I have a table containing cells with rowspan attributes, I would like to:
Whenever a tr is hidden, the table will rearrange itself correctly
Whenever a tr is shown again, it will be restored to original state
So if you have a table like this clicking on X shouldn't destroy the layout.
and click a come back button, should restore the original layout.
(try removing all rows from bottom-up, and than restoring them from right-to-left, this is a desired flow)
I had some semi-solutions, but all seem too complicated, and i'm sure there is a nice way to handle this.
OK I really spent a hell of a long time over this question, so here goes...
For those of you who just want to see the working solution, click here
Update: I've changed the visual columns calculation method to iterate over the table and create a 2-dimensional array, to see the old method which used the jQuery offset() method, click here. The code is shorter, but more time costly.
The problem exists because when we hide a row, whilst we want all the cells to be hidden, we want the pseudo-cells — that is, the cells that appear to be in the following rows due to the cells rowspan attribute — to persist. To get around this, whenever we come across a hidden cell with a rowspan, we try to move it down the the next visible row (decrementing it's rowspan value as we go). With either our original cell or it's clone, we then iterate down the table once more for every row that would contain a pseudo-cell, and if the row is hidden we decrement the rowspan again. (To understand why, look at the working example, and note that when the blue row is hidden, red cell 9's rowspan must be reduced from 2 to 1, else it would push green 9 right).
With that in mind, we must apply the following function whenever rows are shown/hidden:
function calculate_rowspans() {
// Remove all temporary cells
$(".tmp").remove();
// We don't care about the last row
// If it's hidden, it's cells can't go anywhere else
$("tr").not(":last").each(function() {
var $tr = $(this);
// Iterate over all non-tmp cells with a rowspan
$("td[rowspan]:not(.tmp)", $tr).each(function() {
$td = $(this);
var $rows_down = $tr;
var new_rowspan = 1;
// If the cell is visible then we don't need to create a copy
if($td.is(":visible")) {
// Traverse down the table given the rowspan
for(var i = 0; i < $td.data("rowspan") - 1; i ++) {
$rows_down = $rows_down.next();
// If our cell's row is visible then it can have a rowspan
if($rows_down.is(":visible")) {
new_rowspan ++;
}
}
// Set our rowspan value
$td.attr("rowspan", new_rowspan);
}
else {
// We'll normally create a copy, unless all of the rows
// that the cell would cover are hidden
var $copy = false;
// Iterate down over all rows the cell would normally cover
for(var i = 0; i < $td.data("rowspan") - 1; i ++) {
$rows_down = $rows_down.next();
// We only consider visible rows
if($rows_down.is(":visible")) {
// If first visible row, create a copy
if(!$copy) {
$copy = $td.clone(true).addClass("tmp");
// You could do this 1000 better ways, using classes e.g
$copy.css({
"background-color": $td.parent().css("background-color")
});
// Insert the copy where the original would normally be
// by positioning it relative to it's columns data value
var $before = $("td", $rows_down).filter(function() {
return $(this).data("column") > $copy.data("column");
});
if($before.length) $before.eq(0).before($copy);
else $(".delete-cell", $rows_down).before($copy);
}
// For all other visible rows, increment the rowspan
else new_rowspan ++;
}
}
// If we made a copy then set the rowspan value
if(copy) copy.attr("rowspan", new_rowspan);
}
});
});
}
The next, really difficult part of the question is calculating at which index to place the copies of the cells within the row. Note in the example, blue cell 2 has an actual index within its row of 0, i.e. it's the first actual cell within the row, however we can see that visually it lies in column 2 (0-indexed).
