Related
How to detect the Internet connection is offline in JavaScript?
Almost all major browsers now support the window.navigator.onLine property, and the corresponding online and offline window events. Run the following code snippet to test it:
console.log('Initially ' + (window.navigator.onLine ? 'on' : 'off') + 'line');
window.addEventListener('online', () => console.log('Became online'));
window.addEventListener('offline', () => console.log('Became offline'));
document.getElementById('statusCheck').addEventListener('click', () => console.log('window.navigator.onLine is ' + window.navigator.onLine));
<button id="statusCheck">Click to check the <tt>window.navigator.onLine</tt> property</button><br /><br />
Check the console below for results:
Try setting your system or browser in offline/online mode and check the log or the window.navigator.onLine property for the value changes.
Note however this quote from Mozilla Documentation:
In Chrome and Safari, if the browser is not able to connect to a local area network (LAN) or a router, it is offline; all other conditions return true. So while you can assume that the browser is offline when it returns a false value, you cannot assume that a true value necessarily means that the browser can access the internet. You could be getting false positives, such as in cases where the computer is running a virtualization software that has virtual ethernet adapters that are always "connected." Therefore, if you really want to determine the online status of the browser, you should develop additional means for checking.
In Firefox and Internet Explorer, switching the browser to offline mode sends a false value. Until Firefox 41, all other conditions return a true value; since Firefox 41, on OS X and Windows, the value will follow the actual network connectivity.
(emphasis is my own)
This means that if window.navigator.onLine is false (or you get an offline event), you are guaranteed to have no Internet connection.
If it is true however (or you get an online event), it only means the system is connected to some network, at best. It does not mean that you have Internet access for example. To check that, you will still need to use one of the solutions described in the other answers.
I initially intended to post this as an update to Grant Wagner's answer, but it seemed too much of an edit, especially considering that the 2014 update was already not from him.
You can determine that the connection is lost by making failed XHR requests.
The standard approach is to retry the request a few times. If it doesn't go through, alert the user to check the connection, and fail gracefully.
Sidenote: To put the entire application in an "offline" state may lead to a lot of error-prone work of handling state.. wireless connections may come and go, etc. So your best bet may be to just fail gracefully, preserve the data, and alert the user.. allowing them to eventually fix the connection problem if there is one, and to continue using your app with a fair amount of forgiveness.
Sidenote: You could check a reliable site like google for connectivity, but this may not be entirely useful as just trying to make your own request, because while Google may be available, your own application may not be, and you're still going to have to handle your own connection problem. Trying to send a ping to google would be a good way to confirm that the internet connection itself is down, so if that information is useful to you, then it might be worth the trouble.
Sidenote: Sending a Ping could be achieved in the same way that you would make any kind of two-way ajax request, but sending a ping to google, in this case, would pose some challenges. First, we'd have the same cross-domain issues that are typically encountered in making Ajax communications. One option is to set up a server-side proxy, wherein we actually ping google (or whatever site), and return the results of the ping to the app. This is a catch-22 because if the internet connection is actually the problem, we won't be able to get to the server, and if the connection problem is only on our own domain, we won't be able to tell the difference. Other cross-domain techniques could be tried, for example, embedding an iframe in your page which points to google.com, and then polling the iframe for success/failure (examine the contents, etc). Embedding an image may not really tell us anything, because we need a useful response from the communication mechanism in order to draw a good conclusion about what's going on. So again, determining the state of the internet connection as a whole may be more trouble than it's worth. You'll have to weight these options out for your specific app.
IE 8 will support the window.navigator.onLine property.
But of course that doesn't help with other browsers or operating systems. I predict other browser vendors will decide to provide that property as well given the importance of knowing online/offline status in Ajax applications.
Until that happens, either XHR or an Image() or <img> request can provide something close to the functionality you want.
Update (2014/11/16)
Major browsers now support this property, but your results will vary.
Quote from Mozilla Documentation:
In Chrome and Safari, if the browser is not able to connect to a local area network (LAN) or a router, it is offline; all other conditions return true. So while you can assume that the browser is offline when it returns a false value, you cannot assume that a true value necessarily means that the browser can access the internet. You could be getting false positives, such as in cases where the computer is running a virtualization software that has virtual ethernet adapters that are always "connected." Therefore, if you really want to determine the online status of the browser, you should develop additional means for checking.
In Firefox and Internet Explorer, switching the browser to offline mode sends a false value. All other conditions return a true value.
if(navigator.onLine){
alert('online');
} else {
alert('offline');
}
There are a number of ways to do this:
AJAX request to your own website. If that request fails, there's a good chance it's the connection at fault. The JQuery documentation has a section on handling failed AJAX requests. Beware of the Same Origin Policy when doing this, which may stop you from accessing sites outside your domain.
You could put an onerror in an img, like <img src="http://www.example.com/singlepixel.gif" onerror="alert('Connection dead');" />.
This method could also fail if the source image is moved / renamed, and would generally be an inferior choice to the ajax option.
