How is randomness achieved with Math.random in javascript? - javascript

How is randomness achieved with Math.random in javascript? I've made something that picks between around 50 different options randomly. I'm wondering how comfortable I should be with using Math.random to get my randomness.

From the specifications:
random():
Returns a Number value with positive
sign, greater than or equal to 0 but
less than 1, chosen randomly or pseudo
randomly with approximately uniform
distribution over that range, using an
implementation-dependent algorithm or
strategy. This function takes no
arguments.
So the answer is that it depends on what JavaScript engine you're using.
I'm not sure if all browsers use the same strategy or what that strategy is unfortunately
It should be fine for your purposes. Only if you're doing a large amount of numbers would you begin to see a pattern

Using Math.random() is fine if you're not centrally pooling & using the results, i.e. for OAuth.
For example, our site used Math.random() to generate random "nonce" strings for use with OAuth. The original JavaScript library did this by choosing a character from a predetermined list using Math.random(): i.e.
for (var i = 0; i < length; ++i) {
var rnum = Math.floor(Math.random() * chars.length);
result += chars.substring(rnum, rnum+1);
}
The problem is, users were getting duplicate nonce strings (even using a 10 character length - theoretically ~10^18 combinations), usually within a few seconds of each other. My guess this is due to Math.random() seeding from the timestamp, as one of the other posters mentioned.

The exact implementation can of course differ somewhat depending on the browser, but they all use some kind of pseudo random number generator. Although it's not really random, it's certainly good enough for all general purposes.
You should only be worried about the randomness if you are using it for something that needs exceptionally good randomness, like encryption or simulating a game of chance in play for money, but then you would hardly use Javascript anyway.

It's 100% random enough for your purposes. It's seeded by time, so every time you run it, you'll get different results.
Paste this into your browsers address bar...
javascript:alert(Math.random() * 2 > 1);
and press [Enter] a few times... I got "true, false, false, true" - random enough :)

This is a little overkill...but, I couldn't resist doing this :)
You can execute this in your browser address bar. It generates a random number between 0 and 4, 100000 times. And outputs the number of times each number was generated and the number of times one random number followed the other.
I executed this in Firefox 3.5.2. All the numbers seem to be about equal - indicating no bias, and no obvious pattern in the way the numbers are generated.
javascript:
var max = 5;
var transitions = new Array(max);
var frequency = new Array(max);
for (var i = 0; i < max; i++)
{
transitions[i] = new Array(max);
}
var old = 0, curr = 0;
for (var i = 0; i < 100000; i++)
{
curr = Math.floor(Math.random()*max);
if (frequency[curr] === undefined)
{
frequency[curr] = -1;
}
frequency[curr] += 1;
if (transitions[old][curr] === undefined)
{
transitions[old][curr] = -1;
}
transitions[old][curr] += 1;
old = curr;
}
alert(frequency);
alert(transitions);

Related

Random number in JavaScript per day once

I'm in the process of coding an application that does the following:
Generates a random number with 4 digits.
Changes it once per calendar day.
Won't change that full day. Only once in a day.
I tried:
function my_doubt()
{
var place = document.getElementById("my_div")
place.innerHTML=Math.floor((Math.random()*100)+1);
}
I'm getting a random number with Math.random(). However, I'm rather clueless about how to generate a different number for each day. What are some common approaches for tackling this problem?
Note: It doesn't have to be really random. A pseudo - random number is also OK.
You need to seed the random number generator with a number derived from the current date, for example "20130927" for today.
You haven't been clear about your requirements, so I don't know how random you need (do you have requirements for how uniform of a distribution you need?).
This will generate a random looking 4 digit number which may be good enough for your requirements, but if you perform an analysis you'll find the number isn't actually very random:
function rand_from_seed(x, iterations){
iterations = iterations || 100;
for(var i = 0; i < iterations; i++)
x = (x ^ (x << 1) ^ (x >> 1)) % 10000;
return x;
}
var random = rand_from_seed(~~((new Date)/86400000)); // Seed with the epoch day.
Now that your question is a bit more reasonable, clear and nicer in tone. I can give you a way to get the same result on the client-side. However as others mentioned, to maintain consistency, you probably want to maintain the number on the server to ensure consistency.
var oneDayInMs = 1000*60*60*24;
var currentTimeInMs = new Date().getTime(); // UTC time
var timeInDays = Math.floor(currentTimeInMs / oneDayInMs);
var numberForToday = timeInDays % 9999;
console.log(numberForToday);
// zero-filling of numbers less than four digits might be optional for you
// zero-filled value will be a string to maintain its leading 0s
var fourDigitNumber = numberForToday.toString();
while(fourDigitNumber.length < 4)
{
fourDigitNumber = 0+fourDigitNumber;
}
console.log(fourDigitNumber);
// remember that this number rotates every and is unique for 10000 days
1)create a random number in javascript
2)store in cookie that will expire after one day
3)get value from cookie, if it does not exist goto 1

