Remove hover and default state from jquery ui button - javascript

I have a set of anchors that I am converting to buttons like so:
var sideMenuAnchors = $("#divLeft a");
sideMenuAnchors.width("120px");
sideMenuAnchors.button();
However when one of these anchors is clicked I want the ui-state-active to remain until another button is clicked ... I have been unable to find a simple solution, is there one ?
I have tried this:
$('#anchor01').unbind('onmouseover').unbind('onmouseout');
and this :
$('#anchor01').disable()
However neither do what I require, as the ui-active-state is still removed on mouseout
Edit
The solution I implemented was to manually add the button classes that I required from jquery-ui, like so:
var sideMenuAnchors = $("#divLeft a");
sideMenuAnchors.addClass("ui-state-default ui-button ui-button-text-only");
sideMenuAnchors.width("120px");
sideMenuAnchors.height("25px");
sideMenuAnchors.removeClass('ui-corner-all');
sideMenuAnchors.first().addClass('ui-corner-top');
sideMenuAnchors.last().addClass('ui-corner-bottom');
sideMenuAnchors.hover( function() {
$(this).addClass("ui-state-hover");
},function() {
$(this).removeClass("ui-state-hover");
});

Since you're transforming hyperlinks into jQuery UI buttons, there are no group relationship between them and they're all considered as independent.
However, if you were transforming radio buttons (with the same name attribute), then jQuery UI would maintain the group relationship and you would obtain the behavior you're aiming for.
So, you can do just that: first, add a radio button and its associated label to each hyperlink, then transform these into buttons:
<form>
<div id="divLeft">
<a id="link1" href="#">Foo</a>
<a id="link2" href="#">Bar</a>
<a id="link3" href="#">Quux</a>
</div>
</form>
$(document).ready(function() {
$("#divLeft a").each(function() {
var $this = $(this);
var text = $this.text();
var radioId = $this.attr("id") + "_radio";
$this.text("").append(
$("<input type='radio' name='buttons'>").attr("id", radioId),
$("<label>").attr("for", radioId).text(text));
});
$("#divLeft a input:radio").width("120px").button();
});
You can see the results in this fiddle.

Related

Jquery Remove Element from List

I have a list in JQuery that's called additionalInfo, which is filled in using this JQuery function:
$('#append').on('click', function () {
//check if the following area is valid before moving on, check the jquery validation library
var text = $('#new-email').val();
var li = '<li>' + text + 'input type="hidden" name="additionalInfo" value="'+text+'"/> </li>';
$('#additional-info-list').append(li);
$('#new-email').val('');
});
The point of the function is not only to store the info in a list that can be used later, but also to render a <li> with the info text in it. Right now I have another button on each <li> that when pressed, makes the li vanish, but I also need to add code to it that completely removes the info text from the additionalInfo list. This is the code I have for that method so far:
$('#removeEmail').on('click', 'li>.remove-btn', function (event){
$(event.currentTarget).closest('li').remove();
});
How can I get the segment of info text out of the li and then remove it from additionalInfo?
You have few problems. First of all when you create the new items, your markup is not correct. You were missing the opening bracket of input tag. Also i changed the code for delete so that it listens for the click event on any item with class remove-btn under the li element. This should delete the item when you click the remove link inside the li.
$(function(){
$('#append').on('click', function () {
var text = $('#new-email').val();
var li = '<li>' + text + '<input type="hidden" name="additionalInfo"
value="'+text+'"/>
<a href="#" class="remove-btn" >remove</a></li>';
$('#additional-info-list').append(li);
$('#new-email').val('');
});
$(document).on('click', 'li>.remove-btn', function (event){
var _this =$(this);
_this.closest('li').remove();
});
});
Here is a working jsfiddle