I took the approach of calculating this only once, as soon as the document is loaded. I then store this value as a data attribute of the cell, so that I can position a copy of it in the right place (I've had many Eureka moments on this one, and made many pages of notes!). To do this calculation, I ended up constructing a 2-dimensional Array matrix which keeps track of all of the used-visual columns. At the same time, I store the cells original rowspan value, as this will change with hiding/showing rows:
function get_cell_data() {
var matrix = [];
$("tr").each(function(i) {
var $cells_in_row = $("td", this);
// If doesn't exist, create array for row
if(!matrix[i]) matrix[i] = [];
$cells_in_row.each(function(j) {
// CALCULATE VISUAL COLUMN
// Store progress in matrix
var column = next_column(matrix[i]);
// Store it in data to use later
$(this).data("column", column);
// Consume this space
matrix[i][column] = "x";
// If the cell has a rowspan, consume space across
// Other rows by iterating down
if($(this).attr("rowspan")) {
// Store rowspan in data, so it's not lost
var rowspan = parseInt($(this).attr("rowspan"));
$(this).data("rowspan", rowspan);
for(var x = 1; x < rowspan; x++) {
// If this row doesn't yet exist, create it
if(!matrix[i+x]) matrix[i+x] = [];
matrix[i+x][column] = "x";
}
}
});
});
// Calculate the next empty column in our array
// Note that our array will be sparse at times, and
// so we need to fill the first empty index or push to end
function next_column(ar) {
for(var next = 0; next < ar.length; next ++) {
if(!ar[next]) return next;
}
return next;
}
}
Then simply apply this on page load:
$(document).ready(function() {
get_cell_data();
});
(Note: whilst the code here is longer than my jQuery .offset() alternative, it's probably quicker to calculate. Please correct me if I'm wrong).
Working solution - http://codepen.io/jmarroyave/pen/eLkst
This is basically the same solution that i presented before, i just changed how to get the column index to remove the restriction of the jquery.position, and did some refactor to the code.
function layoutInitialize(tableId){
var layout = String();
var maxCols, maxRows, pos, i, rowspan, idx, xy;
maxCols = $(tableId + ' tr').first().children().length;
maxRows = $(tableId + ' tr').length;
// Initialize the layout matrix
for(i = 0; i < (maxCols * maxRows); i++){
layout += '?';
}
// Initialize cell data
$(tableId + ' td').each(function() {
$(this).addClass($(this).parent().attr('color_class'));
rowspan = 1;
if($(this).attr('rowspan')){
rowspan = $(this).attr("rowspan");
$(this).data("rowspan", rowspan);
}
// Look for the next position available
idx = layout.indexOf('?');
pos = {x:idx % maxCols, y:Math.floor(idx / maxCols)};
// store the column index in the cell for future reposition
$(this).data('column', pos.x);
for(i = 0; i < rowspan; i++){
// Mark this position as not available
xy = (maxCols * pos.y) + pos.x
layout = layout.substr(0, xy + (i * maxCols)) + 'X' + layout.substr(xy + (i * maxCols) + 1);
}
});
}
Solution: with jquery.position() - http://codepen.io/jmarroyave/pen/rftdy
This is an alternative solution, it assumes that the first row contains all the information about the number of the table columns and the position of each on.
This aproach has the restriction that the inizialitation code must be call when the table is visible, because it depends on the visible position of the columns.
If this is not an issue, hope it works for you
Initialization
// Initialize cell data
$('td').each(function() {
$(this).addClass($(this).parent().attr('color_class'));
$(this).data('posx', $(this).position().left);
if($(this).attr('rowspan')){
$(this).data("rowspan", $(this).attr("rowspan"));
}
});
UPDATE
According to this post ensuring the visibility of the table can be manage with
$('table').show();
// Initialize cell data
$('td').each(function() {
$(this).addClass($(this).parent().attr('color_class'));
$(this).data('posx', $(this).position().left);
if($(this).attr('rowspan')){
$(this).data("rowspan", $(this).attr("rowspan"));
}
});
$('table').hide();
As Ian said, the main issue to solve in this problem is to calculate the position of the cells when merging the hidden with the visible rows.
