In JavaScript I have a JSON array like this:
var r = [{"name":"a","bool":false},{"name":"b","bool":false},
{"name":"c","bool":false},{"name":"a","bool":false},
{"name":"b","bool":false},{"name":"c","bool":true},
{"name":"a","bool":true}];
I want to build another array containing all the objects where name=="a" and bool==false. I solved this by looping, but I wanted to know if there is another way to do it.
How can I do?
[edit]
My loop was:
var rLen = r.length;
var newArray = [];
for(var i=0;i<rLen;i++) {
if(r[i].name=="a"&&r[i].bool==false) {
newArray.push(r[i]);
}
}
In the end it will always be solved by loops internally, e.g.
var r = [{"name":"a","bool":false},{"name":"b","bool":false},
{"name":"c","bool":false},{"name":"a","bool":false},
{"name":"b","bool":false},{"name":"c","bool":true},
{"name":"a","bool":true}];
var result = r.filter(function(item){
return item.name === 'a' && !item.bool;
});
If you look at the polyfill, you'll notice the loop:
if (!Array.prototype.filter) {
Array.prototype.filter = function(fun/*, thisArg*/) {
'use strict';
if (this === void 0 || this === null) {
throw new TypeError();
}
var t = Object(this);
var len = t.length >>> 0;
if (typeof fun !== 'function') {
throw new TypeError();
}
var res = [];
var thisArg = arguments.length >= 2 ? arguments[1] : void 0;
for (var i = 0; i < len; i++) { // <--
if (i in t) {
var val = t[i];
// NOTE: Technically this should Object.defineProperty at
// the next index, as push can be affected by
// properties on Object.prototype and Array.prototype.
// But that method's new, and collisions should be
// rare, so use the more-compatible alternative.
if (fun.call(thisArg, val, i, t)) {
res.push(val);
}
}
}
return res;
};
}
Since you're interested in performance, here is a jsperf comparing the two: http://jsperf.com/aarontgrogg-array-filter-vs-for-loop
may be
var r1 = r.filter(function(item){ return item.name === "a" && !item.bool; });
I found some possible solutions on this site but none of them really helped me forward.
My array looks like this:
[
{"customerName":"Atelier graphique","addressLine1":"54, rue Royale"},
{"customerName":"Signal Gift Stores","addressLine1":"8489 Strong St."},
etc, etc
I want to change the customerName to value and addressLine1 to data. I tried the following but I am doing something wrong here.
var myArray = [];
$(document).ready(function () {
$("#text-id").on( 'click', function () {
$.ajax({
type: 'post',
url: 'connect.php',
success: function( data ) {
console.log( data );
myArray.push(data);
}
});
});
function DumpCustomers() {
for(i=0;i<myArray.length; i++){
myArray[i].addressLine1= "data";
delete myArray[i].addressLine1;
myArray[i].customerName= "value";
delete myArray[i].customerName;
}
alert(myArray);
}
Just use Array.map to project your array values to the desired type:
var myTransformedArray = myOriginalArray.map(function(item){
return {
value : item.customerName,
data : item.addressLine1
};
});
If you need to support old browsers, you may need to add a polyfill to patch over the absence of a map function. The link above supplies this ECMA-262 5th Edition compliant implementation:
if (!Array.prototype.map) {
Array.prototype.map = function(callback, thisArg) {
var T, A, k;
if (this == null) {
throw new TypeError(" this is null or not defined");
}
var O = Object(this);
var len = O.length >>> 0;
if (typeof callback !== "function") {
throw new TypeError(callback + " is not a function");
}
if (arguments.length > 1) {
T = thisArg;
}
A = new Array(len);
k = 0;
while (k < len) {
var kValue, mappedValue;
if (k in O) {
kValue = O[k];
mappedValue = callback.call(T, kValue, k, O);
A[k] = mappedValue;
}
k++;
}
return A;
};
}
You weren't that far off, but ask yourself, what does this line do:
myArray[i].addressLine1= "data";
? Right — it sets the value of the myArray[i].addressLine1 property to "data". That's not what you want. :-) You want to add a new property called data to myArray[i] and give it the value currently in myArray[i].addressLine1. You do that by assigning to the new property name:
myArray[i].data = myArray[i].addressLine1;
E.g.:
function DumpCustomers() {
var i;
for(i=0;i<myArray.length; i++){
myArray[i].data = myArray[i].addressLine1; // Change here
delete myArray[i].addressLine1;
myArray[i].value = myArray[i].customerName; // And here
delete myArray[i].customerName;
}
alert(myArray);
}
...and at some point, you'll need to have code calling DumpCustomers, or move the part changing the property names into your success handler instead.