Output input selection as text to element

I'm a UI Designer working on a multi-page Q&A form, I'm a beginner with jQuery mostly mashing snippets together.
Here's the code: http://codepen.io/covanant/pen/GJZYLq
This part of the form is basically multiple accordions wrapped into tabs, I have most of it working as required but one of the things I need to do, is that whenever I a choice or option, I want to be able to output that option to an element as text right underneath the question.
The element is:
<span class="selected-answer"></span>
You can see it displayed in the first question in the demo, the way that I'd like it to work is that whenever I click the Close All button, it will fadeIn the .selected-answer element and when I click Open All, it will fadeOut the .selected-answer element.
The buttons:
Open All
Close All
jQuery:
// Open All & Close All buttons
$('.closeall').click(function(){
$('.panel-collapse.in')
.collapse('hide');
});
$('.openall').click(function(){
$('.panel-collapse:not(".in")')
.collapse('show');
});
First, it doesn't make sense to give each of your select options the same value attribute. By convention, these should be distinct. If you aren't using the value attribute, you can remove it altogether. Otherwise, you should change it to something like:
<select>
<option value="None Selected">None Selected</option>
<option value="Photocell On">Photocell On</option>
<option value="Off Control Only">Off Control Only</option>
<option value="Photocell On / Off Control Only">Photocell On / Off Control Only</option>
</select>
Once that is sorted out, you need to go up the DOM hierarchy and find the right span element to change.
$('select').on('change', function() {
var span = $(this).closest('div.panel').find('span.selected-answer');
span.text($(this).val());
});
For the checkbox questions, you I would do something like this:
HTML:
<span class="selected-answer">
<ul class="checked-options">
<li data-check="checkbox1">nWifi (nLight)</li>
<li data-check="checkbox2">nLightFixtures</li>
<li data-check="checkbox3">xCella (LC&D)</li>
<li data-check="checkbox4">Daylight Harvesting</li>
<li data-check="checkbox5">xPoint (LC&D)</li>
<li data-check="checkbox6">nWifi (nLight)</li>
</ul>
</span>
CSS:
.checked-options li {
display: none;
}
jQuery:
$('input[type="checkbox"]').on('change', function() {
var checkbox = $(this);
var id = checkbox.attr('id');
if ($(this).prop('checked'))
$('li[data-check="' + id + '"]').show();
else
$('li[data-check="' + id + '"]').hide();
});
As for the fading, this should do the trick:
// Open All & Close All buttons
$('.closeall').click(function(){
$('.panel-collapse.in')
.collapse('hide');
$('.selected-answer').fadeIn();// <-- Fade in
});
$('.openall').click(function(){
$('.panel-collapse:not(".in")')
.collapse('show');
$('.selected-answer').fadeOut();// <-- Fade out
});
Also, depending on whether you want all the questions open or closed by default when the form first loads, you may need to hide all the .selected-answer elements on page load.
Here's the updated codepen.
I agree with VCode on using distinct values for each option in the select elements. But instead of using the value you provide for each option, I think you should use the actual label, that way you can have a more description label, than the option value.
I modified a few of your existing functions to actually populate the selected answer. First I noticed that you already have a function for handling changes to your select - in there I added a small snippet to get the selected answer and pass it to nextQuestion.
$(".panel-body select").change(function() {
var selectElem = $(this);
var answer = selectElem.find("option:selected").text();
nextQuestion(selectElem, answer);
});
Then you also have input elements. Here is your modified input change function:
$(".panel-body input").change(function() {
var inputElem = $(this);
var inputType = inputElem.attr('type');
// common parent for input
var commonParent = inputElem.closest(".panel-body");
var answers = commonParent
.find("input:checked")
.closest("."+inputType)
.find("label")
.map(function(){return this.innerText;})
.get()
.join(", ");
nextQuestion(inputElem, answers);
});
And now as you may have noticed, I added a parameter to the nextQuestion function. I put this code in nextQuestion because you were already accessing the parent there so I wanted to re-use that logic to populate the selected answer.
function nextQuestion(currentQuestion,selectedAnswer) {
var parentEle = currentQuestion.parents(".panel");
if (arguments.length>1) {
parentEle.find('.selected-answer').text(selectedAnswer);
}
if (parentEle.next()) {
parentEle.find(".fa-question").addClass("fa-check check-mark").removeClass("question-mark fa-question").text("");
}
}
Just like VCode mentioned, you can do the fading of the answers using fadeIn/fadeOut
// Open All & Close All buttons
$('.closeall').click(function(){
$('.panel-collapse.in')
.collapse('hide');
$('.selected-answer').fadeIn();// <-- Fade in
});
$('.openall').click(function(){
$('.panel-collapse:not(".in")')
.collapse('show');
$('.selected-answer').fadeOut();// <-- Fade out
});
// hide all .selected-answers
$('.selected-answer').hide();
Here is a link to your codepen with my modifications: http://codepen.io/anon/pen/ZGpXXK

