We Keep Coding

Global flag returns one result while no flag returns multiple (JS Regex HELP) [duplicate]

I have the following code:
var str = "$123";
var re = /(\$[0-9]+(\.[0-9]{2})?)/;
var found = str.match(re);
alert(found[1]);
alert(found[0]);
I am trying to understand why found[0] and found[1] would contain $123. Why does it get it twice?
I would like to get all the "potential" prices just one, so for example if I have this string:
var str = "$123 $149 $150"; It would be:
found[0] = $123
found[1] = $149
found[2] = $150
And that would be it, the array found would not have more matches.
What is happening here? What am I missing?

That's because of the parenthesis around the whole expression : it defines a captured group.
When you don't use the g flag, match returns in an array :
the whole string if it matches the pattern
the captured group(s)
Here the captured group is the whole string.
What you seem to want is
"$123 $149 $150".match(/\$\d+(\.\d{0,2})?/g)
which returns
["$123", "$149", "$150"]
Reference : the MDN about regular expressions and flags

The first is the full match.
The second represents the outer subgroup you defined, which is the same as the full match in your case.
That particular subgroup doesn't really seem necessary, so you should be able to remove it. The inner group doesn't have a match for your particular string.
FYI, if you want to use a group, but make it non-capturing, you can add ?: inside the start of it.
var re = /(?:\$[0-9]+(\.[0-9]{2})?)/;
Again, the group here isn't doing you much good, but it shows the ?: in use.

Add the g flag to the end of your regex. Otherwise only the first match will be captured. With g, sub groups are not captured. You do not need them to be; the outer parentheses in your regex do not actually do anything.
var re = /\$[0-9]+(\.[0-9]{2})?/g;
You can explicitly suppress subgroup capture with (?:, but it doesn't matter with the g flag.

Regex to get the text between two characters?

I want to replace a text after a forward slash and before a end parantheses excluding the characters.
My text:
<h3>notThisText/IWantToReplaceThis)<h3>
$('h3').text($('h3').text().replace(regEx, 'textReplaced'));
Wanted result after replace:
notThisText/textReplaced)
I have tried
regex = /([^\/]+$)+/ //replaces the parantheses as well
regex = \/([^\)]+) //replaces the slash as well
but as you can see in my comments neither of these excludes both the slash and the end parantheses. Can someone help?

A pattern like /(?<=\/)[^)]+(?=\))/ won't work in JS as its regex engine does not support a lookbehind construct. So, you should use one of the following solutions:
s.replace(/(\/)[^)]+(\))/, '$1textReplaced$2')
s.replace(/(\/)[^)]+(?=\))/, '$1textReplaced')
s.replace(/(\/)[^)]+/, '$1textReplaced')
s.replace(/\/[^)]+\)/, '/textReplaced)')
The (...) forms a capturing group that can be referenced to with $ + number, a backreference, from the replacement pattern. The first solution is consuming / and ), and puts them into capturing groups. If you need to match consecutive, overlapping matches, use the second solution (s.replace(/(\/)[^)]+(?=\))/, '$1textReplaced')). If the ) is not required at the end, the third solution (replace(/(\/)[^)]+/, '$1textReplaced')) will do. The last solution (s.replace(/\/[^)]+\)/, '/textReplaced)')) will work if the / and ) are static values known beforehand.

You can use str.split('/')
var text = 'notThisText/IWantToReplaceThis';
var splited = text.split('/');
splited[1] = 'yourDesireText';
var output = splited.join('/');
console.log(output);

Try Following: In your case startChar='/', endChar = ')', origString=$('h3').text()
function customReplace(startChar, endChar, origString, replaceWith){
var strArray = origString.split(startChar);
return strArray[0] + startChar + replaceWith + endChar;
}

First of all, you didn't define clearly what is the format of the text which you want to replace and the non-replacement part. For example,
Does notThisText contain any slash /?
Does IWantToReplaceThis contain any parentheses )?
Since there are too many uncertainties, the answer here only shows up the pattern exactly matches your example:
yourText.replace(/(\/).*?(\))/g, '$1textReplaced$2')

var text = "notThisText/IWantToReplaceThis";
text = text.replace(/\/.*/, "/whatever");
output : "notThisText/whatever"`

