I have some third party library whose events I'm listening. I get a chance to modify data which that library is going to append in the UI. It is all fine until that data modification is synchronous. As soon as I involve Ajax callbacks/promises, this fails to work. Let me put an example to show case the problem.
Below is how I'm listening to a event:-
d.on('gotResults', function (data) {
// If alter data directly it works fine.
data.title = 'newTitle';
// Above code alters the text correctly.
//I want some properties to be grabbed from elsewhere so I make an Ajax call.
$.ajax('http://someurl...', {data.id}, function (res) {
data.someProperty = res.thatProperty;
});
// Above code doesn't wait for ajax call to complete, it just go away and
renders page without data change.
// Yes I tried promises but doesn't help
return fetch('http://someurl...').then(function (data) {
data.someProperty = res.thatProperty;
return true;
});
// Above code also triggers the url and gets away. Doesn't wait for then to complete.
});
I cannot change/alter the third party library. All I have is to listen to event and alter that data.
Any better solutions. Nope. I can't use async/wait, generators, because I want to have it supported for ES5 browsers.
You cannot make a synchronous function wait for an asynchronous response, it's simply not possible by definition. Your options pretty much are:
BAD IDEA: Make a synchronous AJAX request. Again: BAD IDEA. Not only will this block the entire browser, it is also a deprecated practice and should not be used in new code, or indeed ever.
Fetch the asynchronous data first and store it locally, so it's available synchronously when needed. That obviously only works if you have an idea what data you'll be needing ahead of time.
Alter the 3rd party library to add support for asynchronous callbacks, or request that of the vendor.
Find some hackaround where you'll probably let the library work with incomplete data first and then update it when the asynchronous data is available. That obviously depends a lot on the specifics of that library and the task being done.
Does the gotResults callback function really need to return anything else than true? If not, then you could just write regular asynchronous code without this library knowing about it. Let me explain myself by rewriting your pseudocode:
d.on('gotResults', function (data) {
// If alter data directly it works fine.
data.title = 'newTitle';
// Above code alters the text correctly.
//I want some properties to be grabbed from elsewhere so I make an Ajax call.
$.ajax('http://someurl...', {data.id}, function (res) {
data.someProperty = res.thatProperty;
// Above code doesn't wait for ajax call to complete, it just go away and
// EDIT: now it should render properly
renders page without data change.
// Yes I tried promises but doesn't help
return fetch('http://someurl...');
// Above code also triggers the url and gets away. Doesn't wait for then to complete.
}).then(function (data) {
data.someProperty = res.thatProperty;
// maybe render again here?
}).catch(function(err) {
handleError(err); // handle errors so the don't disappear silently
});
return true; // this line runs before any of the above asynchronous code but do we care?
});
For the past two days I have been working with chrome asynchronous storage. It works "fine" if you have a function. (Like Below):
chrome.storage.sync.get({"disableautoplay": true}, function(e){
console.log(e.disableautoplay);
});
My problem is that I can't use a function with what I'm doing. I want to just return it, like LocalStorage can. Something like:
var a = chrome.storage.sync.get({"disableautoplay": true});
or
var a = chrome.storage.sync.get({"disableautoplay": true}, function(e){
return e.disableautoplay;
});
I've tried a million combinations, even setting a public variable and setting that:
var a;
window.onload = function(){
chrome.storage.sync.get({"disableautoplay": true}, function(e){
a = e.disableautoplay;
});
}
Nothing works. It all returns undefined unless the code referencing it is inside the function of the get, and that's useless to me. I just want to be able to return a value as a variable.
Is this even possible?
EDIT: This question is not a duplicate, please allow me to explain why:
1: There are no other posts asking this specifically (I spent two days looking first, just in case).
2: My question is still not answered. Yes, Chrome Storage is asynchronous, and yes, it does not return a value. That's the problem. I'll elaborate below...
I need to be able to get a stored value outside of the chrome.storage.sync.get function. I -cannot- use localStorage, as it is url specific, and the same values cannot be accessed from both the browser_action page of the chrome extension, and the background.js. I cannot store a value with one script and access it with another. They're treated separately.