I tried to figure it out how the browser implements that funcionality and how to work with that. Then looking the DOM i searched for something like columnVisiblePosition and i found the position attributes and took that way
function getColumnVisiblePostion($firstRow, $cell){
var tdsFirstRow = $firstRow.children();
for(var i = 0; i < tdsFirstRow.length; i++){
if($(tdsFirstRow[i]).data('posx') == $cell.data('posx')){
return i;
}
}
}
The js code
$(document).ready(function () {
add_delete_buttons();
$(window).on("tr_gone", function (e, tr) {
add_come_back_button(tr);
});
// Initialize cell data
$('td').each(function() {
$(this).addClass($(this).parent().attr('color_class'));
$(this).data('posx', $(this).position().left);
if($(this).attr('rowspan')){
$(this).data("rowspan", $(this).attr("rowspan"));
}
});
});
function calculate_max_rowspans() {
// Remove all temporary cells
$(".tmp").remove();
// Get all rows
var trs = $('tr'), tds, tdsTarget,
$tr, $trTarget, $td, $trFirst,
cellPos, cellTargetPos, i;
// Get the first row, this is the layout reference
$trFirst = $('tr').first();
// Iterate through all rows
for(var rowIdx = 0; rowIdx < trs.length; rowIdx++){
$tr = $(trs[rowIdx]);
$trTarget = $(trs[rowIdx+1]);
tds = $tr.children();
// For each cell in row
for(cellIdx = 0; cellIdx < tds.length; cellIdx++){
$td = $(tds[cellIdx]);
// Find which one has a rowspan
if($td.data('rowspan')){
var rowspan = Number($td.data('rowspan'));
// Evaluate how the rowspan should be display in the current state
// verify if the cell with rowspan has some hidden rows
for(i = rowIdx; i < (rowIdx + Number($td.data('rowspan'))); i++){
if(!$(trs[i]).is(':visible')){
rowspan--;
}
}
$td.attr('rowspan', rowspan);
// if the cell doesn't have rows hidden within, evaluate the next cell
if(rowspan == $td.data('rowspan')) continue;
// If this row is hidden copy the values to the next row
if(!$tr.is(':visible') && rowspan > 0) {
$clone = $td.clone();
// right now, the script doesn't care about copying data,
// but here is the place to implement it
$clone.data('rowspan', $td.data('rowspan') - 1);
$clone.data('posx', $td.data('posx'));
$clone.attr('rowspan', rowspan);
$clone.addClass('tmp');
// Insert the temp node in the correct position
// Get the current cell position
cellPos = getColumnVisiblePostion($trFirst, $td);
// if is the last just append it
if(cellPos == $trFirst.children().length - 1){
$trTarget.append($clone);
}
// Otherwise, insert it before its closer sibling
else {
tdsTarget = $trTarget.children();
for(i = 0; i < tdsTarget.length; i++){
cellTargetPos = getColumnVisiblePostion($trFirst, $(tdsTarget[i]));
if(cellPos < cellTargetPos){
$(tdsTarget[i]).before($clone);
break;
}
}
}
}
}
}
// remove tmp nodes from the previous row
if(rowIdx > 0){
$tr = $(trs[rowIdx-1]);
if(!$tr.is(':visible')){
$tr.children(".tmp").remove();
}
}
}
}
// this function calculates the position of a column
// based on the visible position
function getColumnVisiblePostion($firstRow, $cell){
var tdsFirstRow = $firstRow.children();
for(var i = 0; i < tdsFirstRow.length; i++){
if($(tdsFirstRow[i]).data('posx') == $cell.data('posx')){
return i;
}
}
}
function add_delete_buttons() {
var $all_rows = $("tr");
$all_rows.each(function () {
// TR to remove
var $tr = $(this);
var delete_btn = $("<button>").text("x");
delete_btn.on("click", function () {
$tr.hide();
calculate_max_rowspans();
$(window).trigger("tr_gone", $tr);
});
var delete_cell = $("<td>");
delete_cell.append(delete_btn);
$(this).append(delete_cell);
});
}
function add_come_back_button(tr) {
var $tr = $(tr);
var come_back_btn = $("<button>").text("come back " + $tr.attr("color_class"));
come_back_btn.css({"background": $(tr).css("background")});
come_back_btn.on("click", function () {
$tr.show();
come_back_btn.remove();
calculate_max_rowspans();
});
$("table").before(come_back_btn);
}
if you have any questions or comments let me know.
I'm assuming you want the the rows to shift upward when you hide the row but you do not want the cells to shift left.
Here is what I got http://codepen.io/anon/pen/prDcK
I added two css rules:
#come_back_container{height: 30px;}
td[rowspan='0']{background-color: white;}
Here is the html I used:
<div id="come_back_container"></div>
<table id="dynamic_table" cellpadding=7></table>
<table id="dynamic_table2" cellpadding=7>
<tr style="background-color: red">
<td rowspan="5">a</td>
<td rowspan="1">b</td>
<td rowspan="5">c</td>
<td rowspan="1">d</td>
<td rowspan="2">e</td>
</tr>
<tr style="background-color: grey">
<td rowspan="0">f</td>
<td rowspan="1">g</td>
<td rowspan="0">h</td>
<td rowspan="1">i</td>
<td rowspan="0">j</td>
</tr>
<tr style="background-color: blue">
<td rowspan="0">k</td>
<td rowspan="1">l</td>
<td rowspan="0">m</td>
<td rowspan="1">n</td>
<td rowspan="1">o</td>
</tr>
<tr style="background-color: yellow">
<td rowspan="0">p</td>
<td rowspan="1">q</td>
<td rowspan="0">r</td>
<td rowspan="1">s</td>
<td rowspan="2">t</td>
</tr>
<tr style="background-color: green">
<td rowspan="0">u</td>
<td rowspan="1">v</td>
<td rowspan="0">w</td>
<td rowspan="1">x</td>
<td rowspan="0">y</td>
</tr>
</table>
The first rule is just to keep the top edge of the table in the same place. The second rule is to make the cells appear blank by blending in with the background, so change accordingly.
