How do you definitively detect whether or not the user has pressed the back button in the browser?
How do you enforce the use of an in-page back button inside a single page web application using a #URL system?
Why on earth don't browser back buttons fire their own events!?
(Note: As per Sharky's feedback, I've included code to detect backspaces)
So, I've seen these questions frequently on SO, and have recently run into the issue of controlling back button functionality myself. After a few days of searching for the best solution for my application (Single-Page with Hash Navigation), I've come up with a simple, cross-browser, library-less system for detecting the back button.
Most people recommend using:
window.onhashchange = function() {
//blah blah blah
}
However, this function will also be called when a user uses on in-page element that changes the location hash. Not the best user experience when your user clicks and the page goes backwards or forwards.
To give you a general outline of my system, I'm filling up an array with previous hashes as my user moves through the interface. It looks something like this:
function updateHistory(curr) {
window.location.lasthash.push(window.location.hash);
window.location.hash = curr;
}
Pretty straight forward. I do this to ensure cross-browser support, as well as support for older browsers. Simply pass the new hash to the function, and it'll store it for you and then change the hash (which is then put into the browser's history).
I also utilise an in-page back button that moves the user between pages using the lasthash array. It looks like this:
function goBack() {
window.location.hash = window.location.lasthash[window.location.lasthash.length-1];
//blah blah blah
window.location.lasthash.pop();
}
So this will move the user back to the last hash, and remove that last hash from the array (I have no forward button right now).
So. How do I detect whether or not a user has used my in-page back button, or the browser button?
At first I looked at window.onbeforeunload, but to no avail - that is only called if the user is going to change pages. This does not happen in a single-page-application using hash navigation.
So, after some more digging, I saw recommendations for trying to set a flag variable. The issue with this in my case, is that I would try to set it, but as everything is asynchronous, it wouldn't always be set in time for the if statement in the hash change. .onMouseDown wasn't always called in click, and adding it to an onclick wouldn't ever trigger it fast enough.
This is when I started to look at the difference between document, and window. My final solution was to set the flag using document.onmouseover, and disable it using document.onmouseleave.
What happens is that while the user's mouse is inside the document area (read: the rendered page, but excluding the browser frame), my boolean is set to true. As soon as the mouse leaves the document area, the boolean flips to false.
This way, I can change my window.onhashchange to:
window.onhashchange = function() {
if (window.innerDocClick) {
window.innerDocClick = false;
} else {
if (window.location.hash != '#undefined') {
goBack();
} else {
history.pushState("", document.title, window.location.pathname);
location.reload();
}
}
}
You'll note the check for #undefined. This is because if there is no history available in my array, it returns undefined. I use this to ask the user if they want to leave using a window.onbeforeunload event.
So, in short, and for people that aren't necessarily using an in-page back button or an array to store the history:
document.onmouseover = function() {
//User's mouse is inside the page.
window.innerDocClick = true;
}
document.onmouseleave = function() {
//User's mouse has left the page.
window.innerDocClick = false;
}
window.onhashchange = function() {
if (window.innerDocClick) {
//Your own in-page mechanism triggered the hash change
} else {
//Browser back button was clicked
}
}
And there you have it. a simple, three-part way to detect back button usage vs in-page elements with regards to hash navigation.
EDIT:
To ensure that the user doesn't use backspace to trigger the back event, you can also include the following (Thanks to #thetoolman on this Question):
$(function(){
/*
* this swallows backspace keys on any non-input element.
* stops backspace -> back
*/
var rx = /INPUT|SELECT|TEXTAREA/i;
$(document).bind("keydown keypress", function(e){
if( e.which == 8 ){ // 8 == backspace
if(!rx.test(e.target.tagName) || e.target.disabled || e.target.readOnly ){
e.preventDefault();
}
}
});
});
You can try popstate event handler, e.g:
window.addEventListener('popstate', function(event) {
// The popstate event is fired each time when the current history entry changes.
var r = confirm("You pressed a Back button! Are you sure?!");
if (r == true) {
// Call Back button programmatically as per user confirmation.
history.back();
// Uncomment below line to redirect to the previous page instead.