So my only solution is to use Chrome Storage. There must be some way to get the value of a stored item and reference it outside the get function. I need to check it in an if statement.
Just like how localStorage can do
if(localStorage.getItem("disableautoplay") == true);
There has to be some way to do something along the lines of
if(chrome.storage.sync.get("disableautoplay") == true);
I realize it's not going to be THAT simple, but that's the best way I can explain it.
Every post I see says to do it this way:
chrome.storage.sync.get({"disableautoplay": true, function(i){
console.log(i.disableautoplay);
//But the info is worthless to me inside this function.
});
//I need it outside this function.
Here's a tailored answer to your question. It will still be 90% long explanation why you can't get around async, but bear with me — it will help you in general. I promise there is something pertinent to chrome.storage in the end.
Before we even begin, I will reiterate canonical links for this:
After calling chrome.tabs.query, the results are not available
(Chrome specific, excellent answer by RobW, probably easiest to understand)
Why is my variable unaltered after I modify it inside of a function? - Asynchronous code reference (General canonical reference on what you're asking for)
How do I return the response from an asynchronous call?
(an older but no less respected canonical question on asynchronous JS)
You Don't Know JS: Async & Performance (ebook on JS asynchronicity)
So, let's discuss JS asynchonicity.
Section 1: What is it?
First concept to cover is runtime environment. JavaScript is, in a way, embedded in another program that controls its execution flow - in this case, Chrome. All events that happen (timers, clicks, etc.) come from the runtime environment. JavaScript code registers handlers for events, which are remembered by the runtime and are called as appropriate.
Second, it's important to understand that JavaScript is single-threaded. There is a single event loop maintained by the runtime environment; if there is some other code executing when an event happens, that event is put into a queue to be processed when the current code terminates.
Take a look at this code:
var clicks = 0;
someCode();
element.addEventListener("click", function(e) {
console.log("Oh hey, I'm clicked!");
clicks += 1;
});
someMoreCode();
So, what is happening here? As this code executes, when the execution reaches .addEventListener, the following happens: the runtime environment is notified that when the event happens (element is clicked), it should call the handler function.
It's important to understand (though in this particular case it's fairly obvious) that the function is not run at this point. It will only run later, when that event happens. The execution continues as soon as the runtime acknowledges 'I will run (or "call back", hence the name "callback") this when that happens.' If someMoreCode() tries to access clicks, it will be 0, not 1.
This is what called asynchronicity, as this is something that will happen outside the current execution flow.
Section 2: Why is it needed, or why synchronous APIs are dying out?
Now, an important consideration. Suppose that someMoreCode() is actually a very long-running piece of code. What will happen if a click event happened while it's still running?
JavaScript has no concept of interrupts. Runtime will see that there is code executing, and will put the event handler call into the queue. The handler will not execute before someMoreCode() finishes completely.
While a click event handler is extreme in the sense that the click is not guaranteed to occur, this explains why you cannot wait for the result of an asynchronous operation. Here's an example that won't work:
element.addEventListener("click", function(e) {
console.log("Oh hey, I'm clicked!");
clicks += 1;
});
while(1) {
if(clicks > 0) {
console.log("Oh, hey, we clicked indeed!");
break;
}
}
You can click to your heart's content, but the code that would increment clicks is patiently waiting for the (non-terminating) loop to terminate. Oops.
Note that this piece of code doesn't only freeze this piece of code: every single event is no longer handled while we wait, because there is only one event queue / thread. There is only one way in JavaScript to let other handlers do their job: terminate current code, and let the runtime know what to call when something we want occurs.
This is why asynchronous treatment is applied to another class of calls that:
require the runtime, and not JS, to do something (disk/network access for example)
are guaranteed to terminate (whether in success or failure)
Let's go with a classic example: AJAX calls. Suppose we want to load a file from a URL.
Let's say that on our current connection, the runtime can request, download, and process the file in the form that can be used in JS in 100ms.
On another connection, that's kinda worse, it would take 500ms.