Finally here is the js:
$(function () {
//firstTable()
var myTb2 = new dynamicTable();
myTb2.createFromElement( $("#dynamic_table2") );
myTb2.drawTable()
$(window).on("tr_hide", function (e,data){
var tbl = data.ctx,
rowIndex = data.idx;
tbl.hideRow.call(tbl, rowIndex);
})
$(window).on("tr_show", function (e,data){
var tbl = data.ctx,
rowIndex = data.idx;
tbl.showRow.call(tbl, rowIndex);
})
})
function dynamicTableItem(){
this.height = null;
this.content = null;
}
function dynamicTableRow(){
this.color = null;
this.items = []
this.show = true
this.setNumColumns = function(numCols){
for(var i=0;i<numCols;i++){
var item = new dynamicTableItem();
item.height = 0;
this.items.push(item)
}
}
this.addItem = function(index, height, content){
var item = new dynamicTableItem();
item.height = height;
item.content = content;
if(index>=this.items.length){ console.error("index out of range",index); }
this.items[index] = item;
}
}
function dynamicTable(){
this.element = null;
this.numCols = null;
this.rows = []
this.addRow = function(color){
var row = new dynamicTableRow();
row.color = color;
row.setNumColumns(this.numCols)
var length = this.rows.push( row )
return this.rows[length-1]
}
this.drawTable = function(){
this.element.empty()
var cols = [],
rowElements = [];
for(var i=0;i<this.numCols;i++){
cols.push( [] )
}
for(var r=0; r<this.rows.length; r++){
var row = this.rows[r]
if(row.show){
var $tr = $("<tr>"),
delete_cell = $("<td>"),
delete_btn = $("<button>").text("x")
var data = {ctx: this, idx: r};
delete_btn.on("click", data, function(e){
$(window).trigger("tr_hide", e.data);
})
delete_cell.addClass("deleteCell");
$tr.css( {"background": row.color} );
delete_cell.append(delete_btn);
$tr.append(delete_cell);
this.element.append($tr);
rowElements.push( $tr );
for(var i=0; i<row.items.length; i++){
cols[i].push( row.items[i] );
}
}
}
for(var c=0; c<cols.length; c++){
var cellsFilled = 0;
for(var r=0; r<cols[c].length; r++){
var item = cols[c][r]
var size = item.height;
if(r>=cellsFilled){
cellsFilled += (size>0 ? size : 1);
var el = $("<td>").attr("rowspan",size);
el.append(item.content);
rowElements[r].children().last().before(el);
}
}
}
}
this.hideRow = function(rowIndex){
var row = this.rows[rowIndex]
row.show = false;
var come_back_btn = $("<button>").text("come back");
come_back_btn.css( {"background": row.color} );
var data = {ctx:this, idx:rowIndex};
come_back_btn.on("click", data, function(e){
$(window).trigger("tr_show", e.data);
$(this).remove();
});
$("#come_back_container").append(come_back_btn);
this.drawTable();
}
this.showRow = function(rowIndex){
this.rows[rowIndex].show = true;
this.drawTable();
}
this.createFromElement = function(tbl){
this.element = tbl;
var tblBody = tbl.children().filter("tbody")
var rows = tblBody.children().filter("tr")
this.numCols = rows.length
for(var r=0;r<rows.length;r++){
var row = this.addRow( $(rows[r]).css("background-color") );
var items = $(rows[r]).children().filter("td");
for(var i=0;i<items.length;i++){
var item = $(items[i]);
var height = parseInt(item.attr("rowspan"));
var contents = item.contents();
row.addItem(i,height,contents);
}
}
//console.log(this);
}
}
function firstTable(){
var myTable = new dynamicTable();
myTable.element = $("#dynamic_table");
myTable.numCols = 5
var red = myTable.addRow("red");
red.addItem(0,5);
red.addItem(1,1);
red.addItem(2,5);
red.addItem(3,1);
red.addItem(4,2);
var white = myTable.addRow("grey");
//white.addItem(0,0);
white.addItem(1,1);
//white.addItem(2,0);
white.addItem(3,1);
//white.addItem(4,0);
var blue = myTable.addRow("blue");
//blue.addItem(0,3); //try uncommenting this and removing red
blue.addItem(1,1);
//blue.addItem(2,0);
blue.addItem(3,1);
blue.addItem(4,1);
var yellow = myTable.addRow("yellow");
//yellow.addItem(0,0);
yellow.addItem(1,1);
//yellow.addItem(2,0);
yellow.addItem(3,1);
yellow.addItem(4,2);
var green = myTable.addRow("green");
//green.addItem(0,0);
green.addItem(1,1);
//green.addItem(2,0);
green.addItem(3,1);
//green.addItem(4,0);
myTable.drawTable();
}
I tried to use clear variable and method names but if you have any quests just ask.