How to actually calculate if parity is even or odd?

I am working on an implementation of the 15-pieces-sliding puzzle, and I am stuck at the point were I must make sure I only shuffle into "solvable permutations" - in my case with the empty tile in the down right corner: even permutations.
I have read many similar threads such as How can I ensure that when I shuffle my puzzle I still end up with an even permutation? and understand that I need to "count the parity of the number of inversions in the permutation".
I am writing in Javascript, and using Fischer-Yates-algorithm to randomize my numbers:
var allNrs = [0,1,2,3,4,5,6,7,8,9,10,11,12,13,14];
for (var i = allNrs.length - 1; i > 0; i--) {
var j = Math.floor(Math.random() * (i + 1));
var temp1 = allNrs[i];
var temp2 = allNrs[j];
allNrs[i] = temp2;
allNrs[j] = temp1;
}
How do I actually caculate this permutation or parity value that I have read about in so many posts?
Just count the number of swaps you're making. If the number of swaps is even then the permutation has an even parity.
For example, these are the even permutations for 3 numbers. Note that you need 0 or 2 swaps to get to them from [1,2,3]:
1,2,3
2,3,1
3,1,2
Each swap of two numbers you do flips the parity. If you have an even number of them, you are good. If you have an odd number, you are not.
This is essentially what parity means and it is a (simple) theorem of group theory that any two ways to get to the same shuffle have the same parity.

creating a simple one-way hash

Are there any standard hash functions/methods that maps an arbitrary 9 digit integer into another (unique) 9 digit integer, such that it is somewhat difficult to map back (without using brute force).
Hashes should not collide, so every output 1 ≤ y < 10^9 needs to be mapped from one and only one input value in 1 ≤ x < 10^9.
The problem you describe is really what Format-Preserving Encryption aims to solve.
One standard is currently being worked out by NIST: the new FFX mode of encryption for block ciphers.
It may be more complex than what you expected though. I cannot find any implementation in Javascript, but some examples exist in other languages: here (Python) or here (C++).
You are requiring a non-colliding hash function with only about 30 bits. That's going to be a tall order for any hash function. Actually, what you need is not a Pseudo Random Function such as a hash but a Pseudo Random Permutation.
You could use an encryption function for this, but you would obviously need to keep the key secret. Furthermore, encryption functions normally bits as input and output, and 10^9 is not likely to use an exact number of bits. So if you are going for such an option you may have to use format preserving encryption.
You may also use any other function that is a PRP within the group 0..10^9-1 (after decrementing the value with 1), but if an attacker finds out what parameters you are using then it becomes really simple to revert back to the original. An example would be a multiplication with a number that is relatively prime with 10^9-1, modulo 10^9-1.
This is what i can come up with:
var used = {};
var hash = function (num) {
num = md5(num);
if (used[num] !== undefined) {
return used[num];
} else {
var newNum;
do {
newNum = Math.floor(Math.random() * 1000000000) + 1;
} while (contains(newNum))
used[num] = newNum;
return newNum;
}
};
var contains = function (num) {
for (var i in used) {
if (used[i] === num) {
return true;
}
}
return false;
};
var md5 = function (num) {
//method that return an md5 (or any other) hash
};
I should note however that it will run into problems when you try to hash a lot of different numbers because the do..while will produce random numbers and compare them with already generated numbers. If you have already generated a lot of numbers it will get more and more unlikely to find the remaining ones.