Whats wrong with this regex logic

I am trying to fetch the value after equal sign, its works but i am getting duplicated values , any idea whats wrong here?
// Regex for finding a word after "=" sign
var myregexpNew = /=(\S*)/g;
// Regex for finding a word before "=" sign
var mytype = /(\S*)=/g;
//Setting data from Grid Column
var strNew = "QCById=20";
var matchNew = myregexpNew.exec(strNew);
var newtype = mytype.exec(strNew);
alert(matchNew);
https://jsfiddle.net/6vjjv0hv/

exec returns an array, the first element is the global match, the following ones are the submatches, that's why you get ["=20", "20"] (using console.log here instead of alert would make it clearer what you get).
When looking for submatches and using exec, you're usually interested in the elements starting at index 1.
Regarding the whole parsing, it's obvious there are better solution, like using only one regex with two submatches, but it depends on the real goal.

You can try without using Regex like this:
var val = 'QCById=20';
var myString = val.substr(val.indexOf("=") + 1);
alert(myString);
Presently exec is returning you the matched value.

REGEXP.exec(SOMETHING) returns an array (see https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/RegExp/exec).
The first item in the array is the full match and the rest matches the parenthesized substrings.

You do not get duplicated values, you just get an array of a matched value and the captured text #1.
See RegExp#exec() help:
If the match succeeds, the exec() method returns an array and updates properties of the regular expression object. The returned array has the matched text as the first item, and then one item for each capturing parenthesis that matched containing the text that was captured.
Just use the [1] index to get the captured text only.
var myregexpNew = /=(\S*)/g;
var strNew = "QCById=20";
var matchNew = myregexpNew.exec(strNew);
if (matchNew) {
console.log(matchNew[1]);
}
To get values on both sides of =, you can use /(\S*)=(\S*)/g regex:
var myregexpNew = /(\S*)=(\S*)/g;
var strNew = "QCById=20";
var matchNew = myregexpNew.exec(strNew);
if (matchNew) {
console.log(matchNew[1]);
console.log(matchNew[2]);
}
Also, you may want to add a check to see if the captured values are not undefined/empty since \S* may capture an empty string. OR use /(\S+)=(\S+)/g regex that requires at least one non-whitespace character to appear before and after the = sign.

Javascript - Regex finding multiple parentheses matches

So currently, my code works for inputs that contain one set of parentheses.
var re = /^.*\((.*\)).*$/;
var inPar = userIn.replace(re, '$1');
...meaning when the user enters the chemical formula Cu(NO3)2, alerting inPar returns NO3) , which I want.
However, if Cu(NO3)2(CO2)3 is the input, only CO2) is being returned.
I'm not too knowledgable in RegEx, so why is this happening, and is there a way I could put NO3) and CO2) into an array after they are found?

You want to use String.match instead of String.replace. You'll also want your regex to match multiple strings in parentheses, so you can't have ^ (start of string) and $ (end of string). And we can't be greedy when matching inside the parentheses, so we'll use .*?
Stepping through the changes, we get:
// Use Match
"Cu(NO3)2(CO2)3".match(/^.*\((.*\)).*$/);
["Cu(NO3)2(CO2)3", "CO2)"]
// Lets stop including the ) in our match
"Cu(NO3)2(CO2)3".match(/^.*\((.*)\).*$/);
["Cu(NO3)2(CO2)3", "CO2"]
// Instead of matching the entire string, lets search for just what we want
"Cu(NO3)2(CO2)3".match(/\((.*)\)/);
["(NO3)2(CO2)", "NO3)2(CO2"]
// Oops, we're being a bit too greedy, and capturing everything in a single match
"Cu(NO3)2(CO2)3".match(/\((.*?)\)/);
["(NO3)", "NO3"]
// Looks like we're only searching for a single result. Lets add the Global flag
"Cu(NO3)2(CO2)3".match(/\((.*?)\)/g);
["(NO3)", "(CO2)"]
// Global captures the entire match, and ignore our capture groups, so lets remove them
"Cu(NO3)2(CO2)3".match(/\(.*?\)/g);
["(NO3)", "(CO2)"]
// Now to remove the parentheses. We can use Array.prototype.map for that!
var elements = "Cu(NO3)2(CO2)3".match(/\(.*?\)/g);
elements = elements.map(function(match) { return match.slice(1, -1); })
["NO3", "CO2"]
// And if you want the closing parenthesis as Fabrício Matté mentioned
var elements = "Cu(NO3)2(CO2)3".match(/\(.*?\)/g);
elements = elements.map(function(match) { return match.substr(1); })
["NO3)", "CO2)"]