PS- I know there is no easy way to add content to the cells right now but you only asked for disappearing rows.
I have a table with n number of rows. The value of n changes/updates every minute.
The first <td> of every row will either contain some text, or it will be blank.
I want to delete/remove all the rows except, the first row and the row whose first cell contains the text 'xyz'.
So, how will I be able to do this?
This table element is stored in the variable parentTable.
I'm kind of new to javascript and programming. Any help would be appreciated. Thanks.
I tested it with just the second row, but nothing happened even though the text is not xyz in the cell.
if(parentNode.childNodes[1].innerText !== "xyz")
parentTable.deleteRow[1];
And how do I loop around every row and do this?
EDIT: HTML for first cell in every row.
<td class=wbwhite align=center width=40 style="border-top: none; border-left:none; border-right:none;">
<a href="www.kasdjfkasd.sadsdk.comi" class=pi>xyz</a>
</td>
Try this:
var table = parentTable;
var rowCount = table.rows.length;
for ( var i = 1; i < rowCount; i++ )
{
var row = table.rows[i];
var val= row.cells[0].childNodes[0].innerHTML.toString();
if ( 'xyz' != val )
{
table.deleteRow( i );
rowCount--;
i--;
}
}
Use this code (pure JavaScript):
(assuming table has id = tableId).
var all = document.querySelectorAll('#tableId > tbody > tr');
// i = 1 not i = 0 to keep the first row.
for (var i = 1; i < all.length; i++) {
var td = all[i].querySelectorAll('td')[0];
if ( td.textContent != "xyz" ) {
all[i].parentNode.removeChild(all[i]);
}
}
You can try this
var allRows = parentTable.getElementsByTagName('TR');
for(var i=1; i<allRows.length;)
{
var tr = allRows[i];
var firstTd = tr.getElementsByTagName('TD')[0];
if(firstTd.innerHTML !== 'xyz')
{
tr.parentNode.removeChild(tr);
}else{
i++;
}
}
Suppose I have these three spaces that are blank to start with. I want to change using innerHTML in JavaScript.
<p id="topname"></p>
<div id="table"></div>
<p id="botname"></p>
document.getElementById("topname").innerHTML = "Boy";
document.getElementById("botname").innerHTML = "Girl";
I managed to change topname and botname with the innerHTML. How do I change div id="table" to display an x by y (2x2, 4x4, 8x8,etc.) table?
Instead of replacing the <div> with a <table>, it is recommended to create a <table> as a child node of the <div> As long as you have not added additional styling to the <div> (like padding or margins), this will have no effect on the display.
A couple of loops to build <tr> and <td> will do the job. Here's a function that takes x and y:
function makeTable(rows, cols) {
// Create a table node
var tbl = document.createElement('table');
// Make a <tr> for each row
for (var i=0; i<rows; i++) {
var tr = document.createElement('tr');
// And make a <td> for eah col
for (var j=0; j<cols; j++) {
var td = document.createElement('td');
// Append them to the current tr
tr.appendChild(td);
}
// Append the row
tbl.appendChild(tr);
}
return tbl;
}
// Create a new 2x4 table with the function
var newTable = makeTable(2, 4);
// And append it as a child to the <div id='table'>
document.getElementById('table').appendChild(newTable);
Here it is in action
You should be able to do it the same way, however, that div id might be giving you issues. TABLE is an html entity unto itself. I would rename that.
document.getElementById("table").innerHTML = "<table><caption>Caption</caption><thead>Table Header</thead><tfoot>Table Footer</tfoot><tbody><tr><td>1</td><td>2</td></tr><tr><td>3</td><td>4</td></tr></tbody></table>";
And what Shadow Wizard said above. It is best to use the right tool for the job. My answer is solely if you insist on doing it within a div.