Javascript Loop Show hide elements in document (Jquery OK too)

I have a redundant process for making div's visible / hidden and I believe the way to make it more efficient is to use a loop.
Currently I have numerous div's through the document but there are 6 in particular that I want to deal with. I have a series of buttons that correspond to the six div's. When person clicks button A I want to show (make visible) div A and hide Div's B,C,D,E,F. My javascript is something like this:
<a href="#" onclick="ShowMe('A'); return false" />
<a href="#" onclick="ShowMe('B'); return false" />
<a href......etc />
<div id="A">blah...blah</div>
<div id="B">blah...blah</div>
<script type="java....">
function ShowHideDiv(DivName)
{
if(DivName == 'A')
{
var diva = document.getElementById('A');
div.style.visibility = 'visible';
var divb = document.getElementById('B');
div.style.visibility = 'hidden';
etc....
}
else if (DivName == 'B')
{
var diva = document.getElementById('A');
div.style.visibility = 'hidden';
var divb = document.getElementById('B');
div.style.visibility = 'visible';
etc...............
}
}
</script>
So as mentioned a prime candidate for loop but my question is how to contain the loop. For example if my loop went through the entire document object then I would have divs that I want visible being hidden so how do I avoid this?
I had two thought but was if others had additional thoughts, ideas, techniques etc.
Give my divs a really oddball prefix to their name like ShowHide_A then my loop can go through all the divs in the document object, parse it's name, if it doesn't have the prefix then move to the next one. This of course would be very inefficient if we had a large document and the script was getting every object and parsing then checking the name.
Wrap the div's in question in a parent container such as:
Then my javascript could be contained to looping through just the DivParent tree. But what if my div's are at different places in the document model? Do I keep them in the ParentDiv and position then where they belong with with css position properties?
Any other ideas would be greatly appreciated
JB
Let me suggest a better approach.
If you can use jQuery, you can do the following:
Assign a class (e.g. box) to all of your divs. Then your button needs to call this function:
function toggleDiv (divID) {
$(".box").hide();
$("#"+divID).show();
}
What you can also do is assign e.g. data-div attribute to your button which contains the ID of the div to hide/show, and then you can transform the above to the following (assuming your buttons have the button class):
$(".button").click(function () {
var divID = $(this).attr("data-div");
$(".box").hide();
$("#"+divID).show();
});
The above covers everything, assigning events to the buttons and hiding/showing divs.
see suppose you have markup like this
<div id="A" class="marked" >A</div>
<div id="B" class="marked" >B</div>
<div id="C" class="marked" >C</div>
<div id="D" class="marked" >D</div>
<div id="E" class="marked" >E</div>
<input type="button" value="Show A" data-target-div="A" />
<input type="button" value="Show B" data-target-div="B" />
then add a script like this:
$('input[type=button]').click(function(){
$('.marked').hide(200);
$('#'+$(this).data('target-div')).show();
});
it should work.
see this fiddle
so, you are not iterating through all the dom elements, you are picking exactly the ones you need to deal with. upon click, you hide all of them, and show the one which is target i.e. data-target-div
jQuery based solution:
Add a class to your div's that allow hiding/showing and then do
function ShowHideDiv(DivName)
{
$(".ShowHide").not("#" + DivName).hide();
$("#" + DivName).show();
}
Add class='switchable' (or whatever) to each such DIV then using prototype.js you could do something like this
function showMe( elem ) {
$$( '.switchable' ).each( function( switchable ) {
if ( switchable.id == $(elem).id )
switchable.show();
else
switchable.hide();
} );
}