Note that I added var i at the top. Your code was falling prey to The Horror of Implicit Globals without it.
That said, if these are the only two properties in the array entries, I'd probably go with map per spender's answer, or do something like your loop but completely replacing the entries rather than modifying them:
function DumpCustomers() {
var i;
for(i=0;i<myArray.length; i++){
myArray[i] = {
data: myArray[i].addressLine1,
value: myArray[i].customerName
};
}
alert(myArray);
}
Try to make a new Array :)
Like this:
var myArray = [
{"customerName":"Atelier graphique","addressLine1":"54, rue Royale"},
{"customerName":"Signal Gift Stores","addressLine1":"8489 Strong St."}
],
newArray = [];
for(var i = 0, len = myArray.length; i < len; i++)
{
newArray.push({'value': myArray[i]['customerName'], 'data': myArray[i]['addressLine1']});
}
myArray = newArray;
I came to know that in IE8 array filter function is not supported.
After looking for help on internet I found this - https://developer.mozilla.org/en-US/docs/JavaScript/Reference/Global_Objects/Array/filter
It suggest that IE8 will work using above code.
HTML Code:
<body>
Calculate
</body>
JS Code:
function calculateDiff() {
var arr1 = new Array(1, 2, 3);
var arr2 = new Array(3, 4, 5);
var res = arr1.diff(arr2);
alert(res);
}
Array.prototype.diff = function(a) {
if(!Array.prototype.filter) {
alert("not supported");
Array.prototype.filter = function(fun) {
"use strict";
if(this == null)
throw new TypeError();
var t = Object(this);
var len = t.length >>> 0;
if(typeof fun != "function")
throw new TypeError();
var res = [];
var thisp = arguments[1];
for(var i = 0; i < len; i++) {
if(i in t) {
var val = t[i]; // in case fun mutates this
if (fun.call(thisp, val, i, t))
res.push(val);
}
}
return res;
};
}
else {
alert("supported");
return this.filter(function(i) {
return !(a.indexOf(i) > -1);
});
}
}
I have implemented the solution in this fiddle - http://jsfiddle.net/7LFMA/
What is wrong in the code? Why doesn't it work ?
When running diff for the first time, it will only alert "Not Supported", install the filter polyfill but do nothing. It just returns undefined, instead of diffing like it is supposed to do.
Remove the else, or better just move the filter installation outside the diff function - it is not to be a part of it (e.g. in terms of closure, though modern engines will care about this).
Also, IE8 does not support the indexOf method, you will need to put this compat shim in as well.
if (!Array.prototype.indexOf)
Array.prototype.indexOf = function (searchElement) {…};
if (!Array.prototype.filter)
Array.prototype.filter = function(fun) {…};
Array.prototype.diff = function(a) {
return this.filter(function(i) {
return !(a.indexOf(i) > -1);
});
};
function calculateDiff() {
var arr1 = new Array(1, 2, 3);
var arr2 = new Array(3, 4, 5);
var res = arr1.diff(arr2);
alert(res);
}
IE8 does not support indexOf for arrays - you still use it in the code so once you implement filter, it DOES exist and then IE8 will try to use indexOf.
In your code you do not actually APPLY the filter once you call DIFF but once you do that, you also need to implement indexOf
MDN Array indexOf
Given the following form:
<form>
<input name="foo" value="bar">
<input name="hello" value="hello world">
</form>
I can use the $.param( .. ) construct to serialize the form:
$.param( $('form input') )
=> foo=bar&hello=hello+world
How can I deserialize the above String with JavaScript and get a hash back?