So there are several different ways to try and detect this, none perfect, but in the absence of the ability to jump out of the browser sandbox and access the user's net connection status directly, they seem to be the best options.
As olliej said, using the navigator.onLine browser property is preferable than sending network requests and, accordingly with developer.mozilla.org/En/Online_and_offline_events, it is even supported by old versions of Firefox and IE.
Recently, the WHATWG has specified the addition of the online and offline events, in case you need to react on navigator.onLine changes.
Please also pay attention to the link posted by Daniel Silveira which points out that relying on those signal/property for syncing with the server is not always a good idea.
You can use $.ajax()'s error callback, which fires if the request fails. If textStatus equals the string "timeout" it probably means connection is broken:
function (XMLHttpRequest, textStatus, errorThrown) {
// typically only one of textStatus or errorThrown
// will have info
this; // the options for this ajax request
}
From the doc:
Error: A function to be called if the request
fails. The function is passed three
arguments: The XMLHttpRequest object,
a string describing the type of error
that occurred and an optional
exception object, if one occurred.
Possible values for the second
argument (besides null) are "timeout",
"error", "notmodified" and
"parsererror". This is an Ajax Event
So for example:
$.ajax({
type: "GET",
url: "keepalive.php",
success: function(msg){
alert("Connection active!")
},
error: function(XMLHttpRequest, textStatus, errorThrown) {
if(textStatus == 'timeout') {
alert('Connection seems dead!');
}
}
});
window.navigator.onLine
is what you looking for, but few things here to add, first, if it's something on your app which you want to keep checking (like to see if the user suddenly go offline, which correct in this case most of the time, then you need to listen to change also), for that you add event listener to window to detect any change, for checking if the user goes offline, you can do:
window.addEventListener("offline",
()=> console.log("No Internet")
);
and for checking if online:
window.addEventListener("online",
()=> console.log("Connected Internet")
);
The HTML5 Application Cache API specifies navigator.onLine, which is currently available in the IE8 betas, WebKit (eg. Safari) nightlies, and is already supported in Firefox 3
I had to make a web app (ajax based) for a customer who works a lot with schools, these schools have often a bad internet connection I use this simple function to detect if there is a connection, works very well!
I use CodeIgniter and Jquery:
function checkOnline() {
setTimeout("doOnlineCheck()", 20000);
}
function doOnlineCheck() {
//if the server can be reached it returns 1, other wise it times out
var submitURL = $("#base_path").val() + "index.php/menu/online";
$.ajax({
url : submitURL,
type : "post",
dataType : "msg",
timeout : 5000,
success : function(msg) {
if(msg==1) {
$("#online").addClass("online");
$("#online").removeClass("offline");
} else {
$("#online").addClass("offline");
$("#online").removeClass("online");
}
checkOnline();
},
error : function() {
$("#online").addClass("offline");
$("#online").removeClass("online");
checkOnline();
}
});
}
an ajax call to your domain is the easiest way to detect if you are offline
$.ajax({
type: "HEAD",
url: document.location.pathname + "?param=" + new Date(),
error: function() { return false; },
success: function() { return true; }
});
this is just to give you the concept, it should be improved.
E.g. error=404 should still mean that you online
I know this question has already been answered but i will like to add my 10 cents explaining what's better and what's not.
Window.navigator.onLine
I noticed some answers spoke about this option but they never mentioned anything concerning the caveat.
This option involves the use of "window.navigator.onLine" which is a property under Browser Navigator Interface available on most modern browsers. It is really not a viable option for checking internet availability because firstly it is browser centric and secondly most browsers implement this property differently.
In Firefox: The property returns a boolean value, with true meaning online and false meaning offline but the caveat here is that
"the value is only updated when the user follows links or when a script requests a remote page." Hence if the user goes offline and
you query the property from a js function or script, the property will
always return true until the user follows a link.
In Chrome and Safari: If the browser is not able to connect to a local area network (LAN) or a router, it is offline; all other
conditions return true. So while you can assume that the browser is
offline when it returns a false value, you cannot assume that a true
value necessarily means that the browser can access the internet. You
could be getting false positives, such as in cases where the computer
is running a virtualization software that has virtual ethernet
adapters that are always "connected".
The statements above is simply trying to let you know that browsers alone cannot tell. So basically this option is unreliable.
Sending Request to Own Server Resource
This involves making HTTP request to your own server resource and if reachable assume internet availability else the user is offline. There are some few caveats to this option.
No server availability is 100% reliant, hence if for some reason your server is not reachable it would be falsely assumed that the user is offline whereas they're connected to the internet.
Multiple request to same resource can return cached response making the http response result unreliable.
If you agree your server is always online then you can go with this option.
