We Keep Coding

How would I make this function repeat? [duplicate]

I want repeat this code every 4 seconds, how i can do it with javascript or jquery easly ? Thanks. :)
$.get("request2.php", function(vystup){
if (vystup !== ""){
$("#prompt").html(vystup);
$("#prompt").animate({"top": "+=25px"}, 500).delay(2000).animate({"top": "-=25px"}, 500).delay(500).html("");
}
});

Use setInterval function
setInterval( fn , miliseconds )
From MDC docs:
Summary
Calls a function repeatedly, with a fixed time delay between each call to that function.
Syntax
var intervalID = window.setInterval(func, delay[, param1, param2, ...]);
var intervalID = window.setInterval(code, delay);
where
intervalID is a unique interval ID you can pass to clearInterval().
func is the function you want to be called repeatedly.
code in the alternate syntax, is a string of code you want to be executed repeatedly. (Using this syntax is not recommended for the same reasons as using eval())
delay is the number of milliseconds (thousandths of a second) that the setInterval() function should wait before each call to func. As with setTimeout, there is a minimum delay enforced.
Note that passing additional parameters to the function in the first syntax does not work in Internet Explorer.
Example
// alerts "Hey" every second
setInterval(function() { alert("Hey"); }, 1000);

setInterval(function(){
// your code...
}, 4000);

It's not too hard in javascript.
// declare your variable for the setInterval so that you can clear it later
var myInterval;
// set your interval
myInterval = setInterval(whichFunction,4000);
whichFunction{
// function code goes here
}
// this code clears your interval (myInterval)
window.clearInterval(myInterval);
Hope this helps!

Another possibility is to use setTimeout, but place it along with your code in a function that gets called recursively in the callback to the $.get() request.
This will ensure that the requests are a minimum of 4 seconds apart since the next request will not begin until the previous response was received.
// v--------place your code in a function
function get_request() {
$.get("request2.php", function(vystup){
if (vystup !== ""){
$("#prompt").html(vystup)
.animate({"top": "+=25px"}, 500)
.delay(2000)
.animate({"top": "-=25px"}, 500)
.delay(500)
.html("");
}
setTimeout( get_request, 4000 ); // <-- when you ge a response, call it
// again after a 4 second delay
});
}
get_request(); // <-- start it off

const milliseconds = 4000
setInterval(
() => {
// self executing repeated code below
}, milliseconds);

Call a Javascript function every 2 second continuously for 20 second.
var intervalPromise;
$scope.startTimer = function(fn, delay, timeoutTime) {
intervalPromise = $interval(function() {
fn();
var currentTime = new Date().getTime() - $scope.startTime;
if (currentTime > timeoutTime){
$interval.cancel(intervalPromise);
}
}, delay);
};
$scope.startTimer(hello, 2000, 10000);
hello(){
console.log("hello");
}

How to autorefresh my Ajax inside of a condition [duplicate]

Using setTimeout() it is possible to launch a function at a specified time:
setTimeout(function, 60000);
But what if I would like to launch the function multiple times? Every time a time interval passes, I would like to execute the function (every 60 seconds, let's say).

If you don't care if the code within the timer may take longer than your interval, use setInterval():
setInterval(function, delay)
That fires the function passed in as first parameter over and over.
A better approach is, to use setTimeout along with a self-executing anonymous function:
(function(){
// do some stuff
setTimeout(arguments.callee, 60000);
})();
that guarantees, that the next call is not made before your code was executed. I used arguments.callee in this example as function reference. It's a better way to give the function a name and call that within setTimeout because arguments.callee is deprecated in ecmascript 5.

use the
setInterval(function, 60000);
EDIT : (In case if you want to stop the clock after it is started)
Script section
<script>
var int=self.setInterval(function, 60000);
</script>
and HTML Code
<!-- Stop Button -->
Stop

A better use of jAndy's answer to implement a polling function that polls every interval seconds, and ends after timeout seconds.
function pollFunc(fn, timeout, interval) {
var startTime = (new Date()).getTime();
interval = interval || 1000;
(function p() {
fn();
if (((new Date).getTime() - startTime ) <= timeout) {
setTimeout(p, interval);
}
})();
}
pollFunc(sendHeartBeat, 60000, 1000);
UPDATE
As per the comment, updating it for the ability of the passed function to stop the polling:
function pollFunc(fn, timeout, interval) {
var startTime = (new Date()).getTime();
interval = interval || 1000,
canPoll = true;
(function p() {
canPoll = ((new Date).getTime() - startTime ) <= timeout;
if (!fn() && canPoll) { // ensures the function exucutes
setTimeout(p, interval);
}
})();
}
pollFunc(sendHeartBeat, 60000, 1000);
function sendHeartBeat(params) {
...
...
if (receivedData) {
// no need to execute further
return true; // or false, change the IIFE inside condition accordingly.
}
}