Textual input to seeded random

How would I take a textual input from the user (anything their keyboard would allow them to type), and transfer it to a number?
From there, I would probably take that number, and feed it into a seeded random number generator.
I'm getting the idea from Minecraft's random seed option, but I can't find anything on it.
There are probably more interesting algorithms but this just converts the characters to ints and multiplies it by the position in order to weight them (so that 'abc' is different than 'cba'). You could also use a hash function of some kind as well, but I thought that might be overkill for this purpose.
​
var input = 'askljfhasjfh', num = 0;
for (var i = 0, len = input.length; i < len; ++i) {
num += input.charCodeAt(i) * (i + 1);
}
console.log(num);
Keep in mind though, you can't seed the Math.random() function in Javascript, it always just uses the current date for the seed.

Is it correct to use JavaScript Array.sort() method for shuffling?

I was helping somebody out with his JavaScript code and my eyes were caught by a section that looked like that:
function randOrd(){
return (Math.round(Math.random())-0.5);
}
coords.sort(randOrd);
alert(coords);
My first though was: hey, this can't possibly work! But then I did some experimenting and found that it indeed at least seems to provide nicely randomized results.
Then I did some web search and almost at the top found an article from which this code was most ceartanly copied. Looked like a pretty respectable site and author...
But my gut feeling tells me, that this must be wrong. Especially as the sorting algorithm is not specified by ECMA standard. I think different sorting algoritms will result in different non-uniform shuffles. Some sorting algorithms may probably even loop infinitely...
But what do you think?
And as another question... how would I now go and measure how random the results of this shuffling technique are?
update: I did some measurements and posted the results below as one of the answers.
After Jon has already covered the theory, here's an implementation:
function shuffle(array) {
var tmp, current, top = array.length;
if(top) while(--top) {
current = Math.floor(Math.random() * (top + 1));
tmp = array[current];
array[current] = array[top];
array[top] = tmp;
}
return array;
}
The algorithm is O(n), whereas sorting should be O(n log n). Depending on the overhead of executing JS code compared to the native sort() function, this might lead to a noticable difference in performance which should increase with array sizes.
In the comments to bobobobo's answer, I stated that the algorithm in question might not produce evenly distributed probabilities (depending on the implementation of sort()).
My argument goes along these lines: A sorting algorithm requires a certain number c of comparisons, eg c = n(n-1)/2 for Bubblesort. Our random comparison function makes the outcome of each comparison equally likely, ie there are 2^c equally probable results. Now, each result has to correspond to one of the n! permutations of the array's entries, which makes an even distribution impossible in the general case. (This is a simplification, as the actual number of comparisons neeeded depends on the input array, but the assertion should still hold.)
As Jon pointed out, this alone is no reason to prefer Fisher-Yates over using sort(), as the random number generator will also map a finite number of pseudo-random values to the n! permutations. But the results of Fisher-Yates should still be better:
Math.random() produces a pseudo-random number in the range [0;1[. As JS uses double-precision floating point values, this corresponds to 2^x possible values where 52 ≤ x ≤ 63 (I'm too lazy to find the actual number). A probability distribution generated using Math.random() will stop behaving well if the number of atomic events is of the same order of magnitude.
When using Fisher-Yates, the relevant parameter is the size of the array, which should never approach 2^52 due to practical limitations.
When sorting with a random comparision function, the function basically only cares if the return value is positive or negative, so this will never be a problem. But there is a similar one: Because the comparison function is well-behaved, the 2^c possible results are, as stated, equally probable. If c ~ n log n then 2^c ~ n^(a·n) where a = const, which makes it at least possible that 2^c is of same magnitude as (or even less than) n! and thus leading to an uneven distribution, even if the sorting algorithm where to map onto the permutaions evenly. If this has any practical impact is beyond me.
