted.) Has warning banner and countdown clock, that is cancelled by user interaction.
Simply include the sessionExpiration.js, and call the function, with arguments [1] number of idle minutes (across all tabs) until user is logged out, [2] number of idle minutes until warning and countdown is displayed, and [3] logout url.
Put the CSS in your stylesheet. Customize it if you like. (Or skip and delete banner if you don't want it.)
If you do want the warning banner however, then you must put an empty div with ID sessExpirDiv on your page (a suggestion is putting it in the footer).
Now the user will be logged out automatically if all tabs have been inactive for the given duration.
Optional: You may provide a fourth argument (URL serverRefresh) to the function, so that a server side session timer is also refreshed when you interact with the page.
This is an example of what it looks like in action, if you don't change the CSS.
Try this code. It works perfectly.
var IDLE_TIMEOUT = 10; //seconds
var _idleSecondsCounter = 0;
document.onclick = function () {
_idleSecondsCounter = 0;
};
document.onmousemove = function () {
_idleSecondsCounter = 0;
};
document.onkeypress = function () {
_idleSecondsCounter = 0;
};
window.setInterval(CheckIdleTime, 1000);
function CheckIdleTime() {
_idleSecondsCounter++;
var oPanel = document.getElementById("SecondsUntilExpire");
if (oPanel)
oPanel.innerHTML = (IDLE_TIMEOUT - _idleSecondsCounter) + "";
if (_idleSecondsCounter >= IDLE_TIMEOUT) {
alert("Time expired!");
document.location.href = "SessionExpired.aspx";
}
}
<script type="text/javascript">
var idleTime = 0;
$(document).ready(function () {
//Increment the idle time counter every minute.
idleInterval = setInterval(timerIncrement, 60000); // 1 minute
//Zero the idle timer on mouse movement.
$('body').mousemove(function (e) {
//alert("mouse moved" + idleTime);
idleTime = 0;
});
$('body').keypress(function (e) {
//alert("keypressed" + idleTime);
idleTime = 0;
});
$('body').click(function() {
//alert("mouse moved" + idleTime);
idleTime = 0;
});
});
function timerIncrement() {
idleTime = idleTime + 1;
if (idleTime > 10) { // 10 minutes
window.location.assign("http://www.google.com");
}
}
</script>
I think this jQuery code is perfect one, though copied and modified from above answers!!
Do not forgot to include the jQuery library in your file!
Pure JavaScript with a properly set reset time and bindings via addEventListener:
(function() {
var t,
timeout = 5000;
function resetTimer() {
console.log("reset: " + new Date().toLocaleString());
if (t) {
window.clearTimeout(t);
}
t = window.setTimeout(logout, timeout);
}
function logout() {
console.log("done: " + new Date().toLocaleString());
}
resetTimer();
//And bind the events to call `resetTimer()`
["click", "mousemove", "keypress"].forEach(function(name) {
console.log(name);
document.addEventListener(name, resetTimer);
});
}());
The problem with all these solutions, although correct, is they are impractical, when taking into account the session timeout valuable set, using PHP, .NET or in the Application.cfc file for ColdFusion developers.
The time set by the above solution needs to sync with the server-side session timeout. If the two do not sync, you can run into problems that will just frustrate and confuse your users.
For example, the server side session timeout might be set to 60 minutes, but the user may believe that he/she is safe, because the JavaScript idle time capture has increased the total amount of time a user can spend on a single page. The user may have spent time filling in a long form, and then goes to submit it. The session timeout might kick in before the form submission is processed.
I tend to just give my users 180 minutes, and then use JavaScript to automatically log the user out. Essentially, using some of the code above, to create a simple timer, but without the capturing mouse event part.
In this way my client side and server-side time syncs perfectly. There is no confusion, if you show the time to the user in your UI, as it reduces. Each time a new page is accessed in the CMS, the server side session and JavaScript timer are reset. Simple and elegant. If a user stays on a single page for more than 180 minutes, I figure there is something wrong with the page, in the first place.
You can use the below mentioned solution
var idleTime;
$(document).ready(function () {
reloadPage();
$('html').bind('mousemove click mouseup mousedown keydown keypress keyup submit change mouseenter scroll resize dblclick', function () {
clearTimeout(idleTime);
reloadPage();
});
});
function reloadPage() {
clearTimeout(idleTime);
idleTime = setTimeout(function () {
location.reload();
}, 3000);
}
I wrote a simple jQuery plugin that will do what you are looking for.
https://github.com/afklondon/jquery.inactivity
$(document).inactivity( {
interval: 1000, // the timeout until the inactivity event fire [default: 3000]
mouse: true, // listen for mouse inactivity [default: true]
keyboard: false, // listen for keyboard inactivity [default: true]
touch: false, // listen for touch inactivity [default: true]
customEvents: "customEventName", // listen for custom events [default: ""]
triggerAll: true, // if set to false only the first "activity" event will be fired [default: false]
});
The script will listen for mouse, keyboard, touch and other custom events inactivity (idle) and fire global "activity" and "inactivity" events.
I have tested this code working file:
var timeout = null;
var timee = '4000'; // default time for session time out.
$(document).bind('click keyup mousemove', function(event) {
if (timeout !== null) {
clearTimeout(timeout);
}
timeout = setTimeout(function() {
timeout = null;
console.log('Document Idle since '+timee+' ms');
alert("idle window");
}, timee);
});
Is it possible to have a function run every 10 seconds, and have that check a "counter" variable? If that's possible, you can have an on mouseover for the page, can you not?