And sometimes the connection is really bad, so runtime will wait for 1000ms and give up with a timeout.
If we were to wait until this completes, we would have a variable, unpredictable, and relatively long delay. Because of how JS waiting works, all other handlers (e.g. UI) would not do their job for this delay, leading to a frozen page.
Sounds familiar? Yes, that's exactly how synchronous XMLHttpRequest works. Instead of a while(1) loop in JS code, it essentially happens in the runtime code - since JavaScript cannot let other code execute while it's waiting.
Yes, this allows for a familiar form of code:
var file = get("http://example.com/cat_video.mp4");
But at a terrible, terrible cost of everything freezing. A cost so terrible that, in fact, the modern browsers consider this deprecated. Here's a discussion on the topic on MDN.
Now let's look at localStorage. It matches the description of "terminating call to the runtime", and yet it is synchronous. Why?
To put it simply: historical reasons (it's a very old specification).
While it's certainly more predictable than a network request, localStorage still needs the following chain:
JS code <-> Runtime <-> Storage DB <-> Cache <-> File storage on disk
It's a complex chain of events, and the whole JS engine needs to be paused for it. This leads to what is considered unacceptable performance.
Now, Chrome APIs are, from ground up, designed for performance. You can still see some synchronous calls in older APIs like chrome.extension, and there are calls that are handled in JS (and therefore make sense as synchronous) but chrome.storage is (relatively) new.
As such, it embraces the paradigm "I acknowledge your call and will be back with results, now do something useful meanwhile" if there's a delay involved with doing something with runtime. There are no synchronous versions of those calls, unlike XMLHttpRequest.
Quoting the docs:
It's [chrome.storage] asynchronous with bulk read and write operations, and therefore faster than the blocking and serial localStorage API.
Section 3: How to embrace asynchronicity?
The classic way to deal with asynchronicity are callback chains.
Suppose you have the following synchronous code:
var result = doSomething();
doSomethingElse(result);
Suppose that, now, doSomething is asynchronous. Then this becomes:
doSomething(function(result) {
doSomethingElse(result);
});
But what if it's even more complex? Say it was:
function doABunchOfThings() {
var intermediate = doSomething();
return doSomethingElse(intermediate);
}
if (doABunchOfThings() == 42) {
andNowForSomethingCompletelyDifferent()
}
Well.. In this case you need to move all this in the callback. return must become a call instead.
function doABunchOfThings(callback) {
doSomething(function(intermediate) {
callback(doSomethingElse(intermediate));
});
}
doABunchOfThings(function(result) {
if (result == 42) {
andNowForSomethingCompletelyDifferent();
}
});
Here you have a chain of callbacks: doABunchOfThings calls doSomething immediately, which terminates, but sometime later calls doSomethingElse, the result of which is fed to if through another callback.
Obviously, the layering of this can get messy. Well, nobody said that JavaScript is a good language.. Welcome to Callback Hell.
There are tools to make it more manageable, for example Promises and async/await. I will not discuss them here (running out of space), but they do not change the fundamental "this code will only run later" part.
Section TL;DR: I absolutely must have the storage synchronous, halp!
Sometimes there are legitimate reasons to have a synchronous storage. For instance, webRequest API blocking calls can't wait. Or Callback Hell is going to cost you dearly.
What you can do is have a synchronous cache of the asynchronous chrome.storage. It comes with some costs, but it's not impossible.
Consider:
var storageCache = {};
chrome.storage.sync.get(null, function(data) {
storageCache = data;
// Now you have a synchronous snapshot!
});
// Not HERE, though, not until "inner" code runs
If you can put ALL your initialization code in one function init(), then you have this:
var storageCache = {};
chrome.storage.sync.get(null, function(data) {
storageCache = data;
init(); // All your code is contained here, or executes later that this
});
By the time code in init() executes, and afterwards when any event that was assigned handlers in init() happens, storageCache will be populated. You have reduced the asynchronicity to ONE callback.