The real problem is that the sorting algorithms are not guaranteed to map onto the permutations evenly. It's easy to see that Mergesort does as it's symmetric, but reasoning about something like Bubblesort or, more importantly, Quicksort or Heapsort, is not.
The bottom line: As long as sort() uses Mergesort, you should be reasonably safe except in corner cases (at least I'm hoping that 2^c ≤ n! is a corner case), if not, all bets are off.
It's never been my favourite way of shuffling, partly because it is implementation-specific as you say. In particular, I seem to remember that the standard library sorting from either Java or .NET (not sure which) can often detect if you end up with an inconsistent comparison between some elements (e.g. you first claim A < B and B < C, but then C < A).
It also ends up as a more complex (in terms of execution time) shuffle than you really need.
I prefer the shuffle algorithm which effectively partitions the collection into "shuffled" (at the start of the collection, initially empty) and "unshuffled" (the rest of the collection). At each step of the algorithm, pick a random unshuffled element (which could be the first one) and swap it with the first unshuffled element - then treat it as shuffled (i.e. mentally move the partition to include it).
This is O(n) and only requires n-1 calls to the random number generator, which is nice. It also produces a genuine shuffle - any element has a 1/n chance of ending up in each space, regardless of its original position (assuming a reasonable RNG). The sorted version approximates to an even distribution (assuming that the random number generator doesn't pick the same value twice, which is highly unlikely if it's returning random doubles) but I find it easier to reason about the shuffle version :)
This approach is called a Fisher-Yates shuffle.
I would regard it as a best practice to code up this shuffle once and reuse it everywhere you need to shuffle items. Then you don't need to worry about sort implementations in terms of reliability or complexity. It's only a few lines of code (which I won't attempt in JavaScript!)
The Wikipedia article on shuffling (and in particular the shuffle algorithms section) talks about sorting a random projection - it's worth reading the section on poor implementations of shuffling in general, so you know what to avoid.
I did some measurements of how random the results of this random sort are...
My technique was to take a small array [1,2,3,4] and create all (4! = 24) permutations of it. Then I would apply the shuffling function to the array a large number of times and count how many times each permutation is generated. A good shuffling algoritm would distribute the results quite evenly over all the permutations, while a bad one would not create that uniform result.
Using the code below I tested in Firefox, Opera, Chrome, IE6/7/8.
Surprisingly for me, the random sort and the real shuffle both created equally uniform distributions. So it seems that (as many have suggested) the main browsers are using merge sort. This of course doesn't mean, that there can't be a browser out there, that does differently, but I would say it means, that this random-sort-method is reliable enough to use in practice.
EDIT: This test didn't really measured correctly the randomness or lack thereof. See the other answer I posted.
But on the performance side the shuffle function given by Cristoph was a clear winner. Even for small four-element arrays the real shuffle performed about twice as fast as random-sort!
// The shuffle function posted by Cristoph.
var shuffle = function(array) {
var tmp, current, top = array.length;
if(top) while(--top) {
current = Math.floor(Math.random() * (top + 1));
tmp = array[current];
array[current] = array[top];
array[top] = tmp;
}
return array;
};
// the random sort function
var rnd = function() {
return Math.round(Math.random())-0.5;
};
var randSort = function(A) {
return A.sort(rnd);
};
var permutations = function(A) {
if (A.length == 1) {
return [A];
}
else {
var perms = [];
for (var i=0; i<A.length; i++) {
var x = A.slice(i, i+1);