If so, use the mouseover event to reset the "counter" variable. If your function is called, and the counter is above the range that you pre-determine, then do your action.
Here is the best solution I have found:
Fire Event When User is Idle
Here is the JavaScript:
idleTimer = null;
idleState = false;
idleWait = 2000;
(function ($) {
$(document).ready(function () {
$('*').bind('mousemove keydown scroll', function () {
clearTimeout(idleTimer);
if (idleState == true) {
// Reactivated event
$("body").append("<p>Welcome Back.</p>");
}
idleState = false;
idleTimer = setTimeout(function () {
// Idle Event
$("body").append("<p>You've been idle for " + idleWait/1000 + " seconds.</p>");
idleState = true; }, idleWait);
});
$("body").trigger("mousemove");
});
}) (jQuery)
I use this approach, since you don't need to constantly reset the time when an event fires. Instead, we just record the time, and this generates the idle start point.
function idle(WAIT_FOR_MINS, cb_isIdle) {
var self = this,
idle,
ms = (WAIT_FOR_MINS || 1) * 60000,
lastDigest = new Date(),
watch;
//document.onmousemove = digest;
document.onkeypress = digest;
document.onclick = digest;
function digest() {
lastDigest = new Date();
}
// 1000 milisec = 1 sec
watch = setInterval(function() {
if (new Date() - lastDigest > ms && cb_isIdel) {
clearInterval(watch);
cb_isIdle();
}
}, 1000*60);
},
Based on the inputs provided by equiman:
class _Scheduler {
timeoutIDs;
constructor() {
this.timeoutIDs = new Map();
}
addCallback = (callback, timeLapseMS, autoRemove) => {
if (!this.timeoutIDs.has(timeLapseMS + callback)) {
let timeoutID = setTimeout(callback, timeLapseMS);
this.timeoutIDs.set(timeLapseMS + callback, timeoutID);
}
if (autoRemove !== false) {
setTimeout(
this.removeIdleTimeCallback, // Remove
10000 + timeLapseMS, // 10 secs after
callback, // the callback
timeLapseMS, // is invoked.
);
}
};
removeCallback = (callback, timeLapseMS) => {
let timeoutID = this.timeoutIDs.get(timeLapseMS + callback);
if (timeoutID) {
clearTimeout(timeoutID);
this.timeoutIDs.delete(timeLapseMS + callback);
}
};
}
class _IdleTimeScheduler extends _Scheduler {
events = [
'load',
'mousedown',
'mousemove',
'keydown',
'keyup',
'input',
'scroll',
'touchstart',
'touchend',
'touchcancel',
'touchmove',
];
callbacks;
constructor() {
super();
this.events.forEach(name => {
document.addEventListener(name, this.resetTimer, true);
});
this.callbacks = new Map();
}
addIdleTimeCallback = (callback, timeLapseMS) => {
this.addCallback(callback, timeLapseMS, false);
let callbacksArr = this.callbacks.get(timeLapseMS);
if (!callbacksArr) {
this.callbacks.set(timeLapseMS, [callback]);
} else {
if (!callbacksArr.includes(callback)) {
callbacksArr.push(callback);
}
}
};
removeIdleTimeCallback = (callback, timeLapseMS) => {
this.removeCallback(callback, timeLapseMS);
let callbacksArr = this.callbacks.get(timeLapseMS);
if (callbacksArr) {
let index = callbacksArr.indexOf(callback);
if (index !== -1) {
callbacksArr.splice(index, 1);
}
}
};
resetTimer = () => {
for (let [timeLapseMS, callbacksArr] of this.callbacks) {
callbacksArr.forEach(callback => {
// Clear the previous IDs
let timeoutID = this.timeoutIDs.get(timeLapseMS + callback);
clearTimeout(timeoutID);
// Create new timeout IDs.
timeoutID = setTimeout(callback, timeLapseMS);
this.timeoutIDs.set(timeLapseMS + callback, timeoutID);
});
}
};
}
export const Scheduler = new _Scheduler();
export const IdleTimeScheduler = new _IdleTimeScheduler();
As simple as it can get, detect when the mouse moves only:
var idle = false;
document.querySelector('body').addEventListener('mousemove', function(e) {
if(idle!=false)
idle = false;
});
var idleI = setInterval(function()
{
if(idle == 'inactive')
{
return;
}
if(idle == true)
{
idleFunction();
idle = 'inactive';
return;
}
idle = true;
}, 30000); // half the expected time. Idle will trigger after 60 s in this case.
function idleFuntion()
{
console.log('user is idle');
}
Here is an AngularJS service for accomplishing in Angular.
/* Tracks now long a user has been idle. secondsIdle can be polled
at any time to know how long user has been idle. */
fuelServices.factory('idleChecker',['$interval', function($interval){
var self = {
secondsIdle: 0,
init: function(){
$(document).mousemove(function (e) {
self.secondsIdle = 0;
});
$(document).keypress(function (e) {
self.secondsIdle = 0;
});
$interval(function(){
self.secondsIdle += 1;
}, 1000)
}
}
return self;
}]);
Keep in mind this idle checker will run for all routes, so it should be initialized in .run() on load of the angular app. Then you can use idleChecker.secondsIdle inside each route.
myApp.run(['idleChecker',function(idleChecker){
idleChecker.init();
}]);
Surely you want to know about window.requestIdleCallback(), which queues a function to be called during a browser's idle periods.
