I am making a chat-like interface which can be seen here (best viewed in Chrome right now):
http://qas.im/web/sms.php
The temporary username:password is temp_guest:password
My problem is that when you click one of the chats, it doesnt automatically scroll to the bottom when I use this code:
$(".messages").attr({ scrollTop: $(".messages").attr("scrollHeight") });
What could be wrong? The messages div has a css of:
.messages {
height:400px;
overflow: auto;
}
For people who are wondering: Page isnt HTML validated yet but I will be cleaning it up soon. Most of the page is auto-generated which is challenging to make the code look pretty ;P
If you are using jQuery 1.6 or later, use prop instead of attr.
Working example: http://jsfiddle.net/FishBasketGordo/PNwj3/
I found two issues.
The first is that you were trying to set all .message DIVs to the height of the first DIV, so if the first DIV was hidden, it would never work.
The second was that jQuery's attr function is only for node attributes.
This method works better, and scrolls all the divs correctly:
$(".messages").each(function(idx, node) { node.scrollTop = node.scrollHeight; });
Alternatively, you can improve performance by using this selector:
$(".messages:visible").each(function(idx, node) { node.scrollTop = node.scrollHeight; });
Which works on visible message nodes.
Related
I have a test page to better explain my problem. I have several items on a list (they're images on the test page); when I click on one of them, a corresponding slideshow, using flexslider, sldes down.
The problem is that, on page load, the slideshow shows all slides at once, at a much smaller size than intended. But then, if I switch the focus from the window (i.e. switch between browser tabs or move to another program and come back), the slideshow is now working and the slides are the proper size. This happens in mobile devices too.
When I check with firebug, there's an element.style rule applying to ul.slides:
transform: translate3d(-89px, 0px, 0px);
Which hides one of the slides. Additionally, there's another rule for the list items inside ul.slides that gives them their initial width, which is not even the same for all sliders so I don't understand where it is coming from.
Can someone take a look and suggest a fix? I've tried overriding the element.style rule but so far unsuccessfully.
I think I've figured it out, in principal at least...
.flexslider{display:none;} seems throw off the re-size function of Flexslider.
You could just remove it, but that makes for some ugly loading.
To avoid said ugly loading I put together a quick, work-around- jsFiddle
$(document).ready(function(){
$(".flexslider").css('display','block').slideUp();
});
There's a still a quick glitch while loading, but hopefully it will at least steer you in the right direction.
Another method I played with a bit was to try and force the re-size function like so-
$(".client").click(function () {
$('.flexslider').resize(); // Problematic but promising
var project = this.id;
var project_id = '#' + project + '-project';
var elem = $(".flexslider:visible").length ? $(".flexslider:visible"): $(".flexslider:first");
elem.slideUp('slow', function () {
$(project_id).slideDown('slow');
});
});
This sort of solved the mini-picture issue, but was spotty at best.
I need to be able to scroll back to the top of a page within my ui-routed angular one-page site when a function is triggered, but I've used the simplebar scrollbar plugin as a custom scroller, so can't use the window scrolltop method to take the user back to the top of the page.
I can't use any window/document scrolling method as the container that utilises simplebar is a fixed 100vh container, therefore the window is always scrolled to the top.
I've tried using the jquery method below to reset the position of the scrollbar back to the top, but can't get it working, and there are no error messages in the console.
angular.element('#mainContent').simplebar('getScrollElement').scrollTop(0);
I've also tried this in plain js, which returns 'is not a function' in the console:
var mainContent = new SimpleBar(document.getElementById('mainContent'));
mainContent.SimpleBar.getScrollElement().scrollTop = 0;
It seems that the new SimpleBar(xxx) approach does not work with data-simplebar html attribute.
I don't want to initialize the SimpleBar programmatically so I used this in stead:
$('#mainContent .simplebar-content-wrapper').scrollTop(some_value)
The actual scrollable element would have simplebar-content-wrapper class, and it would be inside the element that you've added SimpleBar for.
The class simplebar-content-wrapper was mentioned in its documentation and can be expected to be consistent across versions.
There would be problem if you have cascaded SimpleBars. Solutions:
$('#mainContent .simplebar-content-wrapper')[0].scrollTop = some_value: This would only scroll the correct SimpleBar because the elements returned by nowaday JQuery is in document order.
$('#mainContent>>>>.simplebar-content-wrapper').scrollTop(some_value): The hierarchy of SimpleBar components is not guaranteed to be unchanged in future versions and this may fail in the future.