Here is a simple snippet to fetch own resource:
// This fetches your website's favicon, so replace path with favicon url
// Notice the appended date param which helps prevent browser caching.
fetch('/favicon.ico?d='+Date.now())
.then(response => {
if (!response.ok)
throw new Error('Network response was not ok');
// At this point we can safely assume the user has connection to the internet
console.log("Internet connection available");
})
.catch(error => {
// The resource could not be reached
console.log("No Internet connection", error);
});
Sending Request to Third-Party Server Resource
We all know CORS is a thing.
This option involves making HTTP request to an external server resource and if reachable assume internet availability else the user is offline. The major caveat to this is the Cross-origin resource sharing which act as a limitation. Most reputable websites blocks CORS requests but for some you can have your way.
Below a simple snippet to fetch external resource, same as above but with external resource url:
// Firstly you trigger a resource available from a reputable site
// For demo purpose you can use the favicon from MSN website
// Also notice the appended date param which helps skip browser caching.
fetch('https://static-global-s-msn-com.akamaized.net/hp-neu/sc/2b/a5ea21.ico?d='+Date.now())
.then(response => {
// Check if the response is successful
if (!response.ok)
throw new Error('Network response was not ok');
// At this point we can safely say the user has connection to the internet
console.log("Internet available");
})
.catch(error => {
// The resource could not be reached
console.log("No Internet connection", error);
});
So, Finally for my personal project i went with the 2nd option which involves requesting own server resource because basically there are many factors to tell if there is "Internet Connection" on a user's device, not just from your website container alone nor from a limited browser api.
Remember your users can also be in an environment where some websites or resources are blocked, prohibited and not accessible which in turn affects the logic of connectivity check. The best bet will be:
Try to access a resource on your own server because this is your users environment (Typically i use website's favicon because the response is very light and it is not frequently updated).
If there is no connection to the resource, simply say "Error in connection" or "Connection lost" when you need to notify the user rather than assume a broad "No internet connection" which depends on many factors.
I think it is a very simple way.
var x = confirm("Are you sure you want to submit?");
if (x) {
if (navigator.onLine == true) {
return true;
}
alert('Internet connection is lost');
return false;
}
return false;
The problem of some methods like navigator.onLine is that they are not compatible with some browsers and mobile versions, an option that helped me a lot was to use the classic XMLHttpRequest method and also foresee the possible case that the file was stored in cache with response XMLHttpRequest.status is greater than 200 and less than 304.
Here is my code:
var xhr = new XMLHttpRequest();
//index.php is in my web
xhr.open('HEAD', 'index.php', true);
xhr.send();
xhr.addEventListener("readystatechange", processRequest, false);
function processRequest(e) {
if (xhr.readyState == 4) {
//If you use a cache storage manager (service worker), it is likely that the
//index.php file will be available even without internet, so do the following validation
if (xhr.status >= 200 && xhr.status < 304) {
console.log('On line!');
} else {
console.log('Offline :(');
}
}
}
I was looking for a client-side solution to detect if the internet was down or my server was down. The other solutions I found always seemed to be dependent on a 3rd party script file or image, which to me didn't seem like it would stand the test of time. An external hosted script or image could change in the future and cause the detection code to fail.
I've found a way to detect it by looking for an xhrStatus with a 404 code. In addition, I use JSONP to bypass the CORS restriction. A status code other than 404 shows the internet connection isn't working.
$.ajax({
url: 'https://www.bing.com/aJyfYidjSlA' + new Date().getTime() + '.html',
dataType: 'jsonp',
timeout: 5000,
error: function(xhr) {
if (xhr.status == 404) {
//internet connection working
}
else {
//internet is down (xhr.status == 0)
}
}
});
How about sending an opaque http request to google.com with no-cors?
fetch('https://google.com', {
method: 'GET', // *GET, POST, PUT, DELETE, etc.
mode: 'no-cors',
}).then((result) => {
console.log(result)
}).catch(e => {
console.error(e)
})
The reason for setting no-cors is that I was receiving cors errors even when disbaling the network connection on my pc. So I was getting cors blocked with or without an internet connection. Adding the no-cors makes the request opaque which apperantly seems to bypass cors and allows me to just simply check if I can connect to Google.
FYI: Im using fetch here for making the http request.
https://www.npmjs.com/package/fetch
My way.
<!-- the file named "tt.jpg" should exist in the same directory -->
<script>
function testConnection(callBack)
{
document.getElementsByTagName('body')[0].innerHTML +=
'<img id="testImage" style="display: none;" ' +
'src="tt.jpg?' + Math.random() + '" ' +
'onerror="testConnectionCallback(false);" ' +
'onload="testConnectionCallback(true);">';
testConnectionCallback = function(result){
callBack(result);
var element = document.getElementById('testImage');
element.parentNode.removeChild(element);
}
}
</script>
<!-- usage example -->
<script>
function myCallBack(result)
{
alert(result);
}
</script>
<a href=# onclick=testConnection(myCallBack);>Am I online?</a>
request head in request error
$.ajax({
url: /your_url,
type: "POST or GET",
data: your_data,
success: function(result){
//do stuff
},
error: function(xhr, status, error) {
//detect if user is online and avoid the use of async
$.ajax({
type: "HEAD",
url: document.location.pathname,
error: function() {
//user is offline, do stuff
console.log("you are offline");
}
});
}
});
Just use navigator.onLine if this is true then you're online else offline
You can try this will return true if network connected
function isInternetConnected(){return navigator.onLine;}
Here is a snippet of a helper utility I have. This is namespaced javascript:
network: function() {
var state = navigator.onLine ? "online" : "offline";
return state;
}
You should use this with method detection else fire off an 'alternative' way of doing this. The time is fast approaching when this will be all that is needed. The other methods are hacks.