var xs = A.slice(0, i).concat(A.slice(i+1));
var subperms = permutations(xs);
for (var j=0; j<subperms.length; j++) {
perms.push(x.concat(subperms[j]));
}
}
return perms;
}
};
var test = function(A, iterations, func) {
// init permutations
var stats = {};
var perms = permutations(A);
for (var i in perms){
stats[""+perms[i]] = 0;
}
// shuffle many times and gather stats
var start=new Date();
for (var i=0; i<iterations; i++) {
var shuffled = func(A);
stats[""+shuffled]++;
}
var end=new Date();
// format result
var arr=[];
for (var i in stats) {
arr.push(i+" "+stats[i]);
}
return arr.join("\n")+"\n\nTime taken: " + ((end - start)/1000) + " seconds.";
};
alert("random sort: " + test([1,2,3,4], 100000, randSort));
alert("shuffle: " + test([1,2,3,4], 100000, shuffle));
Interestingly, Microsoft used the same technique in their pick-random-browser-page.
They used a slightly different comparison function:
function RandomSort(a,b) {
return (0.5 - Math.random());
}
Looks almost the same to me, but it turned out to be not so random...
So I made some testruns again with the same methodology used in the linked article, and indeed - turned out that the random-sorting-method produced flawed results. New test code here:
function shuffle(arr) {
arr.sort(function(a,b) {
return (0.5 - Math.random());
});
}
function shuffle2(arr) {
arr.sort(function(a,b) {
return (Math.round(Math.random())-0.5);
});
}
function shuffle3(array) {
var tmp, current, top = array.length;
if(top) while(--top) {
current = Math.floor(Math.random() * (top + 1));
tmp = array[current];
array[current] = array[top];
array[top] = tmp;
}
return array;
}
var counts = [
[0,0,0,0,0],
[0,0,0,0,0],
[0,0,0,0,0],
[0,0,0,0,0],
[0,0,0,0,0]
];
var arr;
for (var i=0; i<100000; i++) {
arr = [0,1,2,3,4];
shuffle3(arr);
arr.forEach(function(x, i){ counts[x][i]++;});
}
alert(counts.map(function(a){return a.join(", ");}).join("\n"));
I have placed a simple test page on my website showing the bias of your current browser versus other popular browsers using different methods to shuffle. It shows the terrible bias of just using Math.random()-0.5, another 'random' shuffle that isn't biased, and the Fisher-Yates method mentioned above.
You can see that on some browsers there is as high as a 50% chance that certain elements will not change place at all during the 'shuffle'!
Note: you can make the implementation of the Fisher-Yates shuffle by #Christoph slightly faster for Safari by changing the code to:
function shuffle(array) {
for (var tmp, cur, top=array.length; top--;){
cur = (Math.random() * (top + 1)) << 0;
tmp = array[cur]; array[cur] = array[top]; array[top] = tmp;
}
return array;
}
Test results: http://jsperf.com/optimized-fisher-yates
I think it's fine for cases where you're not picky about distribution and you want the source code to be small.
In JavaScript (where the source is transmitted constantly), small makes a difference in bandwidth costs.
It's been four years, but I'd like to point out that the random comparator method won't be correctly distributed, no matter what sorting algorithm you use.
Proof:
For an array of n elements, there are exactly n! permutations (i.e. possible shuffles).
Every comparison during a shuffle is a choice between two sets of permutations. For a random comparator, there is a 1/2 chance of choosing each set.
Thus, for each permutation p, the chance of ending up with permutation p is a fraction with denominator 2^k (for some k), because it is a sum of such fractions (e.g. 1/8 + 1/16 = 3/16).
For n = 3, there are six equally-likely permutations. The chance of each permutation, then, is 1/6. 1/6 can't be expressed as a fraction with a power of 2 as its denominator.
Therefore, the coin flip sort will never result in a fair distribution of shuffles.
The only sizes that could possibly be correctly distributed are n=0,1,2.
As an exercise, try drawing out the decision tree of different sort algorithms for n=3.
There is a gap in the proof: If a sort algorithm depends on the consistency of the comparator, and has unbounded runtime with an inconsistent comparator, it can have an infinite sum of probabilities, which is allowed to add up to 1/6 even if every denominator in the sum is a power of 2. Try to find one.