JQuery - How to identify previously selected buttons

Scenario:
A simple html page exists with few buttons on Top (e.g. day, week) and BOTTOM (filter1 and filter2) of the page and Graph on center.
The graph displays a data based on selected filters.
Problem:
when user selects the filter2 I need to know what the user selected previously on TOP buttons so that the data can be displayed accordingly.
I'm using global variable to track the last selected buttons. This means lots of switch statements. I'm wondering if this is the most elegant way to solve this issue or is there any magic. function exist on Jquery.
I think the easiest way is to use data on the elements themselves.
<button id="day" class="graph-button" data-state="off">Day</button>
<button id="week" class="graph-button" data-state="off">Week</button>
<!-- graph here -->
<button id="filter1" class="graph-button" data-state="off">Filter 1</button>
<button id="filter2" class="graph-button" data-state="off">Filter 2</button>
Then you could have some jQuery something like this:
$(function(){
$('.graph-button').click(function(ev){
ev.preventDefault();
var state = $(this).data('state'),
newState = state == 'off' ? 'on' : 'off',
onButtons = [];
$(this).data('state', newState);
$('.graph-button[data-state="on"]').each(function(i, el){
onButtons.push(this.id);
});
// updateGraphWith(onButtons);
});
});
Let's assume the top buttons have class="topButton" and the filter buttons have class="filterButton" and all buttons have unique ids, then the jQuery will look something like this:
$(function(){
var topButtons = $(".topButton").on('click', function() {
var $this = $(this);
id = $this.attr('id');
if($this.hasClass('selected')) { return; }
topButtons.removeClass('selected');
$this.addClass('selected');
//perform click action here
});
$('.filterButton').on('click', function() {
var $this = $(this);
id = $this.attr('id'),
selectedTopButtonId = $('.topButton').filter('.selected').attr('id');
//perform filter action here
});
});
In both cases, the variable id lets you know which button was clicked.
By setting class="selected" on the selected top button, you can style the button and have something to test without needing to resort to a global variable.

How to Reduce Size of This jQuery Script and Make it More Flexible?