For example,
$.magicFunction("foo=bar&hello=hello+world")
=> {'foo' : 'bar', 'hello' : 'hello world'}
Reference: jQuery.param( obj ).
You should use jQuery BBQ's deparam function. It's well-tested and documented.
This is a slightly modified version of a function I wrote a while ago to do something similar.
var QueryStringToHash = function QueryStringToHash (query) {
var query_string = {};
var vars = query.split("&");
for (var i=0;i<vars.length;i++) {
var pair = vars[i].split("=");
pair[0] = decodeURIComponent(pair[0]);
pair[1] = decodeURIComponent(pair[1]);
// If first entry with this name
if (typeof query_string[pair[0]] === "undefined") {
query_string[pair[0]] = pair[1];
// If second entry with this name
} else if (typeof query_string[pair[0]] === "string") {
var arr = [ query_string[pair[0]], pair[1] ];
query_string[pair[0]] = arr;
// If third or later entry with this name
} else {
query_string[pair[0]].push(pair[1]);
}
}
return query_string;
};
How about this short functional approach?
function parseParams(str) {
return str.split('&').reduce(function (params, param) {
var paramSplit = param.split('=').map(function (value) {
return decodeURIComponent(value.replace(/\+/g, ' '));
});
params[paramSplit[0]] = paramSplit[1];
return params;
}, {});
}
Example:
parseParams("this=is&just=an&example") // Object {this: "is", just: "an", example: undefined}
My answer:
function(query){
var setValue = function(root, path, value){
if(path.length > 1){
var dir = path.shift();
if( typeof root[dir] == 'undefined' ){
root[dir] = path[0] == '' ? [] : {};
}
arguments.callee(root[dir], path, value);
}else{
if( root instanceof Array ){
root.push(value);
}else{
root[path] = value;
}
}
};
var nvp = query.split('&');
var data = {};
for( var i = 0 ; i < nvp.length ; i++ ){
var pair = nvp[i].split('=');
var name = decodeURIComponent(pair[0]);
var value = decodeURIComponent(pair[1]);
var path = name.match(/(^[^\[]+)(\[.*\]$)?/);
var first = path[1];
if(path[2]){
//case of 'array[level1]' || 'array[level1][level2]'
path = path[2].match(/(?=\[(.*)\]$)/)[1].split('][')
}else{
//case of 'name'
path = [];
}
path.unshift(first);
setValue(data, path, value);
}
return data;
}
I am using David Dorward's answer, and realized that it doesn't behave like PHP or Ruby on Rails how they parse the params:
1) a variable is only an array if it ends with [], such as ?choice[]=1&choice[]=12, not when it is ?a=1&a=2
2) when mulitple params exist with the same name, the later ones replaces the earlier ones, as on PHP servers (Ruby on Rails keep the first one and ignore the later ones), such as ?a=1&b=2&a=3
So modifying David's version, I have:
function QueryStringToHash(query) {
if (query == '') return null;
var hash = {};
var vars = query.split("&");
for (var i = 0; i < vars.length; i++) {
var pair = vars[i].split("=");
var k = decodeURIComponent(pair[0]);
var v = decodeURIComponent(pair[1]);
// If it is the first entry with this name
if (typeof hash[k] === "undefined") {
if (k.substr(k.length-2) != '[]') // not end with []. cannot use negative index as IE doesn't understand it
hash[k] = v;
else
hash[k.substr(0, k.length-2)] = [v];
// If subsequent entry with this name and not array
} else if (typeof hash[k] === "string") {
hash[k] = v; // replace it
// If subsequent entry with this name and is array
} else {
hash[k.substr(0, k.length-2)].push(v);
}
}
return hash;
};
which is tested fairly thoroughly.
I know this is an old thread, but maybe there is still some relevance in it?