Also, if a comparator has a fixed chance of giving either answer (e.g. (Math.random() < P)*2 - 1, for constant P), the above proof holds. If the comparator instead changes its odds based on previous answers, it may be possible to generate fair results. Finding such a comparator for a given sorting algorithm could be a research paper.
It is a hack, certainly. In practice, an infinitely looping algorithm is not likely.
If you're sorting objects, you could loop through the coords array and do something like:
for (var i = 0; i < coords.length; i++)
coords[i].sortValue = Math.random();
coords.sort(useSortValue)
function useSortValue(a, b)
{
return a.sortValue - b.sortValue;
}
(and then loop through them again to remove the sortValue)
Still a hack though. If you want to do it nicely, you have to do it the hard way :)
If you're using D3 there is a built-in shuffle function (using Fisher-Yates):
var days = ['Lundi','Mardi','Mercredi','Jeudi','Vendredi','Samedi','Dimanche'];
d3.shuffle(days);
And here is Mike going into details about it:
http://bost.ocks.org/mike/shuffle/
No, it is not correct. As other answers have noted, it will lead to a non-uniform shuffle and the quality of the shuffle will also depend on which sorting algorithm the browser uses.
Now, that might not sound too bad to you, because even if theoretically the distribution is not uniform, in practice it's probably nearly uniform, right? Well, no, not even close. The following charts show heat-maps of which indices each element gets shuffled to, in Chrome and Firefox respectively: if the pixel (i, j) is green, it means the element at index i gets shuffled to index j too often, and if it's red then it gets shuffled there too rarely.
These screenshots are taken from Mike Bostock's page on this subject.
As you can see, shuffling using a random comparator is severely biased in Chrome and even more so in Firefox. In particular, both have a lot of green along the diagonal, meaning that too many elements get "shuffled" somewhere very close to where they were in the original sequence. In comparison, a similar chart for an unbiased shuffle (e.g. using the Fisher-Yates algorithm) would be all pale yellow with just a small amount of random noise.
Here's an approach that uses a single array:
The basic logic is:
Starting with an array of n elements
Remove a random element from the array and push it onto the array
Remove a random element from the first n - 1 elements of the array and push it onto the array
Remove a random element from the first n - 2 elements of the array and push it onto the array
...
Remove the first element of the array and push it onto the array
Code:
for(i=a.length;i--;) a.push(a.splice(Math.floor(Math.random() * (i + 1)),1)[0]);
Can you use the Array.sort() function to shuffle an array – Yes.
Are the results random enough – No.
Consider the following code snippet:
/*
* The following code sample shuffles an array using Math.random() trick
* After shuffling, the new position of each item is recorded
* The process is repeated 100 times
* The result is printed out, listing each item and the number of times
* it appeared on a given position after shuffling
*/
var array = ["a", "b", "c", "d", "e"];
var stats = {};
array.forEach(function(v) {
stats[v] = Array(array.length).fill(0);
});
var i, clone;
for (i = 0; i < 100; i++) {
clone = array.slice();
clone.sort(function() {
return Math.random() - 0.5;
});
clone.forEach(function(v, i) {
stats[v][i]++;
});
}
Object.keys(stats).forEach(function(v, i) {
console.log(v + ": [" + stats[v].join(", ") + "]");
});
Sample output:
a: [29, 38, 20, 6, 7]
b: [29, 33, 22, 11, 5]
c: [17, 14, 32, 17, 20]
d: [16, 9, 17, 35, 23]
e: [ 9, 6, 9, 31, 45]
Ideally, the counts should be evenly distributed (for the above example, all counts should be around 20). But they are not. Apparently, the distribution depends on what sorting algorithm is implemented by the browser and how it iterates the array items for sorting.
There is nothing wrong with it.
The function you pass to .sort() usually looks something like
function sortingFunc( first, second )
{
// example:
return first - second ;
}
Your job in sortingFunc is to return:
a negative number if first goes before second
a positive number if first should go after second
and 0 if they are completely equal
The above sorting function puts things in order.
If you return -'s and +'s randomly as what you have, you get a random ordering.
Like in MySQL:
SELECT * from table ORDER BY rand()

Categories