In jQuery you can do like this.
function random_no(){
var ran=Math.random();
jQuery('#random_no_container').html(ran);
}
window.setInterval(function(){
/// call your function here
random_no();
}, 6000); // Change Interval here to test. For eg: 5000 for 5 sec
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<div id="random_no_container">
Hello. Here you can see random numbers after every 6 sec
</div>

setInterval(fn,time)
is the method you're after.

You can simply call setTimeout at the end of the function. This will add it again to the event queue. You can use any kind of logic to vary the delay values. For example,
function multiStep() {
// do some work here
blah_blah_whatever();
var newtime = 60000;
if (!requestStop) {
setTimeout(multiStep, newtime);
}
}

Use window.setInterval(func, time).

A good example where to subscribe a setInterval(), and use a clearInterval() to stop the forever loop:
function myTimer() {
}
var timer = setInterval(myTimer, 5000);
call this line to stop the loop:
clearInterval(timer);

Call a Javascript function every 2 second continuously for 10 second.
var intervalPromise;
$scope.startTimer = function(fn, delay, timeoutTime) {
intervalPromise = $interval(function() {
fn();
var currentTime = new Date().getTime() - $scope.startTime;
if (currentTime > timeoutTime){
$interval.cancel(intervalPromise);
}
}, delay);
};
$scope.startTimer(hello, 2000, 10000);
hello(){
console.log("hello");
}

function random(number) {
return Math.floor(Math.random() * (number+1));
}
setInterval(() => {
const rndCol = 'rgb(' + random(255) + ',' + random(255) + ',' + random(255) + ')';//rgb value (0-255,0-255,0-255)
document.body.style.backgroundColor = rndCol;
}, 1000);
<script src="test.js"></script>
it changes background color in every 1 second (written as 1000 in JS)

// example:
// checkEach(1000, () => {
// if(!canIDoWorkNow()) {
// return true // try again after 1 second
// }
//
// doWork()
// })
export function checkEach(milliseconds, fn) {
const timer = setInterval(
() => {
try {
const retry = fn()
if (retry !== true) {
clearInterval(timer)
}
} catch (e) {
clearInterval(timer)
throw e
}
},
milliseconds
)
}

here we console natural number 0 to ......n (next number print in console every 60 sec.) , using setInterval()
var count = 0;
function abc(){
count ++;
console.log(count);
}
setInterval(abc,60*1000);

I see that it wasn't mentioned here if you need to pass a parameter to your function on repeat setTimeout(myFunc(myVal), 60000); will cause an error of calling function before the previous call is completed.
Therefore, you can pass the parameter like
setTimeout(function () {
myFunc(myVal);
}, 60000)
For more detailed information you can see the JavaScript garden.
Hope it helps somebody.

I favour calling a function that contains a loop function that calls a setTimeout on itself at regular intervals.
function timer(interval = 1000) {
function loop(count = 1) {
console.log(count);
setTimeout(loop, interval, ++count);
}
loop();
}
timer();

There are 2 ways to call-
setInterval(function (){ functionName();}, 60000);
setInterval(functionName, 60000);
above function will call on every 60 seconds.

javascript timer counting very fast as time passes

I want a counter which reset in specific interval of time. I wrote this code. When I refresh the page it is executing perfectly. But as time passes the timer goes really fast, skipping seconds. Any idea why this is happening.
function countdown_new() {
window.setInterval(function () {
var timeCounter = $("b[id=show-time]").html();
var updateTime = eval(timeCounter) - eval(1);
$("b[id=show-time]").html(updateTime);
if (updateTime == 0) {
//window.location = ("ajax_chart.php");
$("b[id=show-time]").html(5);
clearInterval(countdown_new());
// countdown_new();
//my_ajax();
}
}, 1000);
}
window.setInterval(function () {
countdown_new();
}, 5000)
HTML
Coundown in 5 seconds