You can see an elegant usage of this API in the Quicklink repo.
const requestIdleCallback = window.requestIdleCallback ||
function (cb) {
const start = Date.now();
return setTimeout(function () {
cb({
didTimeout: false,
timeRemaining: function () {
return Math.max(0, 50 - (Date.now() - start));
},
});
}, 1);
};
The meaning of the code above is: if the browser supports requestIdleCallback (check the compatibility), uses it. If is not supported, uses a setTimeout(()=> {}, 1) as fallback, which should queue the function to be called at the end of the event loop.
Then you can use it like this:
requestIdleCallback(() => {...}, {
timeout: 2000
});
The second parameter is optional, you might want to set a timeout if you want to make sure the function is executed.
You could probably detect inactivity on your web page using the mousemove tricks listed, but that won't tell you that the user isn't on another page in another window or tab, or that the user is in Word or Photoshop, or WoW and just isn't looking at your page at this time.
Generally, I'd just do the prefetch and rely on the client's multi-tasking. If you really need this functionality, you do something with an ActiveX control in Windows, but it's ugly at best.
Debounce is actually a great idea! Here is a version for jQuery-free projects:
const derivedLogout = createDerivedLogout(30);
derivedLogout(); // It could happen that the user is too idle)
window.addEventListener('click', derivedLogout, false);
window.addEventListener('mousemove', derivedLogout, false);
window.addEventListener('keyup', derivedLogout, false);
function createDerivedLogout (sessionTimeoutInMinutes) {
return _.debounce( () => {
window.location = this.logoutUrl;
}, sessionTimeoutInMinutes * 60 * 1000 )
}

Continue function until mouse is released

I want to be able to run the below function continuously while the mouse is down. At the moment the function excecutes once per click. I want to be able to continue running the function while mousedown and stop when the mouse is released.
$('#md').mousedown(function(e){
var pCords = e.pageY +e.pageY;
var max = $(document).height()+$(document).width();
var dg = 2*( pCords / max );
$('#div').css({ 'transform':'rotate('+dg+'deg) '});
});
This issue has been addressed in: jQuery continuous mousedown
It will involve setting up a flag that you can set to true when the first mousedown event occurs, and calling a function that only finishes once the flag is set back to false when the mouseup event occurs.
Easy way to do with time delay between execution of event handler:
var timerId = 0;
$('#md').mousedown(function(e){
timerId = setInterval(function() {
var pCords = e.pageY +e.pageY;
var max = $(document).height()+$(document).width();
var dg = 2*( pCords / max );
$('#div').css({ 'transform':'rotate('+dg+'deg) '});
}, 20); // specify the required time delay here
});
$('#md').mouseup(function(e){
clearInterval(timerId);
});
You can do it using a simple semaphore. Here's an example:
var lock = true;
$('#md').mousedown(function() {
lock = false;
setTimeout(function() {
while(!lock) {
// Do your stuff here
}
}, 0);
});
$(document).mouseup(function() {
lock = true;
});
I hope this does the trick.
The setTimeout function detaches the execution of the function and creates an asynchronous process - this makes your code non-blocking.
I'm sure there are more sophisticated ways to solve this problem. It's just that I haven't had my coffee yet. :)
like this? making a global boolean variable to track if mouse is up, then looping your function while mouse is down on that element.
var ismouseup = false;
$(document).ready(function(){
$('#md').mousedown(function(e){
ismouseup = false;
while(!ismouseup)
{
//do your thing
}
});
$('#md').mouseup(function(e){
ismouseup = true;
}
});
--edit: set ismouseup to true when mouseup. sorry.
You can use setTimeout. This will run every 1 sec when mousedown
$('#md').on({
mousedown: function () {
$(this).data('clicked', true);
var process = function() {
if ($(this).data('clicked')) {
// Do your stuff
setTimeout(process, 100);
}
};
process();
},
mouseup: function () {
$(this).data('clicked', false);
}
});
As an option you can set the handler for mousemove in mousedown and remove in mouseup as in code
function movehandler(e) {
var pCords = e.pageY + e.pageY;
var max = $('#md').height();
var dg = 20 * (pCords / max);
$('#md').css({
'transform': 'rotate(' + dg + 'deg) '
});
}
$('#md').mousedown(function (e) {
$('body').on('mousemove', movehandler);
});
$('#md').mouseup(function (e) {
$('body').off('mousemove');
});
$('body').mouseleave(function (e) {
$('body').off('mousemove');
});
Jsfiffle Example is not ideally written but you can get the idea
EDIT: Note that $('body').on('mousemove', might not be sufficient dependent on your markup.

Simulating Spinner Number with mousedown

I made a control (numeric spinner up and down), to work in a table:
JSFIDDLE: http://jsfiddle.net/Leandro1981/wn8vd/1/
and I want simulate the "mousedown, increment while mouse button is helding" but I can't do it. I tried to mix it with the following and functional script:
JSFIDDLE: http://jsfiddle.net/Leandro1981/kKW85/
but I couldn't make it.
My last attempt here:
http://jsfiddle.net/Leandro1981/S8Zt9/1/
Maybe the wrong is the
timeout = setInterval(function () {
But I couldn't figure out. I'm using bootstrap 3, so I can't use some JQuery UI plugins...
Any help will be preciated!
Please comment below if you have any question, comment or anything to improve this question, and sorry for my english :)
Please be free to use my code/control in any way.