Inspired by Jacky Li's good solution I tried a slight variation of my own with the objective to also be able to take care of arbitrary combinations of arrays and objects as input. I looked at how PHP would have done it and tried to get something "similar" going. Here is my code:
function getargs(str){
var ret={};
function build(urlnam,urlval,obj){ // extend the return object ...
var i,k,o=obj, x, rx=/\[([^\]]*)\]/g, idx=[urlnam.replace(rx,'')];
while (x=rx.exec(urlnam)) idx.push(x[1]);
while(true){
k=idx.shift();
if(k.trim()=='') {// key is empty: autoincremented index
if (o.constructor.name=='Array') k=o.length; // for Array
else if (o===obj ) {k=null} // for first level property name
else {k=-1; // for Object
for(i in o) if (+i>k) k=+i;
k++;
}
}
if(idx.length) {
// set up an array if the next key (idx[0]) appears to be
// numeric or empty, otherwise set up an object:
if (o[k]==null || typeof o[k]!='object') o[k]=isNaN(idx[0])?{}:[];
o=o[k]; // move on to the next level
}
else { // OK, time to store the urlval in its chosen place ...
// console.log('key',k,'val',urlval);
o[k]=urlval===""?null:urlval; break; // ... and leave the while loop.
}
}
return obj;
}
// ncnvt: is a flag that governs the conversion of
// numeric strings into numbers
var ncnvt=true,i,k,p,v,argarr=[],
ar=(str||window.location.search.substring(1)).split("&"),
l=ar.length;
for (i=0;i<l;i++) {if (ar[i]==="") continue;
p=ar[i].split("=");k=decodeURIComponent(p[0]);
v=p[1];v=(v!=null)?decodeURIComponent(v.replace(/\+/g,'%20')):'';
if (ncnvt && v.trim()>"" && !isNaN(v)) v-=0;
argarr.push([k,v]); // array: key-value-pairs of all arguments
}
for (i=0,l=argarr.length;i<l;i++) build(argarr[i][0],argarr[i][1],ret);
return ret;
}
If the function is called without the str-argument it will assume window.location.search.slice(1) as input.
Some examples:
['a=1&a=2', // 1
'x[y][0][z][]=1', // 2
'hello=[%22world%22]&world=hello', // 3
'a=1&a=2&&b&c=3&d=&=e&', // 4
'fld[2][]=2&fld[][]=3&fld[3][]=4&fld[]=bb&fld[]=cc', // 5
$.param({a:[[1,2],[3,4],{aa:'one',bb:'two'},[5,6]]}), // 6
'a[]=hi&a[]=2&a[3][]=7&a[3][]=99&a[]=13',// 7
'a[x]=hi&a[]=2&a[3][]=7&a[3][]=99&a[]=13'// 8
].map(function(v){return JSON.stringify(getargs(v));}).join('\n')
results in
{"a":2} // 1
{"x":{"y":[{"z":[1]}]}} // 2
{"hello":"[\"world\"]","world":"hello"} // 3
{"a":2,"b":null,"c":3,"d":null,"null":"e"} // 4 = { a: 2, b: null, c: 3, d: null, null: "e" }
{"fld":[null,null,[2],[3,4],"bb","cc"]} // 5
{"a":[[1,2],[3,4],{"aa":"one","bb":"two"},[5,6]]} // 6
{"a":["hi",2,null,[7,99],13]} // 7
{"a":{"0":2,"3":[7,99],"4":13,"x":"hi"}} // 8
Whereas Jacky Li's solution would produce the outer container for a as a plain object
{a:{"0":["1","2"],"1":["3","4"],"2":["5","6"]}} // 6: JackyLi's output
getargs() looks at the first given index for any level to determine whether this level will be an object (non-numeric index) or an array (numeric or empty), thus resulting in the output as shown in the listing bove (no. 6).
If the current object is an array then nulls get inserted wherever necessary to represent empty positions. Arrays are always consecutively numbered and 0-based).
Note, that in the example no. 8 the "autoincrement" for empty indices still works, even though we are dealing with an object now and not an array.