// window.location = document.referrer // Note: IE11 is not supporting this.
} else {
// Stay on the current page.
history.pushState(null, null, window.location.pathname);
}
history.pushState(null, null, window.location.pathname);
}, false);
Note: For the best results, you should load this code only on specific pages where you want to implement the logic to avoid any other unexpected issues.
The popstate event is fired each time when the current history entry changes (user navigates to a new state). That happens when user clicks on browser's Back/Forward buttons or when history.back(), history.forward(), history.go() methods are programatically called.
The event.state is property of the event is equal to the history state object.
For jQuery syntax, wrap it around (to add even listener after document is ready):
(function($) {
// Above code here.
})(jQuery);
See also: window.onpopstate on page load
See also the examples on Single-Page Apps and HTML5 pushState page:
<script>
// jQuery
$(window).on('popstate', function (e) {
var state = e.originalEvent.state;
if (state !== null) {
//load content with ajax
}
});
// Vanilla javascript
window.addEventListener('popstate', function (e) {
var state = e.state;
if (state !== null) {
//load content with ajax
}
});
</script>
This should be compatible with Chrome 5+, Firefox 4+, IE 10+, Safari 6+, Opera 11.5+ and similar.
if (window.performance && window.performance.navigation.type == window.performance.navigation.TYPE_BACK_FORWARD) {
alert('hello world');
}
This is the only one solution that worked for me (it's not a onepage website).
It's working with Chrome, Firefox and Safari.
I had been struggling with this requirement for quite a while and took some of the solutions above to implement it. However, I stumbled upon an observation and it seems to work across Chrome, Firefox and Safari browsers + Android and iPhone
On page load:
window.history.pushState({page: 1}, "", "");
window.onpopstate = function(event) {
// "event" object seems to contain value only when the back button is clicked
// and if the pop state event fires due to clicks on a button
// or a link it comes up as "undefined"
if(event){
// Code to handle back button or prevent from navigation
}
else{
// Continue user action through link or button
}
}
Let me know if this helps. If am missing something, I will be happy to understand.
In javascript, navigation type 2 means browser's back or forward button clicked and the browser is actually taking content from cache.
if(performance.navigation.type == 2)
{
//Do your code here
}
Correct answer is already there to answer the question. I want to mention new JavaScript API PerformanceNavigationTiming, it's replacing deprecated performance.navigation.
Following code will log in console "back_forward" if user landed on your page using back or forward button. Take a look at compatibility table before using it in your project.
var perfEntries = performance.getEntriesByType("navigation");
for (var i = 0; i < perfEntries.length; i++) {
console.log(perfEntries[i].type);
}
This will definitely work (For detecting back button click)
$(window).on('popstate', function(event) {
alert("pop");
});
My variant:
const inFromBack = performance && performance.getEntriesByType( 'navigation' ).map( nav => nav.type ).includes( 'back_forward' )
Browser: https://jsfiddle.net/Limitlessisa/axt1Lqoz/
For mobile control: https://jsfiddle.net/Limitlessisa/axt1Lqoz/show/
$(document).ready(function() {
$('body').on('click touch', '#share', function(e) {
$('.share').fadeIn();
});
});
// geri butonunu yakalama
window.onhashchange = function(e) {
var oldURL = e.oldURL.split('#')[1];
var newURL = e.newURL.split('#')[1];
if (oldURL == 'share') {
$('.share').fadeOut();
e.preventDefault();
return false;
}
//console.log('old:'+oldURL+' new:'+newURL);
}
.share{position:fixed; display:none; top:0; left:0; width:100%; height:100%; background:rgba(0,0,0,.8); color:white; padding:20px;
<!DOCTYPE html>
<html>
<head>
<title>Back Button Example</title>
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
</head>
<body style="text-align:center; padding:0;">
Share
<div class="share" style="">
<h1>Test Page</h1>
<p> Back button press please for control.</p>
</div>
</body>
</html>
See this:
history.pushState(null, null, location.href);
window.onpopstate = function () {
history.go(1);
};
it works fine...