Thanks and kind regards
Write a factory to set up each control so you get a closure over the variables, now it's just a matter of being able to make it work given the relevant elements. For this, you'll need to
Listen for mousedown on the up and down nodes to set off the changes
Start a timeout loop to keep doing your change
Listen for mouseup on window to ensure you cancel the timeout loop (you may also want to listen for mouseout/loss of focus)
So all together,
function spinFactory(node, up, down) { // I wrote this vanilla :D
var spinning, delta;
window.addEventListener('mouseup', stopSpin);
function spin() {
node.value = +node.value + delta;
spinning = setTimeout(spin, 500);
}
function stopSpin() { // maybe also invoke this on mouseout/loss of focus
window.clearTimeout(spinning);
delta = 0;
}
up.addEventListener('mousedown', function spinUp() {
delta = 1;
spin();
});
down.addEventListener('mousedown', function spinDown() {
delta = -1;
spin();
});
}
// apply to your control, used a bit of jQuery to make life easier
$('.PNET-spinner').each(function () {
spinFactory(
this.getElementsByTagName('input')[0],
$(this).find('.btn:first-of-type')[0],
$(this).find('.btn:last-of-type')[0]
);
});
DEMO
I have updated the Fiddle here ... Please check this and it might helps you..
Script
$('.PNET-spinner .btn:first-of-type').on('mousedown', function (e) {
var timer, proxy = this;
timer = setInterval(function () {
increment(proxy);
}, 200);
$(document).one("mouseup", function () {
increment(proxy);
if (timer) clearInterval(timer);
});
});
$('.PNET-spinner .btn:last-of-type').on('mousedown', function () {
var timer, proxy = this;
timer = setInterval(function () {
decrement(proxy);
}, 200);
$(document).one("mouseup", function () {
decrement(proxy);
if (timer) clearInterval(timer);
});
});
function increment(proxy) {
var numupdown = $('.PNET-spinner input', $(proxy).closest("tr"));
var inputValue = parseInt($(numupdown).val(), 10);
inputValue++;
$(numupdown).val(inputValue);
}
function decrement(proxy) {
var numupdown = $('.PNET-spinner input', $(proxy).closest("tr"));
var inputValue = parseInt($(numupdown).val(), 10);
if (inputValue > 1) {
inputValue--;
$(numupdown).val(inputValue);
}
}
You simply need to take care of two things. First, your function to increment and decrement the value in the textbox should be called again and again till user do mouseout or mouseup. Second, make surethis has the right value in var numupdown = $('.PNET-spinner input', $(this).closest("tr"));
Following code shows how to do it for the increment button. Similar thing, you can implement for decrement button.
var timeout;
var inc = function () {
var myThis = this;
var numupdown = $('.PNET-spinner input', $(this).closest("tr"));
var inputValue = parseInt($(numupdown).val(), 10);
inputValue++;
console.log(inputValue);
$(numupdown).val(inputValue);
clearTimeout(timeout);
timeout = setTimeout(function(){
//http://stackoverflow.com/questions/3630054/how-do-i-pass-the-this-context-to-a-function
inc.apply(myThis, arguments);
}, 1000);
};
var incStop = function(){
clearTimeout(timeout);
}
$('.PNET-spinner .btn:first-of-type').on('mousedown', inc);
$('.PNET-spinner .btn:first-of-type').on('mouseup', incStop);
$('.PNET-spinner .btn:first-of-type').on('mouseout', incStop);
Check this DEMO here.

A Function to Check if the Mouse is Still Hovering an Element Every 10 Milliseconds (and run a function if it is)

I was wondering if there is a function to be run after an element (e.g. div class="myiv") is hovered and check every X milliseconds if it's still hovered, and if it is, run another function.
EDIT: This did the trick for me:
http://jsfiddle.net/z8yaB/
For most purposes in simple interfaces, you may use jquery's hover function and simply store in a boolean somewhere if the mouse is hover. And then you may use a simple setInterval loop to check every ms this state. You yet could see in the first comment this answer in the linked duplicate (edit : and now in the other answers here).
But there are cases, especially when you have objects moving "between" the mouse and your object when hover generate false alarms.
For those cases, I made this function that checks if an event is really hover an element when jquery calls my handler :
var bubbling = {};
bubbling.eventIsOver = function(event, o) {
if ((!o) || o==null) return false;
var pos = o.offset();
var ex = event.pageX;
var ey = event.pageY;
if (
ex>=pos.left
&& ex<=pos.left+o.width()
&& ey>=pos.top
&& ey<=pos.top+o.height()
) {
return true;
}
return false;
};
I use this function to check that the mouse really leaved when I received the mouseout event :
$('body').delegate(' myselector ', 'mouseenter', function(event) {
bubbling.bubbleTarget = $(this);
// store somewhere that the mouse is in the object
}).live('mouseout', function(event) {
if (bubbling.eventIsOver(event, bubbling.bubbleTarget)) return;
// store somewhere that the mouse leaved the object
});
You can use variablename = setInterval(...) to initiate a function repeatedly on mouseover, and clearInterval(variablename) to stop it on mouseout.
http://jsfiddle.net/XE8sK/
var marker;
$('#test').on('mouseover', function() {
marker = setInterval(function() {
$('#siren').show().fadeOut('slow');
}, 500);
}).on('mouseout', function() {
clearInterval(marker);
});​
jQuery has the hover() method which gives you this functionality out of the box:
$('.myiv').hover(
function () {
// the element is hovered over... do stuff
},
function () {
// the element is no longer hovered... do stuff
}
);
To check every x milliseconds if the element is still hovered and respond adjust to the following:
var x = 10; // number of milliseconds
var intervalId;
$('.myiv').hover(
function () {
// the element is hovered over... do stuff
intervalId = window.setInterval(someFunction, x);
},
function () {
// the element is no longer hovered... do stuff
window.clearInterval(intervalId);
}
);
DEMO - http://jsfiddle.net/z8yaB/
var interval = 0;
$('.myiv').hover(
function () {
interval = setInterval(function(){
console.log('still hovering');
},1000);
},
function () {
clearInterval(interval);
}
);

How to detect idle time in JavaScript

Is it possible to detect "idle" time in JavaScript?