As far as I have tested it, my getargs() behaves pretty much identically to Chriss Roger's great jQuery $.deparam() plugin mentioned in the accepted answer. The main difference is that getargs runs without jQuery and that it does autoincrement in objects while $.deparam() will not do that:
JSON.stringify($.deparam('a[x]=hi&a[]=2&a[3][]=7&a[3][]=99&a[]=13').a);
results in
{"3":["7","99"],"x":"hi","undefined":"13"}
In $.deparam() the index [] is interpreted as an undefined instead of an autoincremented numerical index.
Here's how you could create a new jQuery function:
jQuery.unparam = function (value) {
var
// Object that holds names => values.
params = {},
// Get query string pieces (separated by &)
pieces = value.split('&'),
// Temporary variables used in loop.
pair, i, l;
// Loop through query string pieces and assign params.
for (i = 0, l = pieces.length; i < l; i++) {
pair = pieces[i].split('=', 2);
// Repeated parameters with the same name are overwritten. Parameters
// with no value get set to boolean true.
params[decodeURIComponent(pair[0])] = (pair.length == 2 ?
decodeURIComponent(pair[1].replace(/\+/g, ' ')) : true);
}
return params;
};
Thanks to him http://james.padolsey.com/javascript/parsing-urls-with-the-dom/
Pretty easy :D
function params_unserialize(p){
var ret = {},
seg = p.replace(/^\?/,'').split('&'),
len = seg.length, i = 0, s;
for (;i<len;i++) {
if (!seg[i]) { continue; }
s = seg[i].split('=');
ret[s[0]] = s[1];
}
return ret;}
This is really old question, but as i have coming - other people may coming to this post, and i want to a bit refresh this theme. Today no need to make custom solutions - there is URLSearchParams interface.
var paramsString = "q=URLUtils.searchParams&topic=api";
var searchParams = new URLSearchParams(paramsString);
//Iterate the search parameters.
for (let p of searchParams) {
console.log(p);
}
The only one limitation i know - this feature not supported in IE / Edge.
Here's my JavaScript implementation which I use in a server-side JScript ASP Classic page (demo):
// Transforms a query string in the form x[y][0][z][]=1 into {x:{y:[{z:[1]}]}}
function parseJQueryParams(p) {
var params = {};
var pairs = p.split('&');
for (var i=0; i<pairs.length; i++) {
var pair = pairs[i].split('=');
var indices = [];
var name = decodeURIComponent(pair[0]),
value = decodeURIComponent(pair[1]);
var name = name.replace(/\[([^\]]*)\]/g,
function(k, idx) { indices.push(idx); return ""; });
indices.unshift(name);
var o = params;
for (var j=0; j<indices.length-1; j++) {
var idx = indices[j];
var nextIdx = indices[j+1];
if (!o[idx]) {
if ((nextIdx == "") || (/^[0-9]+$/.test(nextIdx)))
o[idx] = [];
else
o[idx] = {};
}
o = o[idx];
}
idx = indices[indices.length-1];
if (idx == "") {
o.push(value);
}
else {
o[idx] = value;
}
}
return params;
}
I came up with this solution, which behaves like the .Net function HttpUtility.ParseQueryString.
In the result, the query string parameters are store in properties as lists of values, so that qsObj["param"] will be the same as calling GetValues("param") in .Net.
I hope you like it. JQuery not required.