The issue is because you are not clearing the previous timer before starting a new one, so you start a new one for each iteration. To clear the timer you should save a reference to it, and pass that to clearInterval, not a function reference.
Also, note that your pattern of using multiple intervals for different operations can lead to overlap (where two intervals are acting at the same time and cause odd behaviour). Instead, use setTimeout for the initial 5 second delay and then chain further calls to stop this overlap.
Try this:
var timer;
function countdown_new() {
timer = setInterval(function () {
var $showTime = $("#show-time")
var updateTime = parseInt($showTime.text(), 10) - 1;
$showTime.html(updateTime);
if (updateTime == 0) {
$showTime.html('5');
clearInterval(timer);
setTimeout(countdown_new, 5000);
}
}, 1000);
}
setTimeout(countdown_new, 5000);
Example fiddle
Note that you should use the # selector to select an element by its id attribute, and you should never use eval - especially not for type coercion. To convert a value to an integer use parseInt().

You are calling window.setInterval(), which schedules a function call to countdown_new() ever 5 seconds without stop.
Compounding the problem, you are calling countdown_new() again inside your clear interval.
You need to call setInterval just once to continuously execute a function every 5 seconds.
If you want to cancel an interval timer, you need do to this:
var intervalObj = setInterval(function() { ... }, 5000);
clearInterval(intervalObj);

Yes clearinterval does the trick.
function countdown_new(){
t = window.setInterval(function() {
var timeCounter = $("b[id=show-time]").html();
var updateTime = eval(timeCounter)- eval(1);
$("b[id=show-time]").html(updateTime);
if(updateTime == 0){
//window.location = ("ajax_chart.php");
$("b[id=show-time]").html(5);
clearInterval(t);
// countdown_new();
my_ajax();
}
}, 1000);
}

settimeout being ignore, function is called instantly

function ShowColoursScreen() {
setSquaresList()
$("#ModeOne").hide();
$("#ModeTwo").show();
setTimeout(function () {
$("#ModeOne").show();
$("#ModeTwo").hide();
setTimeout(function () {
ShowColoursScreen();
}, 1500);
}, 15000);
}
This is very very weird, Im wanting to rotated between two divs every 15 seconds (i dont want to use js intervals). However after the first fifteen seconds ShowColoursScreen(); runs without waiting the second 15 seconds (if that makes sense). Its like the timeout gets ignored, any ideas?

Your code is correct. However, the inner timeout just waits for 1.5 seconds as you forgot a zero. Simply replace the 1500 with 15000.
You can also simplify the call a bit - as you do not have any arguments there is no need for the anonymous function: setTimeout(ShowColoursScreen, 15000);

function ShowColoursScreen($elements) {
if(!$elements instanceof jQuery) {
$elements = $($elements);
}
var current = 0;
// What does this function do?
setSquaresList();
function showCurrent () {
var $currentElement = $($elements[current]);
$elements.not($currentElement).hide();
$currentElement.show();
(current++) % $elements.length;
setTimeout(showCurrent, 15000);
}
showCurrent();
return $elements;
}
ShowColoursScreen('#ModeOne, #ModeTwo')

How can I call a function every 3 seconds for 15 seconds?

How do I call a jQuery function every 3 seconds?
$(document).ready(function ()
{
//do stuff...
$('post').each(function()
{
//do stuff...
})
//do stuff...
})
I'm trying to run that code for a period of 15 seconds.

None of the answers so far take into account that it only wants to happen for 15 seconds and then stop...
$(function() {
var intervalID = setInterval(function() {
// Do whatever in here that happens every 3 seconds
}, 3000);
setTimeout(function() {
clearInterval(intervalID);
}, 18000);
});
This creates an interval (every 3 seconds) that runs whatever code you put in the function. After 15 seconds the interval is destroyed (there is an initial 3 second delay, hence the 18 second overall runtime).

You can use setTimeout to run a function after X milliseconds have passed.
var timeout = setTimeout(function(){
$('post').each(function(){
//do stuff...
});
}, 3000);
Or, setInterval to run a function every X milliseconds.
var interval = setInterval(function(){
$('post').each(function(){
//do stuff...
});
}, 3000);
setTimeout and setInterval return IDs, these can be used to clear the timeout/interval using clearTimeout or clearInterval.

setInterval(function() {
// Do something every 3 seconds
}, 3000);

Use the setInterval function.
var doPost = function() {
$('post').each(function() {
...
});
};
setInterval(function() { doPost(); }, 3000);

You could use the setTimeout method also, which supports things like cancelling the timer.
See: http://msdn.microsoft.com/en-us/library/ie/ms536753(v=vs.85).aspx