I have found the solution. You can access scroll element:
const el = new SimpleBar(document.getElementById('layout'));
el.scrollContentEl.scrollTop = 0;
You can try .animate for this:
$("body").animate({ scrollTop: 0 }, "slow");
var el = new SimpleBar(document.getElementById('myElement'));
el.getScrollElement().scrollTop = 0;
This is certainly going to be an easy one but I can't get my head around what I am doing wrong...
I am trying to do a hover effect on a UL that affects a link within one of the UL LI's.
My current code looks like this:
$("ul.punchlines").hover(function () {
$(this).find("li a.light-grey-gradient").animate({'width' : '60%','top':'-65px'});
});
$("ul.punchlines").mouseleave(function () {
$(this).find("li a.light-grey-gradient").animate({'width' : '30%','top':'0px'});
});
This technically works as it gives the effect that the base of the element to be scaled remains in place and scales up from the bottom however it does it in two stages, I am trying to get this effect to happen all in one motion so it is a seamless scale and move.
I can do this easily with basic CSS3 transitions but as it is not supported in IE9 I am trying to use jQuery to allow for maximum browser support.
Can anyone offer a little support firstly about how I get the animation to happen in one motion (not staggered) and secondly if this is the right approach? I am new to jquery and only just getting my hands dirty with it :-)
Please see JQuery hover api:
http://api.jquery.com/hover/
also make sure that your "li" have absolute position.
$("ul.punchlines").hover(function () {
$(this).find("li a.light-grey-gradient").animate({'width' : '60%','top':'-65px'});
}, function () {
$(this).find("li a.light-grey-gradient").animate({'width' : '30%','top':'0px'});
});
I have built a parallax scrolling intro for a clients website - the site contains many high res images - so I have created a quick loader which blanks out the screen with a full screen high z-index div and then uses the setTimeout method to fade in the page 4 seconds after document ready (not sure if this is the best way to do this but it works in every test I've tried).
I would like to disable the scroll to prevent users scrolling through the animation before it appears -can anyone recommend a good cross-browser method to do this?
If you want to fade in when all images are loaded, you can try this
var images = $('img');
var images_nbr = images.length;
images.load(function() {
images_nbr--;
if (images_nbr == 0) {
$('body').css('overflow','auto');
$('...').fadeIn();
}
});
Set
#mydiv {
overflow:hidden
}
in your parent div in CSS. Then, in your document, add this...
$('#mydiv').css('overflow', 'auto');
...in the function that fades in your content.
Thus, on load the page will be unscrollable, but when you fade in, the overflow property will be overwritten and allow the content to scroll.
.scrolldiv{
overflow:hidden;
}
$(window).load(function(){
$(".scrolldiv").css("overflow","auto");
});
You can try like,
initially add the below css on body
body {overflow:hidden;}
and after your setInterval function complete execution (whatever your loading function) just remove the style from body, like
$('body').css('overflow','auto');
In my app I have 2 divs, one with a long list of products that can be dragged into another div (shopping cart). The product div has the overflow but it breaks prototype draggable elements. The prototype hacks are very obtrusive and not compatible with all browsers.
So I am taking a different approach, is it possible to have a scrollable div without using CSS overflow:auto?
Theres a css property to control that.
<div style="width:100px;height:100px;overflow:scroll">
</div>
http://www.w3schools.com/Css/pr_pos_overflow.asp
You can use a frame with content larger than its window. Might make it hard to pass JS events though.
Here is what I wrote to have it running under IE 8.0.6 & Firefox 3.6.3:
Make draggable the elements (with border) in the "width:100px;scrollable:auto" container:
function makeDraggable(container,tag) {
if(!container || !tag) { return false; }
$(container).select(tag).each( function(o) {
new Draggable(o,{
starteffect: function(e){makeDragVisible(container,e);},
endeffect: function(e){e.setStyle({'position':'','width':'','cursor':''});},
zindex: 1000
// , revert: ... // the other options
});
});
}
function makeDragVisible(container,element) {
if(!container || !element) { return false; }
var i=$(container).getStyle('width');
i=i.replace('px','');
i=Math.round(i-20)+'px';
element.setStyle({'width':i,'z-index':1000,'position':'absolute','cursor':'move'});
//
$(container).setStyle({});
}
Important notes:
the z-index is repeated
notice the container loss of style at the end of 'starteffect'. Cursor and width are simply there to keep the drag user friendly.
I hope it helps.