I was able to use some of the answers in this thread and others to get it working in IE and Chrome/Edge. history.pushState for me wasn't supported in IE11.
if (history.pushState) {
//Chrome and modern browsers
history.pushState(null, document.title, location.href);
window.addEventListener('popstate', function (event) {
history.pushState(null, document.title, location.href);
});
}
else {
//IE
history.forward();
}
A full-fledged component can be implemented only if you redefine the API (change the methods of object ' history ')
I will share the class just written.
Tested on Chrome and Mozilla
Support only HTML5 and ECMAScript5-6
class HistoryNavigation {
static init()
{
if(HistoryNavigation.is_init===true){
return;
}
HistoryNavigation.is_init=true;
let history_stack=[];
let n=0;
let current_state={timestamp:Date.now()+n};
n++;
let init_HNState;
if(history.state!==null){
current_state=history.state.HNState;
history_stack=history.state.HNState.history_stack;
init_HNState=history.state.HNState;
} else {
init_HNState={timestamp:current_state.timestamp,history_stack};
}
let listenerPushState=function(params){
params=Object.assign({state:null},params);
params.state=params.state!==null?Object.assign({},params.state):{};
let h_state={ timestamp:Date.now()+n};
n++;
let key = history_stack.indexOf(current_state.timestamp);
key=key+1;
history_stack.splice(key);
history_stack.push(h_state.timestamp);
h_state.history_stack=history_stack;
params.state.HNState=h_state;
current_state=h_state;
return params;
};
let listenerReplaceState=function(params){
params=Object.assign({state:null},params);
params.state=params.state!==null?Object.assign({},params.state):null;
let h_state=Object.assign({},current_state);
h_state.history_stack=history_stack;
params.state.HNState=h_state;
return params;
};
let desc=Object.getOwnPropertyDescriptors(History.prototype);
delete desc.constructor;
Object.defineProperties(History.prototype,{
replaceState:Object.assign({},desc.replaceState,{
value:function(state,title,url){
let params={state,title,url};
HistoryNavigation.dispatchEvent('history.state.replace',params);
params=Object.assign({state,title,url},params);
params=listenerReplaceState(params);
desc.replaceState.value.call(this,params.state,params.title,params.url);
}
}),
pushState:Object.assign({},desc.pushState,{
value:function(state,title,url){
let params={state,title,url};
HistoryNavigation.dispatchEvent('history.state.push',params);
params=Object.assign({state,title,url},params);
params=listenerPushState(params);
return desc.pushState.value.call(this, params.state, params.title, params.url);
}
})
});
HistoryNavigation.addEventListener('popstate',function(event){
let HNState;
if(event.state==null){
HNState=init_HNState;
} else {
HNState=event.state.HNState;
}
let key_prev=history_stack.indexOf(current_state.timestamp);
let key_state=history_stack.indexOf(HNState.timestamp);
let delta=key_state-key_prev;
let params={delta,event,state:Object.assign({},event.state)};
delete params.state.HNState;
HNState.history_stack=history_stack;
if(event.state!==null){
event.state.HNState=HNState;
}
current_state=HNState;
HistoryNavigation.dispatchEvent('history.go',params);
});
}
static addEventListener(...arg)
{
window.addEventListener(...arg);
}
static removeEventListener(...arg)
{
window.removeEventListener(...arg);
}
static dispatchEvent(event,params)
{
if(!(event instanceof Event)){
event=new Event(event,{cancelable:true});
}
event.params=params;
window.dispatchEvent(event);
};
}
HistoryNavigation.init();
// exemple
HistoryNavigation.addEventListener('popstate',function(event){
console.log('Will not start because they blocked the work');
});
HistoryNavigation.addEventListener('history.go',function(event){
event.params.event.stopImmediatePropagation();// blocked popstate listeners
console.log(event.params);
// back or forward - see event.params.delta
});
HistoryNavigation.addEventListener('history.state.push',function(event){
console.log(event);
});
HistoryNavigation.addEventListener('history.state.replace',function(event){
console.log(event);
});
history.pushState({h:'hello'},'','');
history.pushState({h:'hello2'},'','');
history.pushState({h:'hello3'},'','');
history.back();
```
Here's my take at it. The assumption is, when the URL changes but there has no click within the document detected, it's a browser back (yes, or forward). A users click is reset after 2 seconds to make this work on pages that load content via Ajax:
(function(window, $) {
var anyClick, consoleLog, debug, delay;
delay = function(sec, func) {
return setTimeout(func, sec * 1000);
};
debug = true;
anyClick = false;
consoleLog = function(type, message) {
if (debug) {
return console[type](message);
}
};
$(window.document).click(function() {
anyClick = true;
consoleLog("info", "clicked");
return delay(2, function() {
consoleLog("info", "reset click state");
return anyClick = false;
});
});
return window.addEventListener("popstate", function(e) {
if (anyClick !== true) {
consoleLog("info", "Back clicked");
return window.dataLayer.push({
event: 'analyticsEvent',
eventCategory: 'test',
eventAction: 'test'
});
}
});
})(window, jQuery);
The document.mouseover does not work for IE and FireFox.