My primary use case probably would be to pre-fetch or preload content.
I define idle time as a period of user inactivity or without any CPU usage
Here is a simple script using jQuery that handles mousemove and keypress events.
If the time expires, the page reloads.
<script type="text/javascript">
var idleTime = 0;
$(document).ready(function () {
// Increment the idle time counter every minute.
var idleInterval = setInterval(timerIncrement, 60000); // 1 minute
// Zero the idle timer on mouse movement.
$(this).mousemove(function (e) {
idleTime = 0;
});
$(this).keypress(function (e) {
idleTime = 0;
});
});
function timerIncrement() {
idleTime = idleTime + 1;
if (idleTime > 19) { // 20 minutes
window.location.reload();
}
}
</script>
With vanilla JavaScript:
var inactivityTime = function () {
var time;
window.onload = resetTimer;
// DOM Events
document.onmousemove = resetTimer;
document.onkeydown = resetTimer;
function logout() {
alert("You are now logged out.")
//location.href = 'logout.html'
}
function resetTimer() {
clearTimeout(time);
time = setTimeout(logout, 3000)
// 1000 milliseconds = 1 second
}
};
And initialise the function where you need it (for example: onPageLoad).
window.onload = function() {
inactivityTime();
}
You can add more DOM events if you need to. Most used are:
document.onload = resetTimer;
document.onmousemove = resetTimer;
document.onmousedown = resetTimer; // touchscreen presses
document.ontouchstart = resetTimer;
document.onclick = resetTimer; // touchpad clicks
document.onkeydown = resetTimer; // onkeypress is deprectaed
document.addEventListener('scroll', resetTimer, true); // improved; see comments
Or register desired events using an array
window.addEventListener('load', resetTimer, true);
var events = ['mousedown', 'mousemove', 'keypress', 'scroll', 'touchstart'];
events.forEach(function(name) {
document.addEventListener(name, resetTimer, true);
});
DOM Events list: http://www.w3schools.com/jsref/dom_obj_event.asp
Remember to use window, or document according your needs. Here you can see the differences between them: What is the difference between window, screen, and document in JavaScript?
Code Updated with #frank-conijn and #daxchen improve: window.onscroll will not fire if scrolling is inside a scrollable element, because scroll events don't bubble. In window.addEventListener('scroll', resetTimer, true), the third argument tells the listener to catch the event during the capture phase instead of the bubble phase.
Improving on Equiman's (original) answer:
function idleLogout() {
var t;
window.onload = resetTimer;
window.onmousemove = resetTimer;
window.onmousedown = resetTimer; // catches touchscreen presses as well
window.ontouchstart = resetTimer; // catches touchscreen swipes as well
window.ontouchmove = resetTimer; // required by some devices
window.onclick = resetTimer; // catches touchpad clicks as well
window.onkeydown = resetTimer;
window.addEventListener('scroll', resetTimer, true); // improved; see comments
function yourFunction() {
// your function for too long inactivity goes here
// e.g. window.location.href = 'logout.php';
}
function resetTimer() {
clearTimeout(t);
t = setTimeout(yourFunction, 10000); // time is in milliseconds
}
}
idleLogout();
Apart from the improvements regarding activity detection, and the change from document to window, this script actually calls the function, rather than letting it sit idle by.
It doesn't catch zero CPU usage directly, but that is impossible, because executing a function causes CPU usage. And user inactivity eventually leads to zero CPU usage, so indirectly it does catch zero CPU usage.
I have created a small library that does this:
https://github.com/shawnmclean/Idle.js
Description:
Tiny JavaScript library to report activity of user in the browser
(away, idle, not looking at webpage, in a different tab, etc). that is independent of any
other JavaScript libraries such as jQuery.
Visual Studio users can get it from NuGet by:
Install-Package Idle.js
Here is a rough jQuery implementation of tvanfosson's idea:
$(document).ready(function(){
idleTime = 0;
//Increment the idle time counter every second.
var idleInterval = setInterval(timerIncrement, 1000);
function timerIncrement()
{
idleTime++;
if (idleTime > 2)
{
doPreload();
}
}
//Zero the idle timer on mouse movement.
$(this).mousemove(function(e){
idleTime = 0;
});
function doPreload()
{
//Preload images, etc.
}
})
Similar to Peter J's solution (with a jQuery custom event)...
// Use the jquery-idle-detect.js script below
$(window).on('idle:start', function() {
// Start your prefetch, etc. here...
});
$(window).on('idle:stop', function() {
// Stop your prefetch, etc. here...