var parseQueryString = function (querystring) {
var qsObj = new Object();
if (querystring) {
var parts = querystring.replace(/\?/, "").split("&");
var up = function (k, v) {
var a = qsObj[k];
if (typeof a == "undefined") {
qsObj[k] = [v];
}
else if (a instanceof Array) {
a.push(v);
}
};
for (var i in parts) {
var part = parts[i];
var kv = part.split('=');
if (kv.length == 1) {
var v = decodeURIComponent(kv[0] || "");
up(null, v);
}
else if (kv.length > 1) {
var k = decodeURIComponent(kv[0] || "");
var v = decodeURIComponent(kv[1] || "");
up(k, v);
}
}
}
return qsObj;
};
Here is how to use it:
var qsObj = parseQueryString("a=1&a=2&&b&c=3&d=&=e&");
To preview the result in the console juste type in:
JSON.stringify(qsObj)
Output:
"{"a":["1","2"],"null":["","b",""],"c":["3"],"d":[""],"":["e"]}"
There's a beautiful one-liner over at CSS-Tricks (original source from Nicholas Ortenzio):
function getQueryParameters(str) {
return (str || document.location.search).replace(/(^\?)/,'').split("&").map(function(n){return n = n.split("="),this[n[0]] = n[1],this}.bind({}))[0];
}
The really clever part is how it uses the anonymous function's this object, adding a key/value pair for each of the queries in the string. That said, there's some room for improvement. I've modified it a bit below, with the following changes:
Added handling of empty strings and non-string input.
Handled URI-encoded strings (%40->#, etc).
Removed the default use of document.location.search when the input was empty.
Changed the name, made it more readable, added comments.
function deparam(str) {
// Uses an empty 'this' to build up the results internally
function splitQuery(query) {
query = query.split('=').map(decodeURIComponent);
this[query[0]] = query[1];
return this;
}
// Catch bad input
if (!str || !(typeof str === 'string' || str instanceof String))
return {};
// Split the string, run splitQuery on each piece, and return 'this'
var queries = str.replace(/(^\?)/,'').split('&');
return queries.map(splitQuery.bind({}))[0];
}
use this :
// convert query string to json object
var queryString = "cat=3&sort=1&page=1";
queryString
.split("&")
.forEach((item) => {
const prop = item.split("=");
filter[prop[0]] = prop[1];
});
console.log(queryString);
This is my version in Coffeescript.
Also works for url like
http://localhost:4567/index.html?hello=[%22world%22]&world=hello#/home
getQueryString: (url)->
return null if typeof url isnt 'string' or url.indexOf("http") is -1
split = url.split "?"
return null if split.length < 2
path = split[1]
hash_pos = path.indexOf "#"
path = path[0...hash_pos] if hash_pos isnt -1
data = path.split "&"
ret = {}
for d in data
[name, val] = d.split "="
name = decodeURIComponent name
val = decodeURIComponent val
try
ret[name] = JSON.parse val
catch error
ret[name] = val
return ret
Here's a simple & compact one if you only want to quickly get the parameters from a GET request:
function httpGet() {
var a={},b,i,q=location.search.replace(/^\?/,"").split(/\&/);
for(i in q) if(q[i]) {b=q[i].split("=");if(b[0]) a[b[0]]=
decodeURIComponent(b[1]).replace(/\+/g," ");} return a;
}
It converts
something?aa=1&bb=2&cc=3
into an object like
{aa:1,bb:2,cc:3}
Creates a serialized representation of an array or object (can be used as URL query string for AJAX requests).
<button id='param'>GET</button>
<div id="show"></div>
<script>
$('#param').click(function () {
var personObj = new Object();
personObj.firstname = "vishal"
personObj.lastname = "pambhar";
document.getElementById('show').innerHTML=$.param(`personObj`));
});
</script>
output:firstname=vishal&lastname=pambhar
answers could use a bit of jQuery elegance:
(function($) {
var re = /([^&=]+)=?([^&]*)/g;
var decodeRE = /\+/g; // Regex for replacing addition symbol with a space
var decode = function (str) {return decodeURIComponent( str.replace(decodeRE, " ") );};
$.parseParams = function(query) {
var params = {}, e;
while ( e = re.exec(query) ) {
var k = decode( e[1] ), v = decode( e[2] );
if (k.substring(k.length - 2) === '[]') {
k = k.substring(0, k.length - 2);
(params[k] || (params[k] = [])).push(v);
}
else params[k] = v;
}
return params;
};
})(jQuery);
fork at https://gist.github.com/956897
You can use the function .serializeArray() (Link) of jQuery itself. This function returns an array of key-value pair. Result example:
[
{ name: "id", value: "1" },
{ name: "version", value: "100" }
]