There are 2 answers forthis for two different senarios:-
If you are using JavaScript on a website(i.e; or any front-end part)
The simplest way to do it is:
<h2>The Navigator Object</h2>
<p>The onLine property returns true if the browser is online:</p>
<p id="demo"></p>
<script>
document.getElementById("demo").innerHTML = "navigator.onLine is " + navigator.onLine;
</script>
But if you're using js on server side(i.e; node etc.), You can determine that the connection is lost by making failed XHR requests.
The standard approach is to retry the request a few times. If it doesn't go through, alert the user to check the connection, and fail gracefully.
How to detect the Internet connection is offline in JavaScript?
Almost all major browsers now support the window.navigator.onLine property, and the corresponding online and offline window events. Run the following code snippet to test it:
console.log('Initially ' + (window.navigator.onLine ? 'on' : 'off') + 'line');
window.addEventListener('online', () => console.log('Became online'));
window.addEventListener('offline', () => console.log('Became offline'));
document.getElementById('statusCheck').addEventListener('click', () => console.log('window.navigator.onLine is ' + window.navigator.onLine));
<button id="statusCheck">Click to check the <tt>window.navigator.onLine</tt> property</button><br /><br />
Check the console below for results:
Try setting your system or browser in offline/online mode and check the log or the window.navigator.onLine property for the value changes.
Note however this quote from Mozilla Documentation:
In Chrome and Safari, if the browser is not able to connect to a local area network (LAN) or a router, it is offline; all other conditions return true. So while you can assume that the browser is offline when it returns a false value, you cannot assume that a true value necessarily means that the browser can access the internet. You could be getting false positives, such as in cases where the computer is running a virtualization software that has virtual ethernet adapters that are always "connected." Therefore, if you really want to determine the online status of the browser, you should develop additional means for checking.
In Firefox and Internet Explorer, switching the browser to offline mode sends a false value. Until Firefox 41, all other conditions return a true value; since Firefox 41, on OS X and Windows, the value will follow the actual network connectivity.
(emphasis is my own)
This means that if window.navigator.onLine is false (or you get an offline event), you are guaranteed to have no Internet connection.
If it is true however (or you get an online event), it only means the system is connected to some network, at best. It does not mean that you have Internet access for example. To check that, you will still need to use one of the solutions described in the other answers.
I initially intended to post this as an update to Grant Wagner's answer, but it seemed too much of an edit, especially considering that the 2014 update was already not from him.
You can determine that the connection is lost by making failed XHR requests.
The standard approach is to retry the request a few times. If it doesn't go through, alert the user to check the connection, and fail gracefully.
Sidenote: To put the entire application in an "offline" state may lead to a lot of error-prone work of handling state.. wireless connections may come and go, etc. So your best bet may be to just fail gracefully, preserve the data, and alert the user.. allowing them to eventually fix the connection problem if there is one, and to continue using your app with a fair amount of forgiveness.
Sidenote: You could check a reliable site like google for connectivity, but this may not be entirely useful as just trying to make your own request, because while Google may be available, your own application may not be, and you're still going to have to handle your own connection problem. Trying to send a ping to google would be a good way to confirm that the internet connection itself is down, so if that information is useful to you, then it might be worth the trouble.
Sidenote: Sending a Ping could be achieved in the same way that you would make any kind of two-way ajax request, but sending a ping to google, in this case, would pose some challenges. First, we'd have the same cross-domain issues that are typically encountered in making Ajax communications. One option is to set up a server-side proxy, wherein we actually ping google (or whatever site), and return the results of the ping to the app. This is a catch-22 because if the internet connection is actually the problem, we won't be able to get to the server, and if the connection problem is only on our own domain, we won't be able to tell the difference. Other cross-domain techniques could be tried, for example, embedding an iframe in your page which points to google.com, and then polling the iframe for success/failure (examine the contents, etc). Embedding an image may not really tell us anything, because we need a useful response from the communication mechanism in order to draw a good conclusion about what's going on. So again, determining the state of the internet connection as a whole may be more trouble than it's worth. You'll have to weight these options out for your specific app.
IE 8 will support the window.navigator.onLine property.
But of course that doesn't help with other browsers or operating systems. I predict other browser vendors will decide to provide that property as well given the importance of knowing online/offline status in Ajax applications.