Your regex has anchors to match beginning and end of the string, so it won't suffice to match multiple occurrences. Updated code using String.match with the RegExp g flag (global modifier):
var userIn = 'Cu(NO3)2(CO2)3';
var inPar = userIn.match(/\([^)]*\)/g).map(function(s){ return s.substr(1); });
inPar; //["NO3)", "CO2)"]
In case you need old IE support: Array.prototype.map polyfill
Or without polyfills:
var userIn = 'Cu(NO3)2(CO2)3';
var inPar = [];
userIn.replace(/\(([^)]*\))/g, function(s, m) { inPar.push(m); });
inPar; //["NO3)", "CO2)"]
Above matches a ( and captures a sequence of zero or more non-) characters, followed by a ) and pushes it to the inPar array.
The first regex does essentially the same, but uses the entire match including the opening ( parenthesis (which is later removed by mapping the array) instead of a capturing group.
From the question I assume the closing ) parenthesis is expected to be in the resulting strings, otherwise here are the updated solutions without the closing parenthesis:
For the first solution (using s.slice(1, -1)):
var inPar = userIn.match(/\([^)]*\)/g).map(function(s){ return s.slice(1, -1);});
For the second solution (\) outside of capturing group):
userIn.replace(/\(([^)]*)\)/g, function(s, m) { inPar.push(m); });

You could try the below:
"Cu(NO3)2".match(/(\S\S\d)/gi) // returns NO3
"Cu(NO3)2(CO2)3".match(/(\S\S\d)/gi) // returns NO3 CO2

Javascript Regexp - Match Characters after a certain phrase

I was wondering how to use a regexp to match a phrase that comes after a certain match. Like:
var phrase = "yesthisismyphrase=thisiswhatIwantmatched";
var match = /phrase=.*/;
That will match from the phrase= to the end of the string, but is it possible to get everything after the phrase= without having to modify a string?

You use capture groups (denoted by parenthesis).
When you execute the regex via match or exec function, the return an array consisting of the substrings captured by capture groups. You can then access what got captured via that array. E.g.:
var phrase = "yesthisismyphrase=thisiswhatIwantmatched";
var myRegexp = /phrase=(.*)/;
var match = myRegexp.exec(phrase);
alert(match[1]);
or
var arr = phrase.match(/phrase=(.*)/);
if (arr != null) { // Did it match?
alert(arr[1]);
}

phrase.match(/phrase=(.*)/)[1]
returns
"thisiswhatIwantmatched"
The brackets specify a so-called capture group. Contents of capture groups get put into the resulting array, starting from 1 (0 is the whole match).

It is not so hard, Just assume your context is :
const context = "https://example.com/pa/GIx89GdmkABJEAAA+AAAA";
And we wanna have the pattern after pa/, so use this code:
const pattern = context.match(/pa\/(.*)/)[1];
The first item include pa/, but for the grouping second item is without pa/, you can use each what you want.

Let try this, I hope it work
var p = /\b([\w|\W]+)\1+(\=)([\w|\W]+)\1+\b/;
console.log(p.test('case1 or AA=AA ilkjoi'));
console.log(p.test('case2 or AA=AB'));
console.log(p.test('case3 or 12=14'));

If you want to get value after the regex excluding the test phrase, use this:
/(?:phrase=)(.*)/
the result will be
0: "phrase=thisiswhatIwantmatched" //full match
1: "thisiswhatIwantmatched" //matching group