});
File jquery-idle-detect.js
(function($, $w) {
// Expose configuration option
// Idle is triggered when no events for 2 seconds
$.idleTimeout = 2000;
// Currently in idle state
var idle = false;
// Handle to idle timer for detection
var idleTimer = null;
// Start the idle timer and bind events on load (not DOM-ready)
$w.on('load', function() {
startIdleTimer();
$w.on('focus resize mousemove keyup', startIdleTimer)
.on('blur', idleStart) // Force idle when in a different tab/window
;
]);
function startIdleTimer() {
clearTimeout(idleTimer); // Clear prior timer
if (idle) $w.trigger('idle:stop'); // If idle, send stop event
idle = false; // Not idle
var timeout = ~~$.idleTimeout; // Option to integer
if (timeout <= 100)
timeout = 100; // Minimum 100 ms
if (timeout > 300000)
timeout = 300000; // Maximum 5 minutes
idleTimer = setTimeout(idleStart, timeout); // New timer
}
function idleStart() {
if (!idle)
$w.trigger('idle:start');
idle = true;
}
}(window.jQuery, window.jQuery(window)))
You can do it more elegantly with Underscore.js and jQuery:
$('body').on("click mousemove keyup", _.debounce(function(){
// do preload here
}, 1200000)) // 20 minutes debounce
My answer was inspired by vijay's answer, but is a shorter, more general solution that I thought I'd share for anyone it might help.
(function () {
var minutes = true; // change to false if you'd rather use seconds
var interval = minutes ? 60000 : 1000;
var IDLE_TIMEOUT = 3; // 3 minutes in this example
var idleCounter = 0;
document.onmousemove = document.onkeypress = function () {
idleCounter = 0;
};
window.setInterval(function () {
if (++idleCounter >= IDLE_TIMEOUT) {
window.location.reload(); // or whatever you want to do
}
}, interval);
}());
As it currently stands, this code will execute immediately and reload your current page after 3 minutes of no mouse movement or key presses.
This utilizes plain vanilla JavaScript and an immediately-invoked function expression to handle idle timeouts in a clean and self-contained manner.
All the previous answers have an always-active mousemove handler. If the handler is jQuery, the additional processing jQuery performs can add up. Especially if the user is using a gaming mouse, as many as 500 events per second can occur.
This solution avoids handling every mousemove event. This result in a small timing error, but which you can adjust to your need.
function setIdleTimeout(millis, onIdle, onUnidle) {
var timeout = 0;
startTimer();
function startTimer() {
timeout = setTimeout(onExpires, millis);
document.addEventListener("mousemove", onActivity);
document.addEventListener("keydown", onActivity);
document.addEventListener("touchstart", onActivity);
}
function onExpires() {
timeout = 0;
onIdle();
}
function onActivity() {
if (timeout) clearTimeout(timeout);
else onUnidle();
//since the mouse is moving, we turn off our event hooks for 1 second
document.removeEventListener("mousemove", onActivity);
document.removeEventListener("keydown", onActivity);
document.removeEventListener("touchstart", onActivity);
setTimeout(startTimer, 1000);
}
}
http://jsfiddle.net/9exz43v2/
I had the same issue and I found a quite good solution.
I used jquery.idle and I only needed to do:
$(document).idle({
onIdle: function(){
alert('You did nothing for 5 seconds');
},
idle: 5000
})
See JsFiddle demo.
(Just for information: see this for back-end event tracking Leads browserload)
If you are targeting a supported browser (Chrome or Firefox as of December 2018) you can experiment with the requestIdleCallback and include the requestIdleCallback shim for unsupported browsers.
You could probably hack something together by detecting mouse movement on the body of the form and updating a global variable with the last movement time. You'd then need to have an interval timer running that periodically checks the last movement time and does something if it has been sufficiently long since the last mouse movement was detected.
I wrote a small ES6 class to detect activity and otherwise fire events on idle timeout. It covers keyboard, mouse and touch, can be activated and deactivated and has a very lean API:
const timer = new IdleTimer(() => alert('idle for 1 minute'), 1000 * 60 * 1);
timer.activate();
It does not depend on jQuery, though you might need to run it through Babel to support older browsers.
https://gist.github.com/4547ef5718fd2d31e5cdcafef0208096
(Partially inspired by the good core logic of Equiman's answer.)
sessionExpiration.js
sessionExpiration.js is lightweight yet effective and customizable. Once implemented, use in just one row:
sessionExpiration(idleMinutes, warningMinutes, logoutUrl);
Affects all tabs of the browser, not just one.
Written in pure JavaScript, with no dependencies. Fully client side.
(If so wanted.) Has warning banner and countdown clock, that is cancelled by user interaction.
Simply include the sessionExpiration.js, and call the function, with arguments [1] number of idle minutes (across all tabs) until user is logged out, [2] number of idle minutes until warning and countdown is displayed, and [3] logout url.
Put the CSS in your stylesheet. Customize it if you like. (Or skip and delete banner if you don't want it.)
If you do want the warning banner however, then you must put an empty div with ID sessExpirDiv on your page (a suggestion is putting it in the footer).
Now the user will be logged out automatically if all tabs have been inactive for the given duration.
Optional: You may provide a fourth argument (URL serverRefresh) to the function, so that a server side session timer is also refreshed when you interact with the page.
This is an example of what it looks like in action, if you don't change the CSS.
Try this code. It works perfectly.
var IDLE_TIMEOUT = 10; //seconds
var _idleSecondsCounter = 0;
document.onclick = function () {
_idleSecondsCounter = 0;
};
document.onmousemove = function () {
_idleSecondsCounter = 0;
};
document.onkeypress = function () {
_idleSecondsCounter = 0;
};
window.setInterval(CheckIdleTime, 1000);
function CheckIdleTime() {
_idleSecondsCounter++;
var oPanel = document.getElementById("SecondsUntilExpire");
if (oPanel)
oPanel.innerHTML = (IDLE_TIMEOUT - _idleSecondsCounter) + "";
if (_idleSecondsCounter >= IDLE_TIMEOUT) {
alert("Time expired!");
document.location.href = "SessionExpired.aspx";
}
}
<script type="text/javascript">
var idleTime = 0;
$(document).ready(function () {
//Increment the idle time counter every minute.
idleInterval = setInterval(timerIncrement, 60000); // 1 minute
//Zero the idle timer on mouse movement.