Until that happens, either XHR or an Image() or <img> request can provide something close to the functionality you want.
Update (2014/11/16)
Major browsers now support this property, but your results will vary.
Quote from Mozilla Documentation:
In Chrome and Safari, if the browser is not able to connect to a local area network (LAN) or a router, it is offline; all other conditions return true. So while you can assume that the browser is offline when it returns a false value, you cannot assume that a true value necessarily means that the browser can access the internet. You could be getting false positives, such as in cases where the computer is running a virtualization software that has virtual ethernet adapters that are always "connected." Therefore, if you really want to determine the online status of the browser, you should develop additional means for checking.
In Firefox and Internet Explorer, switching the browser to offline mode sends a false value. All other conditions return a true value.
if(navigator.onLine){
alert('online');
} else {
alert('offline');
}
There are a number of ways to do this:
AJAX request to your own website. If that request fails, there's a good chance it's the connection at fault. The JQuery documentation has a section on handling failed AJAX requests. Beware of the Same Origin Policy when doing this, which may stop you from accessing sites outside your domain.
You could put an onerror in an img, like <img src="http://www.example.com/singlepixel.gif" onerror="alert('Connection dead');" />.
This method could also fail if the source image is moved / renamed, and would generally be an inferior choice to the ajax option.
So there are several different ways to try and detect this, none perfect, but in the absence of the ability to jump out of the browser sandbox and access the user's net connection status directly, they seem to be the best options.
As olliej said, using the navigator.onLine browser property is preferable than sending network requests and, accordingly with developer.mozilla.org/En/Online_and_offline_events, it is even supported by old versions of Firefox and IE.
Recently, the WHATWG has specified the addition of the online and offline events, in case you need to react on navigator.onLine changes.
Please also pay attention to the link posted by Daniel Silveira which points out that relying on those signal/property for syncing with the server is not always a good idea.
You can use $.ajax()'s error callback, which fires if the request fails. If textStatus equals the string "timeout" it probably means connection is broken:
function (XMLHttpRequest, textStatus, errorThrown) {
// typically only one of textStatus or errorThrown
// will have info
this; // the options for this ajax request
}
From the doc:
Error: A function to be called if the request
fails. The function is passed three
arguments: The XMLHttpRequest object,
a string describing the type of error
that occurred and an optional
exception object, if one occurred.
Possible values for the second
argument (besides null) are "timeout",
"error", "notmodified" and
"parsererror". This is an Ajax Event
So for example:
$.ajax({
type: "GET",
url: "keepalive.php",
success: function(msg){
alert("Connection active!")
},
error: function(XMLHttpRequest, textStatus, errorThrown) {
if(textStatus == 'timeout') {
alert('Connection seems dead!');
}
}
});
window.navigator.onLine
is what you looking for, but few things here to add, first, if it's something on your app which you want to keep checking (like to see if the user suddenly go offline, which correct in this case most of the time, then you need to listen to change also), for that you add event listener to window to detect any change, for checking if the user goes offline, you can do:
window.addEventListener("offline",
()=> console.log("No Internet")
);
and for checking if online:
window.addEventListener("online",
()=> console.log("Connected Internet")
);
The HTML5 Application Cache API specifies navigator.onLine, which is currently available in the IE8 betas, WebKit (eg. Safari) nightlies, and is already supported in Firefox 3
I had to make a web app (ajax based) for a customer who works a lot with schools, these schools have often a bad internet connection I use this simple function to detect if there is a connection, works very well!
I use CodeIgniter and Jquery:
function checkOnline() {
setTimeout("doOnlineCheck()", 20000);
}
function doOnlineCheck() {
//if the server can be reached it returns 1, other wise it times out
var submitURL = $("#base_path").val() + "index.php/menu/online";
$.ajax({
url : submitURL,
type : "post",
dataType : "msg",
timeout : 5000,
success : function(msg) {
if(msg==1) {
$("#online").addClass("online");
$("#online").removeClass("offline");
} else {
$("#online").addClass("offline");
$("#online").removeClass("online");
}
checkOnline();
},
error : function() {
$("#online").addClass("offline");
$("#online").removeClass("online");
checkOnline();
}
});
}
an ajax call to your domain is the easiest way to detect if you are offline
$.ajax({
type: "HEAD",
url: document.location.pathname + "?param=" + new Date(),
error: function() { return false; },
success: function() { return true; }
});
this is just to give you the concept, it should be improved.
E.g. error=404 should still mean that you online
I know this question has already been answered but i will like to add my 10 cents explaining what's better and what's not.
Window.navigator.onLine
I noticed some answers spoke about this option but they never mentioned anything concerning the caveat.
This option involves the use of "window.navigator.onLine" which is a property under Browser Navigator Interface available on most modern browsers. It is really not a viable option for checking internet availability because firstly it is browser centric and secondly most browsers implement this property differently.