Of course, this is only a snapshot of what storage looks at the time of executing get(). If you want to maintain coherency with storage, you need to set up updates to storageCache via chrome.storage.onChanged events. Because of the single-event-loop nature of JS, this means the cache will only be updated while your code doesn't run, but in many cases that's acceptable.
Similarly, if you want to propagate changes to storageCache to the real storage, just setting storageCache['key'] is not enough. You would need to write a set(key, value) shim that BOTH writes to storageCache and schedules an (asynchronous) chrome.storage.sync.set.
Implementing those is left as an exercise.
Make the main function "async" and make a "Promise" in it :)
async function mainFuction() {
var p = new Promise(function(resolve, reject){
chrome.storage.sync.get({"disableautoplay": true}, function(options){
resolve(options.disableautoplay);
})
});
const configOut = await p;
console.log(configOut);
}
Yes, you can achieve that using promise:
let getFromStorage = keys => new Promise((resolve, reject) =>
chrome.storage.sync.get(...keys, result => resolve(result)));
chrome.storage.sync.get has no returned values, which explains why you would get undefined when calling something like
var a = chrome.storage.sync.get({"disableautoplay": true});
chrome.storage.sync.get is also an asynchronous method, which explains why in the following code a would be undefined unless you access it inside the callback function.
var a;
window.onload = function(){
chrome.storage.sync.get({"disableautoplay": true}, function(e){
// #2
a = e.disableautoplay; // true or false
});
// #1
a; // undefined
}
If you could manage to work this out you will have made a source of strange bugs. Messages are executed asynchronously which means that when you send a message the rest of your code can execute before the asychronous function returns. There is not guarantee for that since chrome is multi-threaded and the get function may delay, i.e. hdd is busy.
Using your code as an example:
var a;
window.onload = function(){
chrome.storage.sync.get({"disableautoplay": true}, function(e){
a = e.disableautoplay;
});
}
if(a)
console.log("true!");
else
console.log("false! Maybe undefined as well. Strange if you know that a is true, right?");
So it will be better if you use something like this:
chrome.storage.sync.get({"disableautoplay": true}, function(e){
a = e.disableautoplay;
if(a)
console.log("true!");
else
console.log("false! But maybe undefined as well");
});
If you really want to return this value then use the javascript storage API. This stores only string values so you have to cast the value before storing and after getting it.
//Setting the value
localStorage.setItem('disableautoplay', JSON.stringify(true));
//Getting the value
var a = JSON.stringify(localStorage.getItem('disableautoplay'));
var a = await chrome.storage.sync.get({"disableautoplay": true});
This should be in an async function. e.g. if you need to run it at top level, wrap it:
(async () => {
var a = await chrome.storage.sync.get({"disableautoplay": true});
})();
I'm just curious if it is possible in Firefox addon to call a function that would wait to callback in asynchronous function call. It could be potentially useful.
For example
function async_func(callback) {
...
callback(2);
}
function callback_foo(x) { return x*x; }
var results = Sync.wait_for_async_callback(async_func, callback_foo);
// now, results is 2*2 = 4
....
I know that javascript engine is generally one-thread so it's not allowed to run simultaneously synchronous waiting, sleeping in Sync.wait_for_async_callback and calling callback in async_func or functions called from async_func.
But I've found by chance this article that may point that it would be possible. However I can't find needed module for this (a Sync.js file). Link on that article doesn't seems to be useful (errors in server-side code?) Firefox code on Mozilla-central doesn't know this file.
Maybe Web Workers or nsIThreadManager could be other way to convert async to sync call.
So I found the Sync.js module. It uses synchrounous waiting for next events by processNextEvent until callback will be fired:
let thread = Cc["#mozilla.org/thread-manager;1"].getService().currentThread;
while (async callback not fired yet)
thread.processNextEvent(true);
This trick seems to work but according to Marco Bonardo it is bad choice (crashes?)
This is done with Promises, read {this documentation](https://developer.mozilla.org/en-US/docs/Mozilla/JavaScript_code_modules/Promise.jsm) which is based on this specification.
I'm writing a browser extension for chrome that uses Web SQL for local storage. The code for both of these components seems to heavily rely on async operations. I have a good understanding of asynchronous operations but not a whole lot of experience writing code that relies this heavily on them.