$('body').mousemove(function (e) {
//alert("mouse moved" + idleTime);
idleTime = 0;
});
$('body').keypress(function (e) {
//alert("keypressed" + idleTime);
idleTime = 0;
});
$('body').click(function() {
//alert("mouse moved" + idleTime);
idleTime = 0;
});
});
function timerIncrement() {
idleTime = idleTime + 1;
if (idleTime > 10) { // 10 minutes
window.location.assign("http://www.google.com");
}
}
</script>
I think this jQuery code is perfect one, though copied and modified from above answers!!
Do not forgot to include the jQuery library in your file!
Pure JavaScript with a properly set reset time and bindings via addEventListener:
(function() {
var t,
timeout = 5000;
function resetTimer() {
console.log("reset: " + new Date().toLocaleString());
if (t) {
window.clearTimeout(t);
}
t = window.setTimeout(logout, timeout);
}
function logout() {
console.log("done: " + new Date().toLocaleString());
}
resetTimer();
//And bind the events to call `resetTimer()`
["click", "mousemove", "keypress"].forEach(function(name) {
console.log(name);
document.addEventListener(name, resetTimer);
});
}());
The problem with all these solutions, although correct, is they are impractical, when taking into account the session timeout valuable set, using PHP, .NET or in the Application.cfc file for ColdFusion developers.
The time set by the above solution needs to sync with the server-side session timeout. If the two do not sync, you can run into problems that will just frustrate and confuse your users.
For example, the server side session timeout might be set to 60 minutes, but the user may believe that he/she is safe, because the JavaScript idle time capture has increased the total amount of time a user can spend on a single page. The user may have spent time filling in a long form, and then goes to submit it. The session timeout might kick in before the form submission is processed.
I tend to just give my users 180 minutes, and then use JavaScript to automatically log the user out. Essentially, using some of the code above, to create a simple timer, but without the capturing mouse event part.
In this way my client side and server-side time syncs perfectly. There is no confusion, if you show the time to the user in your UI, as it reduces. Each time a new page is accessed in the CMS, the server side session and JavaScript timer are reset. Simple and elegant. If a user stays on a single page for more than 180 minutes, I figure there is something wrong with the page, in the first place.
You can use the below mentioned solution
var idleTime;
$(document).ready(function () {
reloadPage();
$('html').bind('mousemove click mouseup mousedown keydown keypress keyup submit change mouseenter scroll resize dblclick', function () {
clearTimeout(idleTime);
reloadPage();
});
});
function reloadPage() {
clearTimeout(idleTime);
idleTime = setTimeout(function () {
location.reload();
}, 3000);
}
I wrote a simple jQuery plugin that will do what you are looking for.
https://github.com/afklondon/jquery.inactivity
$(document).inactivity( {
interval: 1000, // the timeout until the inactivity event fire [default: 3000]
mouse: true, // listen for mouse inactivity [default: true]
keyboard: false, // listen for keyboard inactivity [default: true]
touch: false, // listen for touch inactivity [default: true]
customEvents: "customEventName", // listen for custom events [default: ""]
triggerAll: true, // if set to false only the first "activity" event will be fired [default: false]
});
The script will listen for mouse, keyboard, touch and other custom events inactivity (idle) and fire global "activity" and "inactivity" events.
I have tested this code working file:
var timeout = null;
var timee = '4000'; // default time for session time out.
$(document).bind('click keyup mousemove', function(event) {
if (timeout !== null) {
clearTimeout(timeout);
}
timeout = setTimeout(function() {
timeout = null;
console.log('Document Idle since '+timee+' ms');
alert("idle window");
}, timee);
});
Is it possible to have a function run every 10 seconds, and have that check a "counter" variable? If that's possible, you can have an on mouseover for the page, can you not?
If so, use the mouseover event to reset the "counter" variable. If your function is called, and the counter is above the range that you pre-determine, then do your action.
Here is the best solution I have found:
Fire Event When User is Idle
Here is the JavaScript:
idleTimer = null;
idleState = false;
idleWait = 2000;
(function ($) {
$(document).ready(function () {
$('*').bind('mousemove keydown scroll', function () {
clearTimeout(idleTimer);
if (idleState == true) {
// Reactivated event
$("body").append("<p>Welcome Back.</p>");
}
idleState = false;
idleTimer = setTimeout(function () {
// Idle Event
$("body").append("<p>You've been idle for " + idleWait/1000 + " seconds.</p>");
idleState = true; }, idleWait);
});
$("body").trigger("mousemove");
});
}) (jQuery)
I use this approach, since you don't need to constantly reset the time when an event fires. Instead, we just record the time, and this generates the idle start point.
function idle(WAIT_FOR_MINS, cb_isIdle) {
var self = this,
idle,
ms = (WAIT_FOR_MINS || 1) * 60000,
lastDigest = new Date(),
watch;
//document.onmousemove = digest;
document.onkeypress = digest;
document.onclick = digest;
function digest() {
lastDigest = new Date();
}
// 1000 milisec = 1 sec
watch = setInterval(function() {
if (new Date() - lastDigest > ms && cb_isIdel) {
clearInterval(watch);
cb_isIdle();
}
}, 1000*60);
},
Based on the inputs provided by equiman:
class _Scheduler {
timeoutIDs;
constructor() {
this.timeoutIDs = new Map();
}
addCallback = (callback, timeLapseMS, autoRemove) => {
if (!this.timeoutIDs.has(timeLapseMS + callback)) {
let timeoutID = setTimeout(callback, timeLapseMS);
this.timeoutIDs.set(timeLapseMS + callback, timeoutID);
}
if (autoRemove !== false) {
setTimeout(
this.removeIdleTimeCallback, // Remove
10000 + timeLapseMS, // 10 secs after
callback, // the callback
timeLapseMS, // is invoked.