In Firefox: The property returns a boolean value, with true meaning online and false meaning offline but the caveat here is that
"the value is only updated when the user follows links or when a script requests a remote page." Hence if the user goes offline and
you query the property from a js function or script, the property will
always return true until the user follows a link.
In Chrome and Safari: If the browser is not able to connect to a local area network (LAN) or a router, it is offline; all other
conditions return true. So while you can assume that the browser is
offline when it returns a false value, you cannot assume that a true
value necessarily means that the browser can access the internet. You
could be getting false positives, such as in cases where the computer
is running a virtualization software that has virtual ethernet
adapters that are always "connected".
The statements above is simply trying to let you know that browsers alone cannot tell. So basically this option is unreliable.
Sending Request to Own Server Resource
This involves making HTTP request to your own server resource and if reachable assume internet availability else the user is offline. There are some few caveats to this option.
No server availability is 100% reliant, hence if for some reason your server is not reachable it would be falsely assumed that the user is offline whereas they're connected to the internet.
Multiple request to same resource can return cached response making the http response result unreliable.
If you agree your server is always online then you can go with this option.
Here is a simple snippet to fetch own resource:
// This fetches your website's favicon, so replace path with favicon url
// Notice the appended date param which helps prevent browser caching.
fetch('/favicon.ico?d='+Date.now())
.then(response => {
if (!response.ok)
throw new Error('Network response was not ok');
// At this point we can safely assume the user has connection to the internet
console.log("Internet connection available");
})
.catch(error => {
// The resource could not be reached
console.log("No Internet connection", error);
});
Sending Request to Third-Party Server Resource
We all know CORS is a thing.
This option involves making HTTP request to an external server resource and if reachable assume internet availability else the user is offline. The major caveat to this is the Cross-origin resource sharing which act as a limitation. Most reputable websites blocks CORS requests but for some you can have your way.
Below a simple snippet to fetch external resource, same as above but with external resource url:
// Firstly you trigger a resource available from a reputable site
// For demo purpose you can use the favicon from MSN website
// Also notice the appended date param which helps skip browser caching.
fetch('https://static-global-s-msn-com.akamaized.net/hp-neu/sc/2b/a5ea21.ico?d='+Date.now())
.then(response => {
// Check if the response is successful
if (!response.ok)
throw new Error('Network response was not ok');
// At this point we can safely say the user has connection to the internet
console.log("Internet available");
})
.catch(error => {
// The resource could not be reached
console.log("No Internet connection", error);
});
So, Finally for my personal project i went with the 2nd option which involves requesting own server resource because basically there are many factors to tell if there is "Internet Connection" on a user's device, not just from your website container alone nor from a limited browser api.
Remember your users can also be in an environment where some websites or resources are blocked, prohibited and not accessible which in turn affects the logic of connectivity check. The best bet will be:
Try to access a resource on your own server because this is your users environment (Typically i use website's favicon because the response is very light and it is not frequently updated).
If there is no connection to the resource, simply say "Error in connection" or "Connection lost" when you need to notify the user rather than assume a broad "No internet connection" which depends on many factors.
I think it is a very simple way.
var x = confirm("Are you sure you want to submit?");
if (x) {
if (navigator.onLine == true) {
return true;
}
alert('Internet connection is lost');
return false;
}
return false;
The problem of some methods like navigator.onLine is that they are not compatible with some browsers and mobile versions, an option that helped me a lot was to use the classic XMLHttpRequest method and also foresee the possible case that the file was stored in cache with response XMLHttpRequest.status is greater than 200 and less than 304.
Here is my code:
var xhr = new XMLHttpRequest();
//index.php is in my web
xhr.open('HEAD', 'index.php', true);
xhr.send();
xhr.addEventListener("readystatechange", processRequest, false);
function processRequest(e) {
if (xhr.readyState == 4) {
//If you use a cache storage manager (service worker), it is likely that the
//index.php file will be available even without internet, so do the following validation
if (xhr.status >= 200 && xhr.status < 304) {
console.log('On line!');
} else {
console.log('Offline :(');
}
}
}
I was looking for a client-side solution to detect if the internet was down or my server was down. The other solutions I found always seemed to be dependent on a 3rd party script file or image, which to me didn't seem like it would stand the test of time. An external hosted script or image could change in the future and cause the detection code to fail.
I've found a way to detect it by looking for an xhrStatus with a 404 code. In addition, I use JSONP to bypass the CORS restriction. A status code other than 404 shows the internet connection isn't working.
$.ajax({
url: 'https://www.bing.com/aJyfYidjSlA' + new Date().getTime() + '.html',
dataType: 'jsonp',
timeout: 5000,
error: function(xhr) {
if (xhr.status == 404) {
//internet connection working
}
else {
//internet is down (xhr.status == 0)
}
}
});
How about sending an opaque http request to google.com with no-cors?
fetch('https://google.com', {
method: 'GET', // *GET, POST, PUT, DELETE, etc.
mode: 'no-cors',
}).then((result) => {
console.log(result)
}).catch(e => {
console.error(e)
})
The reason for setting no-cors is that I was receiving cors errors even when disbaling the network connection on my pc. So I was getting cors blocked with or without an internet connection. Adding the no-cors makes the request opaque which apperantly seems to bypass cors and allows me to just simply check if I can connect to Google.