For Example:
var CSUID = "";
//this is an async callback for handling browser tab updates
function checkForValidUrl(tabId, changeInfo, tab) {
getCookies("http://www.cleansnipe.com/", "CSUID", handleCookie);
if(CSUID != ""){ //this could be in handleCookie if i could access the tab
//do stuff with the tab
}
}
function handleCookie(cookie) {
if (cookie != "" && cookie != null) {
CSUID = cookie;
}
}
In order to overcome the lack of ability to pass/return variables into/from these handlers I find myself creating global variables and setting them in the handlers. Of course this doesn't work as expected because the variable is often accessed before the callback has executed.
What is the best practice for handling this situation? I thought to use global flags/counters with a while loop to pause execute but this seems messy prone to application hang.
If jQuery is an option, it has a beautiful system of what it calls deferred objects. It allows for graceful and effective management of asynchronous situations - or indeed synchronous, as the cases may be or vary.
(Deferreds aren't limited to just jQuery, but jQuery has a nice API for them).
Here's a simple example purely to demonstrate the concept.
//get data func
function get_data(immediate) {
//if immediate, return something synchonously
if (immediate)
return 'some static data';
//else get the data from something over AJAX
else
return $.get('some_url');
}
//two requests two get data - one asynchronous, one synchronous
var data1 = get_data(true), data2 = get_data();
//do something when both resolved
$.when(data1, data2).done(function(data1, data2) {
//callback code here...
});
Deferreds don't have to involve AJAX; you can create your own deferred objects (jQuery's AJAX requests automatically make and return them) and resolve/reject them manually. I did a blog post on this a few months back - it might help.
This might be the opposite of my previous question here but anyway, I need to know its answer as well.
I have an Ajax call in my algorithm that I need to wait for it to run some code. There are two solutions:
1) The typical solution:
ajaxCall(function(result){
//the code to run after the call is returned
});
2) The one I'm wondering if it can be an alternative:
res=null;
ajaxCall(function(result){
res=result;
});
while(res==null)/*wait! but this will lock the GUI I guess*/;
//do the rest of the code because now res is initialized
The question is how can I write the second solution in an efficient way that doesn't freeze the GUI?
Just make the ajax call synchronous.
ref: http://developer.mozilla.org/en/XMLHttpRequest
look for the async parameter
I suggest hooking all dependent code to execute as a callback from your ajax call 's return. That way, all other javascript can continue to execute and you will not make your browser unresponsive for the duration of the call.
Alternatively, which is not something I would never ever do, you can make your ajax call synchronous, using async: false like so:
$.ajax({ url: ..., async: false });
A generic answer:
There are only two methods available in async. programming: events and callbacks. Period.
(Technically speaking, there is not really a difference between the two on the lowest level, an "event" is just a (library) function - the one doing the event "firing" - executing all functions registered as listeners so it's the same as a callback - technically, i.e. when you write event.fire() or whatever the event syntax of your preferred lib it's synchronous invocation of all registered event handler functions). When to use one or the other is a matter of preference, convention and style when designing an API.)
Javascript programming, especially AJAX, is asynchronous by definition. So if you have an algorithm that needs to "wait" for something, you're better off reconsidering the algorithm. Ironically enough, Javascript syntax is not best suitable for async programming, but there are many libraries that help you keep callbacks under control and avoid spaghetti code.
Example of callbacks spaghetti:
function ajaxRequest(url1, function() {
animateSomething(div, function() {
ajaxRequest(url2, function() {
....
})
})
})
the same with async.js looks much cleaner:
async.series([
function(_) { ajaxRequest(url1, _) },
function(_) { animateSomething(div, _) },
function(_) { ajaxRequest(url2, _) }
])
there are many ways to do this one. one of the is passing a callback to the ajax (or at least a reference of it). your code #1 would be an example of that.
another is that you have a notifier object which you add the ajax success call to it. then you can have other functions (one or more) plug into it to listen for a "success" announcement.