First of all, change your div to a table manually:
<table id="table"></table>
With following code you can fill your table with rows and columns:
document.getElementById("table").appendChild(makeTable(2, 4));
function makeTable(rows, cols) {
var table = document.createDocumentFragment(), tr = document.createElement("tr"), td = document.createElement("td"), i, j;
for(j = 0; j < cols; j++) tr.appenChild(td.cloneNode(true));
for(i = 0; i < rows; i++) table.appendChild(tr.cloneNode(true));
return table;
}
I have multiple column headers that spans of multiple column and I would like to find the correct header number/count for the columns.
I want to enter a column number and get the header: example column 5 is RDataTest6 $('td.eq(5)) and its header is HTest3 $('th.eq(2))
Example:
<table>
<tr>
<th>HTest1</th>
<th colSpan="2">HTest2</th>
<th colSpan="4">HTest3</th>
<th colSpan="2">HTest4</th>
</tr>
<tr>
<td>RDataTest1</td>
<td>RDataTest2</td>
<td>RDataTest3</td>
<td>RDataTest4</td>
<td>RDataTest5</td>
<td>RDataTest6</td>
<td>RDataTest7</td>
<td>RDataTest8</td>
<td>RDataTest9</td>
</tr>
</table>
Edit: You should implement a simple array that hold the header location, see below,
var thLocator = [], colCount = 1;
$table.find('tr:first th').each(function () {
for (var i = 0; i < this.colSpan; i++) {
thLocator.push(colCount);
}
colCount++;
});
$table.find('td').click(function () {
alert(thLocator[$(this).index()]);
});
And then anytime You can get the location of a td column. See DEMO -> Click on any TD to identify its col head position.
I am not sure which count you want so I wrote down all col count. See DEMO
$(function() {
var $table = $('table');
alert('Table Header Count ' + $table.find('tr:first th').length);
var thCount = 0;
$table.find('tr:first th').each(function () {
thCount += this.colSpan;
});
alert('Computed TH Count ' + thCount );
alert('Table TD Col Count ' + $table.find('tr:eq(1) td').length);
});
That's easy, as long as you don't have any rowspans:
function getCell(tr, col) {
var cell = tr.firstElementChild;
while (cell && (col -= cell.colSpan || 1)>=0)
cell = cell.nextElementSibling;
return cell;
}
See demonstration.
I've a GridView with three rows like this
<tr>
<th>SlNo</th>
</tr>
<tr>
<td>1</td>
</tr>
<tr>
<td>2</td>
</tr>
I've the following code to traverse through the rows
var GridViewRow=GridView.getElementsByTagName('tr')
Here the row length is 3.
I travese through the GridViewRow using for loop .Here how will i get the tag name of the current element ie (th or td).
If the tagname is "TH" it should return and if it is "TD" it should take the value of TD.
How about this
var table = document.getElementById("mytab1");
for (var i = 0, cell; cell = table.cells[i]; i++) {
//iterate through cells
//cells would be accessed using the "cell" variable assigned in the for loop
}
you can also try out
var tbl = document.getElementById('yourTableId');
var rows = tbl.getElementsByTagName('tr');
for (var i = 0; i < rows.length; i++)
{
if(rows[i].getElementsByTagName('td').length > 0)
{
//code to execute
}
else
{
continue;
}
}
var GridViewRow = GridView.getElementsByTagName('tr');
$(GridViewRow).each(function() {
var $this = $(this), td = $this.find('td');
if (td.length === 1) {
console.log(td.text());
}
});
this works for <tr> in which you have exactly one <td> if you use jquery, otherwise in plain javascript try this:
var GridViewRow = GridView.getElementsByTagName('tr'),
len = GridViewRow.length,
td;
while (--len) {
td = GridViewRow[len].getElementsByTagName('td');
if (td.length === 1) {
console.log(td[0].innerHTML);
}
}
});
You can check the tag name with jQuery :
$(this).attr("tag");
Later edit:
For raw javascript, use tagName:
element.tagName