);
}
};
removeCallback = (callback, timeLapseMS) => {
let timeoutID = this.timeoutIDs.get(timeLapseMS + callback);
if (timeoutID) {
clearTimeout(timeoutID);
this.timeoutIDs.delete(timeLapseMS + callback);
}
};
}
class _IdleTimeScheduler extends _Scheduler {
events = [
'load',
'mousedown',
'mousemove',
'keydown',
'keyup',
'input',
'scroll',
'touchstart',
'touchend',
'touchcancel',
'touchmove',
];
callbacks;
constructor() {
super();
this.events.forEach(name => {
document.addEventListener(name, this.resetTimer, true);
});
this.callbacks = new Map();
}
addIdleTimeCallback = (callback, timeLapseMS) => {
this.addCallback(callback, timeLapseMS, false);
let callbacksArr = this.callbacks.get(timeLapseMS);
if (!callbacksArr) {
this.callbacks.set(timeLapseMS, [callback]);
} else {
if (!callbacksArr.includes(callback)) {
callbacksArr.push(callback);
}
}
};
removeIdleTimeCallback = (callback, timeLapseMS) => {
this.removeCallback(callback, timeLapseMS);
let callbacksArr = this.callbacks.get(timeLapseMS);
if (callbacksArr) {
let index = callbacksArr.indexOf(callback);
if (index !== -1) {
callbacksArr.splice(index, 1);
}
}
};
resetTimer = () => {
for (let [timeLapseMS, callbacksArr] of this.callbacks) {
callbacksArr.forEach(callback => {
// Clear the previous IDs
let timeoutID = this.timeoutIDs.get(timeLapseMS + callback);
clearTimeout(timeoutID);
// Create new timeout IDs.
timeoutID = setTimeout(callback, timeLapseMS);
this.timeoutIDs.set(timeLapseMS + callback, timeoutID);
});
}
};
}
export const Scheduler = new _Scheduler();
export const IdleTimeScheduler = new _IdleTimeScheduler();
As simple as it can get, detect when the mouse moves only:
var idle = false;
document.querySelector('body').addEventListener('mousemove', function(e) {
if(idle!=false)
idle = false;
});
var idleI = setInterval(function()
{
if(idle == 'inactive')
{
return;
}
if(idle == true)
{
idleFunction();
idle = 'inactive';
return;
}
idle = true;
}, 30000); // half the expected time. Idle will trigger after 60 s in this case.
function idleFuntion()
{
console.log('user is idle');
}
Here is an AngularJS service for accomplishing in Angular.
/* Tracks now long a user has been idle. secondsIdle can be polled
at any time to know how long user has been idle. */
fuelServices.factory('idleChecker',['$interval', function($interval){
var self = {
secondsIdle: 0,
init: function(){
$(document).mousemove(function (e) {
self.secondsIdle = 0;
});
$(document).keypress(function (e) {
self.secondsIdle = 0;
});
$interval(function(){
self.secondsIdle += 1;
}, 1000)
}
}
return self;
}]);
Keep in mind this idle checker will run for all routes, so it should be initialized in .run() on load of the angular app. Then you can use idleChecker.secondsIdle inside each route.
myApp.run(['idleChecker',function(idleChecker){
idleChecker.init();
}]);
Surely you want to know about window.requestIdleCallback(), which queues a function to be called during a browser's idle periods.
You can see an elegant usage of this API in the Quicklink repo.
const requestIdleCallback = window.requestIdleCallback ||
function (cb) {
const start = Date.now();
return setTimeout(function () {
cb({
didTimeout: false,
timeRemaining: function () {
return Math.max(0, 50 - (Date.now() - start));
},
});
}, 1);
};
The meaning of the code above is: if the browser supports requestIdleCallback (check the compatibility), uses it. If is not supported, uses a setTimeout(()=> {}, 1) as fallback, which should queue the function to be called at the end of the event loop.
Then you can use it like this:
requestIdleCallback(() => {...}, {
timeout: 2000
});
The second parameter is optional, you might want to set a timeout if you want to make sure the function is executed.
You could probably detect inactivity on your web page using the mousemove tricks listed, but that won't tell you that the user isn't on another page in another window or tab, or that the user is in Word or Photoshop, or WoW and just isn't looking at your page at this time.
Generally, I'd just do the prefetch and rely on the client's multi-tasking. If you really need this functionality, you do something with an ActiveX control in Windows, but it's ugly at best.
Debounce is actually a great idea! Here is a version for jQuery-free projects:
const derivedLogout = createDerivedLogout(30);
derivedLogout(); // It could happen that the user is too idle)
window.addEventListener('click', derivedLogout, false);
window.addEventListener('mousemove', derivedLogout, false);
window.addEventListener('keyup', derivedLogout, false);
function createDerivedLogout (sessionTimeoutInMinutes) {
return _.debounce( () => {
window.location = this.logoutUrl;
}, sessionTimeoutInMinutes * 60 * 1000 )
}

Categories