I just created script that shows/hides (toggles) block of HTML. There are four buttons that each can toggle its HTML block. When any HTML block is opened, but user has been clicked on other button than that HTML block's associated button... it hides that HTML block and shows new one.
Here is what I have at the moment:
$('.btn_add_event').click( function() {
$('.block_link, .block_photos, .block_videos').hide();
$('.block_event').toggle();
});
$('.btn_add_link').click( function() {
$('.block_event, .block_photos, .block_videos').hide();
$('.block_link').toggle();
});
$('.btn_add_photos').click( function() {
$('.block_event, .block_link, .block_videos').hide();
$('.block_photos').toggle();
});
$('.btn_add_videos').click( function() {
$('.block_event, .block_link, .block_photos').hide();
$('.block_videos').toggle();
});
Any ideas how to reduce code size? Also, this script isn't very flexible. Imagine to add two new buttons and blocks.
like Sam said, I would use a class that all the blocks share, so you never have to alter that code. Secondly, you can try 'traversing' to the closest block, therefore avoiding it's name. That approach is better than hard coding each specific block, but if the html dom tree changes you will need to refactor. Last, but best, you can pass in the class name desired block as a variable to the function. Below is something you can copy paste that is close to what you started with.
$('.myAddButtonClass').click( function() {
$('.mySharedBlockClass').filter(':visible').hide();
//find a good way to 'traverse' to your desired block, or name it specifically for now.
//$(this).closest(".mySharedBlockClass").show() complete guess
$('.specificBlockClass').show();
});
I kept reading this "When any HTML block is opened, but user has been clicked on other button than that HTML block's associated button" thinking that my eyes were failing me when Its just bad English.
If you want to make it more dynamic, what you can do is add a common class keyword. Then
when the click event is raise. You can have it loop though all the classes that have the
keyword and have it hide them all (except the current one that was clicked) and then show the current one by using the 'this' keyword.
you can refer below link,
http://chandreshmaheshwari.wordpress.com/2011/05/24/show-hide-div-content-using-jquery/
call function showSlidingDiv() onclick event and pass your button class dynamically.
This may be useful.
Thanks.
try this
$('input[type=button]').click( function() {
$('div[class^=block]').hide(); // I resumed html block is div
$(this).toggle();
});
Unfortunatly I couldn't test it, but if I can remember right following should work:
function toogleFunc(clickObject, toogleTarget, hideTarget)
{
$(clickObject).click(function()
{
$(hideTarget).hide();
$(toogleTarget).toggle();
});
}
And the call:
toogleFunc(
".btn_add_videos",
".block_videos",
".block_event, .block_link, .block_photos"
);
and so far
Assuming the buttons will only have one class each, something like this ought to work.
var classNames = [ 'btn_add_event', 'block_link', 'block_photos', 'block_videos' ];
var all = '.' + classNames.join(', .'); // generate a jquery format string for selection
$(all).click( function() {
var j = classNames.length;
while(j--){
if( this.className === classNames[j] ){
var others = classNames.splice(j, 1); // should leave all classes but the one on this button
$('.' + others.join(', .')).hide();
$('.' + classNames[j]).toggle();
}
}
}
All the buttons have the same handler. When the handler fires, it checks the sender for one of the classes in the list. If a class is found, it generates a jquery selection string from the remaining classes and hides them, and toggles the one found. You may have to do some checking to make sure the strings are generating correctly.
It depends by how your HTML is structured.
Supposing you've something like this
<div class="area">
<div class="one"></div>
<div class="two"></div>
<div class="three"></div>
</div>
...
<div class="sender">
<a class="one"></a>
<a class="two"></a>
<a class="three"></a>
</div>
You have a class shared by the sender and the target.
Your js would be like this:
$('.sender > a').click(function() {
var target = $(this).attr('class');
$('.area > .' + target).show().siblings().hide();
});
You show your real target and hide its siblings, which aren't needed.
If you put the class postfixes in an array, you can easily make this code more dynamic. This code assumed that it doesn't matter in which order toggle or hide are called. If it does matter, you can just remember the right classname inside the (inner) loop, and toggle that class after the loop.
The advantage to this approach is that you can extend the array with an exta class without needing to modifying the rest of the code.
var classes = new Array('videos', 'event', 'link', 'photos');
for (var i = 0; i < classes.length; ++i)
{
$('.btn_add_' + classes[i]).click(
function()
{
for (var j = 0; j < classes.length; ++j)
{
if (this.hasClass('btn_add_' + classes[j]))
{
$('.block_' + classes[j]).toggle();
}
else
{
$('.block_' + classes[j]).hide();
}
}
});
}
You could make this code more elegant by not assigning those elements classes like btn_add_event, but give them two classes: btn_add and event, or even resort to giving them id's. My solution is based on your description of your current html.
Here is what I think is a nice flexible and performant function. It assumes you can contain your links and html blocks in a parent, but otherwise it uses closures to precalculate the elements involved, so a click is super-fast.
<html>
<head>
<script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.6.2/jquery.min.js" ></script>
<script type="text/javascript">
// Enables show/hide functionality on click.
// The elements within 'container' matching the selector 'blocks' are hidden
// When elements within 'container' matching the selector 'clicker' are clicked
// their attribute with the name 'clickerAttr' is appended to the selector
// 'subject' to identify a target, usually one of the 'blocks'. All blocks
// except the target are hidden. The target is shown.
//
// Change clickerAttr from 'linkTarget' to 'id' if you want XHTML compliance
//
// container: grouping of related elements for which to enable this functionality
// clicker: selector to element type that when clicked triggers the show/hide functionality
// clickerAttr: name of the DOM attribute that will be used to adapt the 'subject' selector
// blocks: selector to the html blocks that will be shown or hidden when the clicker is clicked
// subject: root of the selector to be used to identify the one html block to be shown
//
function initToggle(container,clicker,clickerAttr,blocks,subject) {
$(container).each(
function(idx,instance) {
var containerElement = $(instance);
var containedBlocks = containerElement.find(blocks);
containerElement.find(clicker).each(function(idxC, instanceClicker) {
var tgtE = containerElement.find(subject+instanceClicker.getAttribute(clickerAttr));
var clickerBlocks = containedBlocks.not(tgtE);
$(instanceClicker).click(function(event) {
clickerBlocks.hide();
tgtE.toggle();
});
});
// initially cleared
containedBlocks.hide();
}
);
}
$(function() {
initToggle('.toggle','a.link','linkTarget','div.block','div.');
});
</script>
</head>
<body>
Example HTML block toggle:
<div class="toggle">
a <br />
b <br />
c <br />
<div class="A block"> A </div>
<div class="B block"> B </div>
<div class="C block"> C </div>
</div> <!-- toggle -->
This next one is not enabled, to show scoping.
<div class="toggle2">
a <br />
<div class="A block">A</div>
</div> <!-- toggle2 -->
This next one is enabled, to show use in multiple positions on a page, such as in a portlet library.
<div class="toggle">
a <br />
<div class="A block">A</div>
</div> <!-- toggle (2) -->
</body>
</html>

Categories