FYI: Im using fetch here for making the http request.
https://www.npmjs.com/package/fetch
My way.
<!-- the file named "tt.jpg" should exist in the same directory -->
<script>
function testConnection(callBack)
{
document.getElementsByTagName('body')[0].innerHTML +=
'<img id="testImage" style="display: none;" ' +
'src="tt.jpg?' + Math.random() + '" ' +
'onerror="testConnectionCallback(false);" ' +
'onload="testConnectionCallback(true);">';
testConnectionCallback = function(result){
callBack(result);
var element = document.getElementById('testImage');
element.parentNode.removeChild(element);
}
}
</script>
<!-- usage example -->
<script>
function myCallBack(result)
{
alert(result);
}
</script>
<a href=# onclick=testConnection(myCallBack);>Am I online?</a>
Just use navigator.onLine if this is true then you're online else offline
request head in request error
$.ajax({
url: /your_url,
type: "POST or GET",
data: your_data,
success: function(result){
//do stuff
},
error: function(xhr, status, error) {
//detect if user is online and avoid the use of async
$.ajax({
type: "HEAD",
url: document.location.pathname,
error: function() {
//user is offline, do stuff
console.log("you are offline");
}
});
}
});
You can try this will return true if network connected
function isInternetConnected(){return navigator.onLine;}
Here is a snippet of a helper utility I have. This is namespaced javascript:
network: function() {
var state = navigator.onLine ? "online" : "offline";
return state;
}
You should use this with method detection else fire off an 'alternative' way of doing this. The time is fast approaching when this will be all that is needed. The other methods are hacks.
There are 2 answers forthis for two different senarios:-
If you are using JavaScript on a website(i.e; or any front-end part)
The simplest way to do it is:
<h2>The Navigator Object</h2>
<p>The onLine property returns true if the browser is online:</p>
<p id="demo"></p>
<script>
document.getElementById("demo").innerHTML = "navigator.onLine is " + navigator.onLine;
</script>
But if you're using js on server side(i.e; node etc.), You can determine that the connection is lost by making failed XHR requests.
The standard approach is to retry the request a few times. If it doesn't go through, alert the user to check the connection, and fail gracefully.
I'm trying to detect when an Ajax (xhr) request gets a status code of 408 in order to direct the user to a login/timeout page.
At the moment I'm using an old version of jQuery (1.3.2) to perform all of my ajax requests and have the following bit of code to detect 408 error responses:
$().ready(function() {
$.ajaxSetup({
error:function(x,e) {
if (x.status==408) {
document.location.href = '/timeout.html';
} else {
document.location.href = '/error.html';
}
}
});
});
This code is not working as intended in Firefox and the xhr object has a status code of 0 and empty status text even though the status code is indeed 408. As a result the general error page is loaded instead of the timeout page.
EDIT: I tried console.dir(x) and got this output (as you can see status is 0 and status text is ""):
The ajax request is not cross domain and is being made from the same domain.
I also noticed that all response headers are cleared for any XHR that has an error status in Firefox.
None of these issues are evident in Chrome.
I even tried a simple XMLHttpRequest to a URL that will return a 408 status (all on the same domain/origin) and all headers were null - example shown below:
var x = new XMLHttpRequest();
x.open("GET", "http://example.com/url-that-will-return-408-status");
x.onreadystatechange = function() {
if(this.readyState == 2) {
console.log('CustomErrorCode=' + this.getResponseHeader('CustomErrorCode'));
console.log('Content-Length=' + this.getResponseHeader('Content-Length'));
console.log('Content-Type=' + this.getResponseHeader('Content-Type'));
console.log(this.getAllResponseHeaders());
}
}
x.send();
Any ideas as to why Firefox is different to Chrome in this regard and how I can work around this issue? Based on my reading of the W3C spec it seems that maybe Firefox is doing the right thing but I don't quite understand why response headers would be cleared for an error status.
Check this out.
It looks like Firefox re-requests 10 times as long as a 408 status code is provided.
A ticket has been opened about this Firefox "issue", and this behaviour is actually not compliant with the RFC. Since the ticked is officially marked as RESOLVED FIXED (as many other 408-related issues, here and here), I would suggest you to check your version and eventually re-open it, providing further information about your environment.
I'm completely new to the javascript and ajax world but trying to learn.
Right now I'm testing the XMLHttpRequest and I can't make work even the simplest example. This is the code I'm trying to run
<script type="text/javascript">
function test() {
xhr = new XMLHttpRequest();
xhr.onreadystatechange = function() {
if (xhr.readyState == 4 && xhr.status == 200){
var container = document.getElementById('line');
container.innerHTML = xhr.responseText;
} else {
alert(xhr.status);
}
}
xhr.open('GET', 'http://www.google.com', true);
xhr.send(null);
}
</script>
And I always get the alert with the status 0. I've read tons of webs about this and I don't know what am I missing. I will appreciate any help, thanks!