However I have tried this :
$(document).ready(function () {
setInterval(function () {
var $sample = $("body");
if ($sample.is(":hover")) {
window.innerDocClick = true;
} else {
window.innerDocClick = false;
}
});
});
window.onhashchange = function () {
if (window.innerDocClick) {
//Your own in-page mechanism triggered the hash change
} else {
//Browser back or forward button was pressed
}
};
This works for Chrome and IE and not FireFox. Still working to get FireFox right. Any easy way on detecting Browser back/forward button click are welcome, not particularly in JQuery but also AngularJS or plain Javascript.
I solved it by keeping track of the original event that triggered the hashchange (be it a swipe, a click or a wheel), so that the event wouldn't be mistaken for a simple landing-on-page, and using an additional flag in each of my event bindings. The browser won't set the flag again to false when hitting the back button:
var evt = null,
canGoBackToThePast = true;
$('#next-slide').on('click touch', function(e) {
evt = e;
canGobackToThePast = false;
// your logic (remember to set the 'canGoBackToThePast' flag back to 'true' at the end of it)
}
<input style="display:none" id="__pageLoaded" value=""/>
$(document).ready(function () {
if ($("#__pageLoaded").val() != 1) {
$("#__pageLoaded").val(1);
} else {
shared.isBackLoad = true;
$("#__pageLoaded").val(1);
// Call any function that handles your back event
}
});
The above code worked for me. On mobile browsers, when the user clicked on the back button, we wanted to restore the page state as per his previous visit.
Solution for Kotlin/JS (React):
import org.w3c.dom.events.Event
import kotlin.browser.document
import kotlin.browser.window
...
override fun componentDidMount() {
window.history.pushState(null, document.title, window.location.href)
window.addEventListener("popstate", actionHandler)
}
...
val actionHandler: (Event?) -> Unit = {
window.history.pushState(
null,
document.title,
window.location.href
)
// add your actions here
}
Was looking for a solution for this issue and put together a simple skeleton test html based on a few answers here and the MDN Web Doc pages for History.pushState() and WindowEventHandlers.onpopstate.
The following HTML and JavaScript is easy enough to copy and paste and test.
Works with back and forward browser buttons, shortcut keys, adds a change to the URL (which is important in some cases).
Simply enough to add to existing code key points and should be expandable too.
<html>
<body>
<div id="p1">Option 1</div>
<div id="p2">Option 2</div>
<div id="p3">Option 3</div>
<div id="p4">Option 4</div>
<div id="c"></div>
<script>
var chg={
set:function(str){
var d=document.getElementById("c");
d.textContent=str;
},
go:function(e){
var s={"p":this.id};
chg.set(s.p);
hstry.add(s);
}
};
var hstry={
add:function(s){
var u=new URL(window.location);
u.searchParams.set("x",s.p);
window.history.pushState(s,"",u);
},
adjust:function(state){
if(state.p){
chg.set(state.p);
}
}
};
window.onpopstate=function(e){
console.log("popstate, e.state:["+ JSON.stringify(e.state) +"]");
hstry.adjust(e.state);
}
window.onload=function(){
var i,d,a=["p1","p2","p3","p4"];
for(i=0;i<a.length;i++){
d=document.getElementById(a[i]);
d.addEventListener("click",chg.go,false);
}
}
</script>
</body>
</html>
browser will emit popstate event if you navigate through your app with calling
window.history.pushState({},'','/to')
If you manually enter the addresses into the address bar and click on the back button, popstate event will NOT be fired.
If you navigate in your app with this simplified function
const navigate = (to) => {
window.history.pushState({}, ",", to);
};
then this will work
const handlePopstate = () => {
console.log("popped");
};
window.addEventListener("popstate", handlePopstate);
I tried the above options but none of them is working for me. Here is the solution
if(window.event)
{
if(window.event.clientX < 40 && window.event.clientY < 0)
{
alert("Browser back button is clicked...");
}
else
{
alert("Browser refresh button is clicked...");
}
}
Refer this link http://www.codeproject.com/Articles/696526/Solution-to-Browser-Back-Button-Click-Event-Handli for more details
I am having a script as below:-
function getColorValue(aId,atitle) {
try{
var clientContext = new SP.ClientContext();
var oWebsite = clientContext.get_web();
var oList = oWebsite.get_lists().getByTitle('Item type');
var oListItem = oList.getItemById(parseInt(aId));
clientContext.load(oListItem);
clientContext.executeQueryAsync(function () {
var listItem = oListItem;
var colorname = listItem.get_item('Color_x0020_Name');
if (typeof colorname != 'undefined') {
if (colorname != null) {
$("div[title$='" + atitle + "']").css("background-color", colorname);
}
}
}, onColorQueryFail);
}
catch(e){
}
}
I need to call this script each time after a SharePoint Calendar Item is created.
Can anyone help?
The following JavaScript example demonstrates how to register event that will be triggered after Calendar item is created:
//custom handler that will be triggered after Calendar item is created
function onEventCreated(){
alert('Event has been created...');
}
function registerCalendarEventOnItemCreated(event)
{
var currentCtx = getCurrentContextInfo();
var calContainer = SP.UI.ApplicationPages.CalendarInstanceRepository.lookupInstance(currentCtx.ctxId);
for(var name in calContainer) {
if(calContainer.hasOwnProperty(name)) {
var p = calContainer[name];
if(p instanceof SP.UI.ApplicationPages.CalendarNewFormDialog) {
p.get_events().addHandler("newitemcreated",event);
}
}
}
}
//get current context info
function getCurrentContextInfo()
{
var currentListId = new SP.Guid(_spPageContextInfo.pageListId);
for(var ctxKey in g_ctxDict){
var curCtx = g_ctxDict[ctxKey];
if(curCtx.listName == currentListId.toString()){
return curCtx;
}
}
return null;
}
//register Calendar events
$('body').on('click', 'div#AsynchronousViewDefault_CalendarView', function() {
registerCalendarEventOnItemCreated(onEventCreated);
});
Has been tested against SharePoint 2013/Online
In your case the function getColorValue could be invoked from onEventCreated, for example:
function onEventCreated(){
getColorValue (id,title);
}
How to apply changes
Switch the page into Edit mode
Add Script Editor webpart into page.
Put the specified code by wrapping it using script tag code into the Script Editor, for example: <script type="text/javascript">{JavaScipt code goes here}</script>
Save the page
Results
Create an Event Receiver with List Item Events for type and Calendar for Source then check 'An item is being added' in handling the event.
Then in the code behind of your Event Receiver:
public override void ItemAdding(SPItemEventProperties properties)
{
base.ItemAdding(properties);
//Call your function through this
Page.ClientScript.RegisterStartupScript(this.GetType(), "CallMyFunction", "MyFunction()", true);
}
Hope that helps :)
I know this is an old question, but there is an issue with the solution given.
I had a requirement to implement an workaround to the missing Resource Reservation feature in Sharepoint online. It was not possible to use an approach more suitable to the Modern Experience, due its dependency of Azure (no Azure subscription available for it), so I use Sharepoint API calls to perform the the same functionality of Resource Reservation.