You are running into the Same Origin Policy.
Unless your code is actually running on www.google.com (which is unlikely), this is going to error.
Also, and while this isn't causing you a problem at the moment, it is poor practice and can lead to race conditions, you are using globals all over the place.
Make the xhr variable local to the function
var xhr = new XMLHttpRequest();
And refer to it with this inside the onreadstatechange method.
if (this.readyState == 4 && this.status == 200){
// etc etc
Following from David's answer:
You have to use a relative path to stay within the same origin policy. Otherwise most browsers will simply return an empty responseText and status == 0.
As one possible workaround, you could set up a very simple reverse proxy (with mod_proxy if you are using Apache). This would allow you to use relative paths in your AJAX request, while the HTTP server would be acting as a proxy to any "remote" location.
The fundamental configuration directive to set up a reverse proxy in mod_proxy is the ProxyPass. You would typically use it as follows:
ProxyPass /ajax/ http://google.com/
In this case, the browser would be requesting /ajax/search?q=stack+overflow but the server would serve this by acting as a proxy to http://google.com/search?q=stack+overflow.
In addition to the same origin policy issue, your alert is in an illogical place. When you use XMLHttpRequest, the function assigned to xhr.onreadystatechange will be called whenever readyState changes. readyState should change (in theory) from 0 (initialized) to 1 (sent) to 2 (loading) to 3 (interactive) to 4 (finished).
What your code does is check the readyState and see if the request is finished (if (xhr.readyState == 4)), and if not, alert the HTTP status code. Since the request hasn't been sent yet (or has just been sent), there shouldn't be an HTTP status yet.
Ideally, you should move the alert inside the if block, so it lets you know when it finishes.
Is it possible to prevent the browser from following redirects when sending XMLHttpRequest-s (i.e. to get the redirect status code back and handle it myself)?
Not according to the W3C standard for the XMLHttpRequest object (emphasis added):
If the response is an HTTP redirect:
If the origin of the URL conveyed by the Location header is same origin
with the XMLHttpRequest origin and the
redirect does not violate infinite
loop precautions, transparently
follow the redirect while observing
the same-origin request event rules.
They were considering it for a future release:
This specification does not include
the following features which are being
considered for a future version of
this specification:
Property to disable following redirects;
but the latest specification no longer mentions this.
The new Fetch API supports different modes of redirect handling: follow, error, and manual, but I can't find a way to view the new URL or the status code when the redirection has been canceled. You just can stop the redirection itself, and then it looks like an error (empty response). If that's all you need, you are good to go. Also you should be aware that the requests made via this API are not cancelable yet. They are now.
As for XMLHttpRequest, you can HEAD the server and inspect whether the URL has changed:
var http = new XMLHttpRequest();
http.open('HEAD', '/the/url');
http.onreadystatechange = function() {
if (this.readyState === this.DONE) {
console.log(this.responseURL);
}
};
http.send();
You won't get the status code, but will find the new URL without downloading the whole page from it.
No you there isn't any place in the API exposed by XMLHttpRequest that allows you to override its default behaviour of following a 301 or 302 automatically.
If the client is running IE on windows then you can use WinHTTP instead to set an option to prevent that behaviour but thats a very limiting solution.
You can use responseURL property to get the redirect destination or check whether the response was ultimately fetched from a location you accept.
This of course means the result is fetched anyway, but at least you can get the necessary info about the redirect destination and for example detect conditions when you would like to discard the response.
I extended user's answer to include an abort() call. It seems like this prevents the server from sending too much data when all you want is the redirect url.
var url = 'the url'
var http = new XMLHttpRequest();
http.open('GET', url);
http.onreadystatechange = function() {
if (this.readyState === this.DONE) {
console.log(this.responseURL)
this.abort() // This seems to stop the response
}
}
http.send()
In real life I wrapped the above code in a promise, but it made the code hard to read.
Also, I don't understand why getting the redirect url needs to be this difficult, but that is a question for another time and place.
It is not possible to handle redirect or 302 status at client side as answered in other comments. However you can prevent redirection. To do that you can set request header "X-Requested-With" with "XMLHttpRequest"
xhttp.setRequestHeader("X-Requested-With", "XMLHttpRequest");
This should be done after open but before send. Example below
let xhttp = new XMLHttpRequest();
xhttp.onreadystatechange = function () {
if (this.readyState == 4 && this.status == 200) {
reqObj.success(JSON.parse(this.responseText))
} else if (this.status != 200) {
reqObj.error(this.statusText)
}
};
xhttp.open(reqObj.type, reqObj.url, reqObj.async);
xhttp.setRequestHeader("X-Requested-With", "XMLHttpRequest");
xhttp.send();