To use the Sharepoint API, some Ajax calls were needed. But I observed that two calls were executed for each request.
The point is when you register calendar events, it is needed to attach the click event using one, as seen below, to prevent the click event to be fired more than once.
//register Calendar events
$('body').one('click', 'div#AsynchronousViewDefault_CalendarView', function() {
registerCalendarEventOnItemCreated(onEventCreated);
});
First Question here, too! Yay! Just moved this from AskUbuntu.
I am just about to finish a little private project for gaining some experience where i try to change the app layout so it works as a normal website (on Jimdo, so it was quite of a challenge first) without much JavaScript required but is fully functional on mobile view.
Since Jimdo serves naturally only the actual site, I had to implement an
if (activeTab.getAttribute('jimdo-target') != null)
location.href = activeTab.getAttribute('jimdo-target');
redirect into the __doSelectTab() function in tabs.js . (In js I took the values from the jimdo menu string to build the TABS menu with this link attribute)
Now everything works fine exept at page load the first tab is selected. I got it to set the .active and .inactive classes right easily, but it is not shifted to the left.
So my next idea is to let it initialize as always and then send a command to change to the current tab.
Do you have any idea how to manage this? I couldn't because of the this.thisandthat element I apparently don't really understand...
Most of you answering have the toolkit and the whole code, but I am listing the select function part of the tabs.js:
__doSelectTab: function(tabElement, forcedSelection) {
if ( ! tabElement)
return;
if (tabElement.getAttribute("data-role") !== 'tabitem')
return;
if (forcedSelection ||
(Array.prototype.slice.call(tabElement.classList)).indexOf('inactive') > -1) {
window.clearTimeout(t2);
activeTab = this._tabs.querySelector('[data-role="tabitem"].active');
offsetX = this.offsetLeft;
this._tabs.style['-webkit-transition-duration'] = '.3s';
this._tabs.style.webkitTransform = 'translate3d(-' + offsetX + 'px,0,0)';
this.__updateActiveTab(tabElement, activeTab);
if (activeTab.getAttribute('jimdo-target') != null)
location.href = activeTab.getAttribute('jimdo-target');
[].forEach.call(this._tabs.querySelectorAll('[data-role="tabitem"]:not(.active)'), function (e) {
e.classList.remove('inactive');
});
var targetPageId = tabElement.getAttribute('data-page');
this.activate(targetPageId);
this.__dispatchTabChangedEvent(targetPageId);
} else {
[].forEach.call(this._tabs.querySelectorAll('[data-role="tabitem"]:not(.active)'), function (el) {
el.classList.toggle('inactive');
});
var self = this;
t2 = window.setTimeout(function () {
var nonActiveTabs = self._tabs.querySelectorAll('[data-role="tabitem"]:not(.active)');
[].forEach.call(nonActiveTabs, function (el) {
el.classList.toggle('inactive');
});
}, 3000);
}
},
...and my app.js hasn't anything special:
var UI = new UbuntuUI();
document.addEventListener('deviceready', function() { console.log('device ready') }, true);
$(document).ready(function () {
recreate_jimdo_nav();
UI.init();
});
So meanwhile found a simple workaround, however I'd still like to know if there is another way. Eventually I noticed the __doSelectTab() function is the one that executes the click, so it does nothing but to show the other tab names when they are hidden first. so I added the global value
var jnavinitialized = false;
at the beginning of the tabs.js and run
var t = this;
setTimeout(function(){t.__doSelectTab(t._tabs.querySelector('[data-role="tabitem"].jnav-current'))}, 0);
setTimeout(function(){t.__doSelectTab(t._tabs.querySelector('[data-role="tabitem"].jnav-current'))}, 1);
setTimeout(function(){jnavinitialized = true;}, 10);
at the top of the __setupInitialTabVisibility() function. Then I changed the location.href command to
if (activeTab.getAttribute('jimdo-target') != null && jnavinitialized)
location.href = activeTab.getAttribute('jimdo-target');
And it works. But originally I searched for a way to change the tab on command, not to run the command for selecting twice. So if you know a better or cleaner way, you are welcome!